JAJSOB7 データシート

JAJSOB7B march 2022 – june 2023 AFE7903

PRODUCTION DATA

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）

ABJ|400
- MCBG079C
ALK|400
- MPBGAU3B

サーマルパッド・メカニカル・データ

発注情報

6.12.9 TX Typical Characteristics at 800 MHz

Typical values at T_A = +25°C with nominal supplies. Unless otherwise noted, TX input data rate = 491.52 MSPS, f_DAC = 11796.48 MSPS, interleave mode, A_OUT = –1 dBFS, 1^st Nyquist zone output, Internal PLL, f_REF = 491.52 MSPS, 24x Interpolation, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated

Including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHz matching

Figure 6-293 TX Full Scale vs RF Frequency and Channel at 5898.24 MSPS, Straight Mode

Including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHz matching

Figure 6-295 TX Full Scale vs RF Frequency and Channel at 5898.24 MSPS, Interleave Mode

Including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHz matching

Figure 6-297 TX Full Scale vs RF Frequency and Channel at 11796.48 MSPS, Interleave Mode

including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHz matching

Figure 6-299 TX Output Fullscale vs Temperature

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Gain Error = P_OUT(DSA Setting – 1) – P_OUT(DSA Setting) + 1

Figure 6-301 TX Uncalibrated Differential Gain Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Gain Error = P_OUT(DSA Setting ) – P_OUT(DSA Setting = 0) + DSA Settings

Figure 6-303 TX Uncalibrated Integrated Gain Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Gain Error = P_OUT(DSA Setting – 1) – P_OUT(DSA Setting) + 1

Figure 6-305 TX Uncalibrated Differential Gain Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Gain Error = P_OUT(DSA Setting ) – P_OUT(DSA Setting = 0) + DSA Setting

Figure 6-307 TX Uncalibrated Integrated Gain Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Phase Error = Phase_OUT(DSA Setting – 1) – Phase_OUT(DSA Setting)

Figure 6-309 TX Uncalibrated Differential Phase Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Phase Error = Phase_OUT(DSA Setting) – Phase_OUT(DSA Setting = 0)

Figure 6-311 TX Uncalibrated Integrated Phase Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Phase Error = Phase_OUT(DSA Setting – 1) – Phase_OUT(DSA Setting) + 1

Figure 6-313 TX Uncalibrated Differential Phase Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Phase Error = Phase_OUT(DSA Setting) – Phase_OUT(DSA Setting = 0)

Figure 6-315 TX Uncalibrated Integrated Phase Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz, P_OUT = –13 dBFS

Figure 6-317 TX Output Noise vs Channel and Attenuation at 0.85 GHz

f_DAC = 5898.24 MSPS, straight mode, f_CENTER = 0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone

Figure 6-319 TX IMD3 vs Tone Spacing and Channel at 0.85 GHz

f_DAC = 11796.48 MSPS, interleave mode, f_CENTER = 0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone

Figure 6-321 TX IMD3 vs Tone Spacing and Channel at 0.85 GHz

f_DAC = 8847.36 MSPS, straight mode, f_CENTER = 0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone, worst channel

Figure 6-323 TX IMD3 vs Tone Spacing and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, straight mode, f_CENTER = 0.85 GHz, f_SPACING = 20 MHz, matching at 0.8 GHz

Figure 6-325 TX IMD3 vs Digital Level at 0.85 GHz

f_DAC = 11796.48 MSPS, interleave mode, f_CENTER = 0.85 GHz, f_SPACING = 20 MHz, matching at 0.8 GHz

Figure 6-327 TX IMD3 vs Digital Level at 0.85 GHz

TM1.1, P_{OUT_RMS} = –13 dBFS

Figure 6-329 TX 20-MHz LTE Output Spectrum at 0.85 GHz

Matching at 0.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-331 TX 20-MHz LTE alt-ACPR vs Digital Level at 0.85 GHz

Matching at 0.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-333 TX 20-MHz LTE ACPR vs DSA at 0.85 GHz

Matching at 0.8 GHz, single carrier 100-MHz BW TM1.1 NR

Figure 6-335 TX 100-MHz NR ACPR vs DSA at 0.85 GHz

Matching at 0.8 GHz, f_DAC = 5898.24 GSPS, straight mode

Figure 6-337 TX HD2 vs Digital Amplitude and Output Frequency at 0.85 GHz

Matching at 0.8 GHz, f_DAC = 5898.24 MSPS, straight mode, normalized to output power at harmonic frequency

Figure 6-339 TX HD3 vs Digital Amplitude and Output Frequency at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, 0.8 GHz matching, includes PCB and cable losses. ILn = f_S/n ± f_OUT.

