JAJSNG1A May   2021  – November 2021 CC2652P7

PRODUCTION DATA  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1. 3.1 機能ブロック図
  4. 4 Revision History
  5. 5 Device Comparison
  6. 6 Terminal Configuration and Functions
    1. 6.1 Pin Diagram – RGZ Package (Top View)
    2. 6.2 Signal Descriptions – RGZ Package
    3. 6.3 Connections for Unused Pins and Modules
  7. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Power Supply and Modules
    5. 7.5  Power Consumption - Power Modes
    6. 7.6  Power Consumption - Radio Modes
    7. 7.7  Nonvolatile (Flash) Memory Characteristics
    8. 7.8  Thermal Resistance Characteristics
    9. 7.9  RF Frequency Bands
    10. 7.10 Bluetooth Low Energy - Receive (RX)
    11. 7.11 Bluetooth Low Energy - Transmit (TX)
    12. 7.12 Zigbee and Thread - IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps) - RX
    13. 7.13 Zigbee and Thread - IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps) - TX
    14. 7.14 Timing and Switching Characteristics
      1. 7.14.1 Reset Timing
      2. 7.14.2 Wakeup Timing
      3. 7.14.3 Clock Specifications
        1. 7.14.3.1 48 MHz Crystal Oscillator (XOSC_HF)
        2. 7.14.3.2 48 MHz RC Oscillator (RCOSC_HF)
        3. 7.14.3.3 2 MHz RC Oscillator (RCOSC_MF)
        4. 7.14.3.4 32.768 kHz Crystal Oscillator (XOSC_LF)
        5. 7.14.3.5 32 kHz RC Oscillator (RCOSC_LF)
      4. 7.14.4 Synchronous Serial Interface (SSI) Characteristics
        1. 7.14.4.1 Synchronous Serial Interface (SSI) Characteristics
        2.       36
      5. 7.14.5 UART
        1. 7.14.5.1 UART Characteristics
    15. 7.15 Peripheral Characteristics
      1. 7.15.1 ADC
        1. 7.15.1.1 Analog-to-Digital Converter (ADC) Characteristics
      2. 7.15.2 DAC
        1. 7.15.2.1 Digital-to-Analog Converter (DAC) Characteristics
      3. 7.15.3 Temperature and Battery Monitor
        1. 7.15.3.1 Temperature Sensor
        2. 7.15.3.2 Battery Monitor
      4. 7.15.4 Comparators
        1. 7.15.4.1 Low-Power Clocked Comparator
        2. 7.15.4.2 Continuous Time Comparator
      5. 7.15.5 Current Source
        1. 7.15.5.1 Programmable Current Source
      6. 7.15.6 GPIO
        1. 7.15.6.1 GPIO DC Characteristics
    16. 7.16 Typical Characteristics
      1. 7.16.1 MCU Current
      2. 7.16.2 RX Current
      3. 7.16.3 TX Current
      4. 7.16.4 RX Performance
      5. 7.16.5 TX Performance
      6. 7.16.6 ADC Performance
  8. 8 Detailed Description
    1. 8.1  Overview
    2. 8.2  System CPU
    3. 8.3  Radio (RF Core)
      1. 8.3.1 Bluetooth 5.2 Low Energy
      2. 8.3.2 802.15.4 (Thread, Zigbee, 6LoWPAN)
    4. 8.4  Memory
    5. 8.5  Sensor Controller
    6. 8.6  Cryptography
    7. 8.7  Timers
    8. 8.8  Serial Peripherals and I/O
    9. 8.9  Battery and Temperature Monitor
    10. 8.10 µDMA
    11. 8.11 Debug
    12. 8.12 Power Management
    13. 8.13 Clock Systems
    14. 8.14 Network Processor
  9. 9 Application, Implementation, and Layout
    1. 9.1 Reference Designs
    2. 9.2 Junction Temperature Calculation
  10. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
    2. 10.2 Tools and Software
      1. 10.2.1 SimpleLink™ Microcontroller Platform
    3. 10.3 Documentation Support
    4. 10.4 サポート・リソース
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 Glossary
  11. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

7.15.6.1 GPIO DC Characteristics

Measurements CBSed to PG2.1: 
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
TA = 25 °C, VDDS = 1.8 V
GPIO VOH at 8 mA load IOCURR = 2, high-drive GPIOs only 1.56 V
GPIO VOL at 8 mA load IOCURR = 2, high-drive GPIOs only 0.24 V
GPIO VOH at 4 mA load IOCURR = 1 1.59 V
GPIO VOL at 4 mA load IOCURR = 1 0.21 V
GPIO pullup current Input mode, pullup enabled, Vpad = 0 V 73 µA
GPIO pulldown current Input mode, pulldown enabled, Vpad = VDDS 19 µA
GPIO low-to-high input transition, with hysteresis IH = 1, transition voltage for input read as 0 → 1 1.08 V
GPIO high-to-low input transition, with hysteresis IH = 1, transition voltage for input read as 1 → 0 0.73 V
GPIO input hysteresis IH = 1, difference between 0 → 1
and 1 → 0 points		 0.35 V
TA = 25 °C, VDDS = 3.0 V
GPIO VOH at 8 mA load IOCURR = 2, high-drive GPIOs only 2.59 V
GPIO VOL at 8 mA load IOCURR = 2, high-drive GPIOs only 0.42 V
GPIO VOH at 4 mA load IOCURR = 1 2.63 V
GPIO VOL at 4 mA load IOCURR = 1 0.40 V
TA = 25 °C, VDDS = 3.8 V
GPIO pullup current Input mode, pullup enabled, Vpad = 0 V 282 µA
GPIO pulldown current Input mode, pulldown enabled, Vpad = VDDS 110 µA
GPIO low-to-high input transition, with hysteresis IH = 1, transition voltage for input read as 0 → 1 1.97 V
GPIO high-to-low input transition, with hysteresis IH = 1, transition voltage for input read as 1 → 0 1.55 V
GPIO input hysteresis IH = 1, difference between 0 → 1
and 1 → 0 points		 0.42 V
TA = 25 °C
VIH Lowest GPIO input voltage reliably interpreted as a High 0.8*VDDS V
VIL Highest GPIO input voltage reliably interpreted as a Low 0.2*VDDS V