JAJSPF6A December   2022  – October 2023 BQ27427

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Supply Current
    6. 5.6  Digital Input and Output DC Characteristics
    7. 5.7  LDO Regulator, Wake-up, and Auto-Shutdown DC Characteristics
    8. 5.8  LDO Regulator, Wake-up, and Auto-Shutdown AC Characteristics
    9. 5.9  ADC (Temperature and Cell Measurement) Characteristics
    10. 5.10 Integrating ADC (Coulomb Counter) Characteristics
    11. 5.11 Integrated Sense Resistor Characteristics, –40°C to 85 °C
    12. 5.12 I2C-Compatible Interface Communication Timing Characteristics
    13. 5.13 SHUTDOWN and WAKE-UP Timing
    14. 5.14 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Communications
        1. 6.3.1.1 I2C Interface
        2. 6.3.1.2 I2C Time Out
        3. 6.3.1.3 I2C Command Waiting Time
        4. 6.3.1.4 I2C Clock Stretching
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 BAT Voltage Sense Input
        2. 7.2.2.2 Integrated LDO Capacitor
      3. 7.2.3 External Thermistor Support
      4. 7.2.4 Application Curves
  9. 8 Power Supply Recommendation
    1. 8.1 Power Supply Decoupling
  10. 9 Layout
    1. 9.1 Layout Guidelines
    2. 9.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 サード・パーティ製品に関する免責事項
      2. 10.1.2 Related Documentation
    2. 10.2 Trademarks
    3. 10.3 静電気放電に関する注意事項
    4. 10.4 用語集
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

4 Pin Configuration and Functions

GUID-02B87326-8B36-41A4-AAAE-10550B2D8249-low.svg Figure 4-1 Top View
GUID-FEE0BD65-CC06-4B49-AD40-B4567F86BA7C-low.svg Figure 4-2 Bottom View
Table 4-1 Pin Functions
PIN TYPE(1) DESCRIPTION
NAME NUMBER
BAT C3 PI, AI LDO regulator input and battery voltage measurement input. Kelvin sense connect to positive battery terminal (PACKP). Connect a capacitor (1 µF) between BAT and VSS. Place the capacitor close to the gauge.
BIN B1 DI Battery insertion detection input. If OpConfig[BI_PU_EN] = 1 (default), a logic low on the pin is detected as battery insertion. For a removable pack, the BIN pin can be connected to VSS through a pulldown resistor on the pack, typically the 10-kΩ thermistor; the system board should use a 1.8-MΩ pullup resistor to VDD to verify the BIN pin is high when a battery is removed. If the battery is embedded in the system, leave [BI_PU_EN] = 1 and use a 10-kΩ pulldown resistor from BIN to VSS. If [BI_PU_EN] = 0, then the host must inform the gauge of battery insertion and removal with the BAT_INSERT and BAT_REMOVE subcommands.
A 10-kΩ pulldown resistor should be placed between BIN and VSS, even if this pin is unused.
NOTE: The BIN pin must not be shorted directly to VCC or VSS and any pullup resistor on the BIN pin must be connected only to VDD and not an external voltage rail. If an external thermistor is used for temperature input, the thermistor should be connected between this pin and VSS.
GPOUT A1 DO This open-drain output can be configured to indicate BAT_LOW when the OpConfig[BATLOWEN] bit is set. By default [BATLOWEN] is cleared and this pin performs an interrupt function (SOC_INT) by pulsing for specific events, such as a change in state-of-charge. Signal polarity for these functions is controlled by the [GPIOPOL] configuration bit. This pin should not be left floating, even if unused; therefore, a 10-kΩ pullup resistor is recommended. If the device is in SHUTDOWN mode, toggling GPOUT will make the gauge exit SHUTDOWN.
Connect GPOUT to a GPIO of the host MCU so that in case of any inadvertent shutdown condition, the gauge can be commanded to come out of SHUTDOWN.
SCL A3 DIO Peripheral I2C serial bus for communication with system (primary). Open-drain pins. Use with external 10-kΩ pullup resistors (typical) for each pin. If the external pullup resistors are disconnected from these pins during normal operation, use external 1-MΩ pulldown resistors to VSS at each pin to avoid floating inputs.
SDA A2 DIO
SRX C2 AI Integrated high-side sense resistor and coulomb counter input, connected between battery pack and system power rail VSYS.
VDD B3 PO 1.8-V regulator output. Decouple with 2.2-μF ceramic capacitor to VSS. This pin is not intended to provide power for other devices in the system.
VSS B2, C1 PI Ground pin
(1) IO = Digital input-output, AI = Analog input, P = Power connection