JAJSI59C October   2019  – April 2024 CC2652P

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 機能ブロック図
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
    1. 6.1 Pin Diagram—RGZ Package (Top View)
    2. 6.2 Signal Descriptions—RGZ Package
    3. 6.3 Connections for Unused Pins and Modules
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Power Supply and Modules
    5. 7.5  Power Consumption—Power Modes
    6. 7.6  Power Consumption—Radio Modes
    7. 7.7  Nonvolatile (Flash) Memory Characteristics
    8. 7.8  Thermal Resistance Characteristics
    9. 7.9  RF Frequency Bands
    10. 7.10 Bluetooth Low Energy—Receive (RX)
    11. 7.11 Bluetooth Low Energy—Transmit (TX)
    12. 7.12 Zigbee and Thread—IEEE 802.15.4-2006 2.4GHz (OQPSK DSSS1:8, 250kbps): RX
    13. 7.13 Zigbee and Thread—IEEE 802.15.4-2006 2.4GHz (OQPSK DSSS1:8, 250kbps): TX
    14. 7.14 Timing and Switching Characteristics
      1. 7.14.1 Reset Timing
      2. 7.14.2 Wakeup Timing
      3. 7.14.3 Clock Specifications
        1. 7.14.3.1 48MHz Crystal Oscillator (XOSC_HF)
        2. 7.14.3.2 48MHz RC Oscillator (RCOSC_HF)
        3. 7.14.3.3 2MHz RC Oscillator (RCOSC_MF)
        4. 7.14.3.4 32.768kHz Crystal Oscillator (XOSC_LF)
        5. 7.14.3.5 32kHz RC Oscillator (RCOSC_LF)
      4. 7.14.4 Synchronous Serial Interface (SSI) Characteristics
        1. 7.14.4.1 Synchronous Serial Interface (SSI) Characteristics
        2.       36
      5. 7.14.5 UART
        1. 7.14.5.1 UART Characteristics
    15. 7.15 Peripheral Characteristics
      1. 7.15.1 ADC
        1. 7.15.1.1 Analog-to-Digital Converter (ADC) Characteristics
      2. 7.15.2 DAC
        1. 7.15.2.1 Digital-to-Analog Converter (DAC) Characteristics
      3. 7.15.3 Temperature and Battery Monitor
        1. 7.15.3.1 Temperature Sensor
        2. 7.15.3.2 Battery Monitor
      4. 7.15.4 Comparators
        1. 7.15.4.1 Low-Power Clocked Comparator
        2. 7.15.4.2 Continuous Time Comparator
      5. 7.15.5 Current Source
        1. 7.15.5.1 Programmable Current Source
      6. 7.15.6 GPIO
        1. 7.15.6.1 GPIO DC Characteristics
    16. 7.16 Typical Characteristics
      1. 7.16.1 MCU Current
      2. 7.16.2 RX Current
      3. 7.16.3 TX Current
      4. 7.16.4 RX Performance
      5. 7.16.5 TX Performance
      6. 7.16.6 ADC Performance
  9. 8 Detailed Description
    1. 8.1  Overview
    2. 8.2  System CPU
    3. 8.3  Radio (RF Core)
      1. 8.3.1 Bluetooth 5.2 Low Energy
      2. 8.3.2 802.15.4 (Thread, Zigbee, 6LoWPAN)
    4. 8.4  Memory
    5. 8.5  Sensor Controller
    6. 8.6  Cryptography
    7. 8.7  Timers
    8. 8.8  Serial Peripherals and I/O
    9. 8.9  Battery and Temperature Monitor
    10. 8.10 µDMA
    11. 8.11 Debug
    12. 8.12 Power Management
    13. 8.13 Clock Systems
    14. 8.14 Network Processor
  10. 9 Application, Implementation, and Layout
    1. 9.1 Reference Designs
  11. 10Device and Documentation Support
    1. 10.1 Tools and Software
      1. 10.1.1 SimpleLink™ Microcontroller Platform
    2. 10.2 Documentation Support
    3. 10.3 サポート・リソース
    4. 10.4 Trademarks
    5. 10.5 静電気放電に関する注意事項
    6. 10.6 用語集
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Packaging Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • RGZ|48
サーマルパッド・メカニカル・データ
発注情報

7.15.6.1 GPIO DC Characteristics

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
TA = 25°C, VDDS = 1.8V
GPIO VOH at 8 mA loadIOCURR = 2, high-drive GPIOs only1.56V
GPIO VOL at 8 mA loadIOCURR = 2, high-drive GPIOs only0.24V
GPIO VOH at 4 mA loadIOCURR = 11.59V
GPIO VOL at 4 mA loadIOCURR = 10.21V
GPIO pullup currentInput mode, pullup enabled, Vpad = 0V73µA
GPIO pulldown currentInput mode, pulldown enabled, Vpad = VDDS19µA
GPIO low-to-high input transition, with hysteresisIH = 1, transition voltage for input read as 0 → 11.08V
GPIO high-to-low input transition, with hysteresisIH = 1, transition voltage for input read as 1 → 00.73V
GPIO input hysteresisIH = 1, difference between 0 → 1
and 1 → 0 points		0.35V
TA = 25°C, VDDS = 3.0V
GPIO VOH at 8 mA loadIOCURR = 2, high-drive GPIOs only2.59V
GPIO VOL at 8 mA loadIOCURR = 2, high-drive GPIOs only0.42V
GPIO VOH at 4 mA loadIOCURR = 12.63V
GPIO VOL at 4 mA loadIOCURR = 10.40V
TA = 25°C, VDDS = 3.8V
GPIO pullup currentInput mode, pullup enabled, Vpad = 0V282µA
GPIO pulldown currentInput mode, pulldown enabled, Vpad = VDDS110µA
GPIO low-to-high input transition, with hysteresisIH = 1, transition voltage for input read as 0 → 11.97V
GPIO high-to-low input transition, with hysteresisIH = 1, transition voltage for input read as 1 → 01.55V
GPIO input hysteresisIH = 1, difference between 0 → 1
and 1 → 0 points		0.42V
TA = 25°C
VIHLowest GPIO input voltage reliably interpreted as a High0.8*VDDSV
VILHighest GPIO input voltage reliably interpreted as a Low0.2*VDDSV