Figure 6-341 TX Single Tone (–12 dBFS) Output Spectrum at 0.85 GHz (0-f_DAC)

f_DAC = 5898.24 MSPS, interleave mode, 0.8 GHz matching, includes PCB and cable losses. ILn = f_S/n ± f_OUT.

Figure 6-343 TX Single Tone (–6 dBFS) Output Spectrum at 0.85 GHz (0-f_DAC)

f_DAC = 5898.24MSPS, interleave mode, 0.8 GHz matching, includes PCB and cable losses. ILn = f_S/n ± f_OUT.

Figure 6-345 TX Single Tone (–1 dBFS) Output Spectrum at 0.85 GHz (0-f_DAC)

f_DAC = 5898.24MSPS, straight mode, 0.8 GHz matching, includes PCB and cable losses. ILn = f_S/n ± f_OUT and is due to mixing with digital clocks.

Figure 6-347 TX Single Tone (–12 dBFS) Output Spectrum at 0.85 GHz (0-f_DAC)

f_DAC = 5898.24MSPS, straight mode, 0.8 GHz matching, includes PCB and cable losses. ILn = f_S/n ± f_OUT and is due to mixing with digital clocks.

Figure 6-349 TX Single Tone (–6 dBFS) Output Spectrum at 0.85 GHz (0-f_DAC)

f_DAC = 5898.24 MSPS, straight mode, 0.8 GHz matching, includes PCB and cable losses. ILn = f_S/n ± f_OUT and is due to mixing with digital clocks.

Figure 6-351 TX Single Tone (–1 dBFS) Output Spectrum at 0.85 GHz (0-f_DAC)

Including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHzmatching

Figure 6-294 TX Full Scale vs RF Frequency and Channel at 8847.36 MSPS, Straight Mode

Including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHz matching

Figure 6-296 TX Full Scale vs RF Frequency and Channel at 8847.36 MSPS, Interleave Mode

including PCB and cable losses, A_out = -0.5 dFBS, DSA = 0, 0.8 GHz matching

Figure 6-298 TX Output Fullscale vs Output Frequency

f_DAC = 11796.48 MSPS, interleave mode, A_out = -0.5 dFBS, matching 0.8 GHz

Figure 6-300 TX Output Power vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Gain Error = P_OUT(DSA Setting – 1) – P_OUT(DSA Setting) + 1

Figure 6-302 TX Calibrated Differential Gain Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Gain Error = P_OUT(DSA Setting ) – P_OUT(DSA Setting = 0) + DSA Setting

Figure 6-304 TX Calibrated Integrated Gain Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Gain Error = P_OUT(DSA Setting – 1) – P_OUT(DSA Setting) + 1

Figure 6-306 TX Calibrated Differential Gain Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Gain Error = P_OUT(DSA Setting ) – P_OUT(DSA Setting = 0) + DSA Setting

Figure 6-308 TX Calibrated Integrated Gain Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Differential Phase Error = Phase_OUT(DSA Setting – 1) – Phase_OUT(DSA Setting)
Phase DNL spike may occur at any DSA setting.

