JAJSI59C October   2019  – April 2024 CC2652P

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 機能ブロック図
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
    1. 6.1 Pin Diagram—RGZ Package (Top View)
    2. 6.2 Signal Descriptions—RGZ Package
    3. 6.3 Connections for Unused Pins and Modules
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Power Supply and Modules
    5. 7.5  Power Consumption—Power Modes
    6. 7.6  Power Consumption—Radio Modes
    7. 7.7  Nonvolatile (Flash) Memory Characteristics
    8. 7.8  Thermal Resistance Characteristics
    9. 7.9  RF Frequency Bands
    10. 7.10 Bluetooth Low Energy—Receive (RX)
    11. 7.11 Bluetooth Low Energy—Transmit (TX)
    12. 7.12 Zigbee and Thread—IEEE 802.15.4-2006 2.4GHz (OQPSK DSSS1:8, 250kbps): RX
    13. 7.13 Zigbee and Thread—IEEE 802.15.4-2006 2.4GHz (OQPSK DSSS1:8, 250kbps): TX
    14. 7.14 Timing and Switching Characteristics
      1. 7.14.1 Reset Timing
      2. 7.14.2 Wakeup Timing
      3. 7.14.3 Clock Specifications
        1. 7.14.3.1 48MHz Crystal Oscillator (XOSC_HF)
        2. 7.14.3.2 48MHz RC Oscillator (RCOSC_HF)
        3. 7.14.3.3 2MHz RC Oscillator (RCOSC_MF)
        4. 7.14.3.4 32.768kHz Crystal Oscillator (XOSC_LF)
        5. 7.14.3.5 32kHz RC Oscillator (RCOSC_LF)
      4. 7.14.4 Synchronous Serial Interface (SSI) Characteristics
        1. 7.14.4.1 Synchronous Serial Interface (SSI) Characteristics
        2.       36
      5. 7.14.5 UART
        1. 7.14.5.1 UART Characteristics
    15. 7.15 Peripheral Characteristics
      1. 7.15.1 ADC
        1. 7.15.1.1 Analog-to-Digital Converter (ADC) Characteristics
      2. 7.15.2 DAC
        1. 7.15.2.1 Digital-to-Analog Converter (DAC) Characteristics
      3. 7.15.3 Temperature and Battery Monitor
        1. 7.15.3.1 Temperature Sensor
        2. 7.15.3.2 Battery Monitor
      4. 7.15.4 Comparators
        1. 7.15.4.1 Low-Power Clocked Comparator
        2. 7.15.4.2 Continuous Time Comparator
      5. 7.15.5 Current Source
        1. 7.15.5.1 Programmable Current Source
      6. 7.15.6 GPIO
        1. 7.15.6.1 GPIO DC Characteristics
    16. 7.16 Typical Characteristics
      1. 7.16.1 MCU Current
      2. 7.16.2 RX Current
      3. 7.16.3 TX Current
      4. 7.16.4 RX Performance
      5. 7.16.5 TX Performance
      6. 7.16.6 ADC Performance
  9. 8 Detailed Description
    1. 8.1  Overview
    2. 8.2  System CPU
    3. 8.3  Radio (RF Core)
      1. 8.3.1 Bluetooth 5.2 Low Energy
      2. 8.3.2 802.15.4 (Thread, Zigbee, 6LoWPAN)
    4. 8.4  Memory
    5. 8.5  Sensor Controller
    6. 8.6  Cryptography
    7. 8.7  Timers
    8. 8.8  Serial Peripherals and I/O
    9. 8.9  Battery and Temperature Monitor
    10. 8.10 µDMA
    11. 8.11 Debug
    12. 8.12 Power Management
    13. 8.13 Clock Systems
    14. 8.14 Network Processor
  10. 9 Application, Implementation, and Layout
    1. 9.1 Reference Designs
  11. 10Device and Documentation Support
    1. 10.1 Tools and Software
      1. 10.1.1 SimpleLink™ Microcontroller Platform
    2. 10.2 Documentation Support
    3. 10.3 サポート・リソース
    4. 10.4 Trademarks
    5. 10.5 静電気放電に関する注意事項
    6. 10.6 用語集
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Packaging Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • RGZ|48
サーマルパッド・メカニカル・データ
発注情報

