4 Revision History
Changes from D Revision (September 2014) to E Revision
-
Added Support for 105ºC thermal pad temperature Go
-
Deleted Device Comparison table; information in POA Go
-
Changed order of pin descriptions to alphabetical Go
-
Changed Handing Ratings to ESD Ratings; moved TJ and storage temperature to Absolute Maximum RatingsGo
-
Added PCB temperature in Recommended Operating Conditions Go
-
Added VOH specification for TPCB≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 2.375 V to 2.625 V Go
-
Added VOL specification for TPCB≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 2.375 V to 2.625 V Go
-
Added IEE specification for TPCB ≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 2.375 V to 2.625 V Go
-
Added ICC specification for TPCB ≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 2.375 V to 2.625 V Go
-
Added VOH specification for TPCB≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 3 V to 3.6 V Go
-
Added VOL specification for TPCB≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 3 V to 3.6 V Go
-
Added IEE specification for TPCB ≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 3 V to 3.6 V Go
-
Added ICC specification for TPCB ≤ 105ºC in Electrical Characteristics: LVPECL Output, at VCC = 3 V to 3.6 V Go
-
Added Thermal Considerations section Go
Changes from C Revision (June 2014) to D Revision
-
Added "NOTE" at the beginning of "Applications and Implementation" section.Go
-
Changed JEDEC symbol to RθJAGo
Changes from B Revision (August 2011) to C Revision
-
Added data sheet flow and layout to conform with new TI standards. Added the following sections: Application and Implementation; Power Supply Recommendations; Layout; Device and Documentation Support; Mechanical, Packaging, and Ordering Information.Go
-
Added fIN = 125 MHz, 312.5 MHz for VOUT, DIFF, PPGo
-
Added Typical values, Max values, and footnotes for 122.88 MHz, 156.25 MHz, and 312.5 MHz test conditions corresponding to Random Additive Jitter for Electrical Characteristics: LVPECL Output, at VCC = 2.375 V to 2.625 V Go
-
Added Typical values, Max values, and footnotes for 122.88 MHz, 156.25 MHz, and 312.5 MHz test conditions corresponding to Random Additive Jitter for Electrical Characteristics: LVPECL Output, at VCC = 3.0 V to 3.6 VGo
Changes from A Revision (May 2010) to B Revision
-
Revised description of pin 7Go
-
Corrected VIL parameter description in Electrical Characteristics table for LVCMOS inputGo
-
Added (2)footnote (2) to Electrical Characteristics table for LVPECL Output, VCC = 2.375 V to 2.625 VGo
-
Changed recommended resistor values in Figure 12(a)Go
-
Changed recommended resistor values in Figure 16Go
Changes from * Revision (October, 2009) to A Revision
-
Changed description of INN1, INN0 and INP1, INP0 pins in tableGo
-
Changed descriptions of all output pins in tableGo