Figure 6-310 TX Calibrated Differential Phase Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Phase Error = Phase_OUT(DSA Setting) – Phase_OUT(DSA Setting = 0)

Figure 6-312 TX Calibrated Integrated Phase Error vs DSA Setting and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz, channel with the median variation over DSA setting at 25°C
Differential Phase Error = Phase_OUT(DSA Setting – 1) – Phase_OUT(DSA Setting) + 1

Figure 6-314 TX Calibrated Differential Phase Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, matching at 0.8 GHz
Integrated Phase Error = Phase_OUT(DSA Setting) – Phase_OUT(DSA Setting = 0)

Figure 6-316 TX Calibrated Integrated Phase Error vs DSA Setting and Temperature at 0.85 GHz

f_DAC = 11796.48 MSPS, interleave mode, f_CENTER = 0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone

Figure 6-318 TX IMD3 vs DSA Setting at 0.85 GHz

f_DAC = 8847.36 MSPS, straight mode, f_CENTER = 0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone

Figure 6-320 TX IMD3 vs Tone Spacing and Channel at 0.85 GHz

f_DAC = 5898.24 MSPS, straight mode, f_CENTER =0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone, worst channel

Figure 6-322 TX IMD3 vs Tone Spacing and Temperature at 0.85 GHz

f_DAC = 11796.48 MSPS, straight mode, f_CENTER = 0.85 GHz, matching at 0.8 GHz, –13 dBFS each tone, worst channel

Figure 6-324 TX IMD3 vs Tone Spacing and Temperature at 0.85 GHz

f_DAC = 8847.36 MSPS, straight mode, f_CENTER = 0.85 GHz, f_SPACING = 20 MHz, matching at 0.8 GHz

Figure 6-326 TX IMD3 vs Digital Level at 0.85 GHz

Matching at 0.8 GHz, Single tone, f_DAC = 11.79648 GSPS, interleave mode, 40-MHz offset, DSA = 0dB

Figure 6-328 TX Single Tone Output Noise vs Frequency and Amplitude at 0.85 GHz

Matching at 0.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-330 TX 20-MHz LTE ACPR vs Digital Level at 0.85 GHz

Matching at 0.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-332 TX 20-MHz LTE alt2-ACPR vs Digital Level at 0.85 GHz

Matching at 0.8 GHz, single carrier 20-MHz BW TM1.1 LTE

Figure 6-334 TX 20-MHz LTE alt-ACPR vs DSA at 0.85 GHz

Matching at 0.8 GHz, single carrier 100-MHz BW TM1.1 NR

Figure 6-336 TX 100-MHz NR alt-ACPR vs DSA at 0.85 GHz

Matching at 0.8 GHz, f_DAC = 8847.36 GSPS, straight mode

Figure 6-338 TX HD2 vs Digital Amplitude and Output Frequency at 0.85 GHz

Matching at 0.8 GHz, f_DAC = 8847.36 MSPS, straight mode, normalized to output power at harmonic frequency

Figure 6-340 TX HD3 vs Digital Amplitude and Output Frequency at 0.85 GHz

f_DAC = 5898.24 MSPS, interleave mode, 0.8 GHz matching, includes PCB and cable losses

Figure 6-342 TX Single Tone (–12 dBFS) Output Spectrum at 0.85 GHz (±300 MHz)

f_DAC = 5898.24MSPS, interleave mode, 0.8 GHz matching, includes PCB and cable losses

Figure 6-344 TX Single Tone (–6 dBFS) Output Spectrum at 0.85 GHz (±300 MHz)

f_DAC = 5898.24MSPS, interleave mode, 0.8 GHz matching, includes PCB and cable losses

Figure 6-346 TX Single Tone (–1 dBFS) Output Spectrum at 0.85 GHz (±300 MHz)

f_DAC = 5898.24 MSPS, straight mode, 0.8 GHz matching, includes PCB and cable losses

Figure 6-348 TX Single Tone (–12 dBFS) Output Spectrum at 0.85 GHz (±300 MHz)

f_DAC = 5898.24 MSPS, straight mode, 0.8 GHz matching, includes PCB and cable losses

Figure 6-350 TX Single Tone (–6 dBFS) Output Spectrum at 0.85 GHz (±300 MHz)

f_DAC = 5898.24MSPS, straight mode, 0.8 GHz matching, includes PCB and cable losses

Figure 6-352 TX Single Tone (–1 dBFS) Output Spectrum at 0.85 GHz (±300 MHz)