7.15.2.1 Digital-to-Analog Converter (DAC) Characteristics

Tc = 25°C, VDDS = 3.0V, unless otherwise noted.
PARAMETERTEST CONDITIONSMINTYPMAXUNIT
General Parameters
Resolution8Bits
VDDSSupply voltageAny load, any VREF, precharge OFF, DAC charge-pump ON1.83.8V
External Load(4), any VREF, precharge OFF, DAC charge-pump OFF2.03.8
Any load, VREF = DCOUPL, precharge ON2.63.8
FDACClock frequencyBuffer ON (recommended for external load)16250kHz
Buffer OFF (internal load)161000
Voltage output settling timeVREF = VDDS, buffer OFF, internal load131 / FDAC
VREF = VDDS, buffer ON, external capacitive load = 20pF(3)13.8
External capacitive load20200pF
External resistive load10MΩ
Short circuit current400µA
ZMAXMax output impedance Vref = VDDS, buffer ON, CLK 250kHz (5)VDDS = 3.8V, DAC charge-pump OFF50.8kΩ
VDDS = 3.0V, DAC charge-pump ON51.7
VDDS = 3.0V, DAC charge-pump OFF53.2
VDDS = 2.0V, DAC charge-pump ON48.7
VDDS = 2.0V, DAC charge-pump OFF70.2
VDDS = 1.8V, DAC charge-pump ON46.3
VDDS = 1.8V, DAC charge-pump OFF88.9
Internal Load - Continuous Time Comparator / Low Power Clocked Comparator
DNLDifferential nonlinearityVREF = VDDS,
load = Continuous Time Comparator or Low Power Clocked Comparator
FDAC = 250kHz		±1LSB(1)
Differential nonlinearityVREF = VDDS,
load = Continuous Time Comparator or Low Power Clocked Comparator
FDAC = 16kHz		±1.2
Offset error(2)
Load = Continuous Time Comparator		VREF = VDDS = 3.8V±0.64LSB(1)
VREF = VDDS = 3.0V±0.81
VREF = VDDS = 1.8V±1.27
VREF = DCOUPL, precharge ON±3.43
VREF = DCOUPL, precharge OFF±2.88
VREF = ADCREF±2.37
Offset error(2)
Load = Low Power Clocked Comparator		VREF = VDDS = 3.8V±0.78LSB(1)
VREF = VDDS = 3.0V±0.77
VREF = VDDS = 1.8V±3.46
VREF = DCOUPL, precharge ON±3.44
VREF = DCOUPL, precharge OFF±4.70
VREF = ADCREF±4.11
Max code output voltage variation(2)
Load = Continuous Time Comparator		VREF = VDDS = 3.8V±1.53LSB(1)
VREF = VDDS = 3.0V±1.71
VREF = VDDS = 1.8V±2.10
VREF = DCOUPL, precharge ON±6.00
VREF = DCOUPL, precharge OFF±3.85
VREF = ADCREF±5.84
Max code output voltage variation(2)
Load = Low Power Clocked Comparator		VREF = VDDS = 3.8V±2.92LSB(1)
VREF =VDDS = 3.0V±3.06
VREF = VDDS = 1.8V±3.91
VREF = DCOUPL, precharge ON±7.84
VREF = DCOUPL, precharge OFF±4.06
VREF = ADCREF±6.94
Output voltage range(2)
Load = Continuous Time Comparator		VREF = VDDS = 3.8V, code 10.03V
VREF = VDDS = 3.8V, code 2553.62
VREF = VDDS = 3.0V, code 10.02
VREF = VDDS = 3.0V, code 2552.86
VREF = VDDS = 1.8V, code 10.01
VREF = VDDS = 1.8V, code 2551.71
VREF = DCOUPL, precharge OFF, code 10.01
VREF = DCOUPL, precharge OFF, code 2551.21
VREF = DCOUPL, precharge ON, code 11.27
VREF = DCOUPL, precharge ON, code 2552.46
VREF = ADCREF, code 10.01
VREF = ADCREF, code 2551.41
Output voltage range(2)
Load = Low Power Clocked Comparator		VREF = VDDS = 3.8V, code 10.03V
VREF = VDDS = 3.8V, code 2553.61
VREF = VDDS = 3.0V, code 10.02
VREF = VDDS = 3.0V, code 2552.85
VREF = VDDS = 1.8V, code 10.01
VREF = VDDS = 1.8V, code 2551.71
VREF = DCOUPL, precharge OFF, code 10.01
VREF = DCOUPL, precharge OFF, code 2551.21
VREF = DCOUPL, precharge ON, code 11.27
VREF = DCOUPL, precharge ON, code 2552.46
VREF = ADCREF, code 10.01
VREF = ADCREF, code 2551.41
External Load (Keysight 34401A Multimeter)
INLIntegral nonlinearityVREF = VDDS, FDAC = 250kHz ±1LSB(1)
VREF = DCOUPL, FDAC = 250kHz ±1
VREF = ADCREF, FDAC = 250kHz ±1
DNLDifferential nonlinearityVREF = VDDS, FDAC = 250kHz ±1LSB(1)
DAC Offset errorVREF = VDDS = 3.8V±0.40LSB(1)
VREF = VDDS = 3.0V±0.50
VREF = VDDS = 1.8V±0.75
VREF = DCOUPL, precharge ON±1.55
VREF = DCOUPL, precharge OFF±1.30
VREF = ADCREF±1.10
DAC Max code output voltage variationVREF = VDDS = 3.8V±1.00LSB(1)
VREF = VDDS = 3.0V±1.00
VREF = VDDS = 1.8V±1.00
VREF = DCOUPL, precharge ON±3.45
VREF = DCOUPL, precharge OFF±2.10
VREF = ADCREF±1.90
Output voltage range
Load = Low Power Clocked Comparator		VREF = VDDS = 3.8V, code 10.03V
VREF = VDDS = 3.8V, code 2553.61
VREF = VDDS = 3.0V, code 10.02
VREF = VDDS = 3.0V, code 2552.85
VREF = VDDS = 1.8V, code 10.02
VREF = VDDS = 1.8V, code 2551.71
VREF = DCOUPL, precharge OFF, code 10.02
VREF = DCOUPL, precharge OFF, code 2551.20
VREF = DCOUPL, precharge ON, code 11.27
VREF = DCOUPL, precharge ON, code 2552.46
VREF = ADCREF, code 10.02
VREF = ADCREF, code 2551.42
(1) 1 LSB (VREF 3.8V/3.0V/1.8V/DCOUPL/ADCREF) = 14.10mV/11.13mV/6.68mV/4.67mV/5.48mV
(2) Includes comparator offset
(3) A load > 20pF will increase the settling time
(4) Keysight 34401A Multimeter
(5) When using lower levels of VDDS with the charge pump OFF, care must be taken to adapt the surrounding circuit to the increase in impedance.