• Menu
  • Product
  • Email
  • PDF
  • Order now

  • DAC121S101QML-SP Radiation Hardened 12-Bit Micro Power Digital-to-Analog Converter With Rail-to-Rail Output

    • SNAS410F May   2008  – July 2016 DAC121S101QML-SP

      PRODUCTION DATA.  

  • CONTENTS
  • SEARCH
  • DAC121S101QML-SP Radiation Hardened 12-Bit Micro Power Digital-to-Analog Converter With Rail-to-Rail Output
  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 DAC121S101QML-SP Electrical Characteristics DC Parameters
    6. 6.6 DAC121S101QML-SP Electrical Characteristics AC and Timing Characteristics
    7. 6.7 DAC121S101QML Electrical Characteristics Radiation Electrical Characteristics
    8. 6.8 DAC121S101QML-SP Electrical Characteristics Operating Life Test Delta Parameters TA at 25°C
    9. 6.9 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 DAC Section
      2. 7.3.2 Resistor String
      3. 7.3.3 Output Amplifier
      4. 7.3.4 Power-On Reset
    4. 7.4 Device Functional Modes
      1. 7.4.1 Power-Down Modes
    5. 7.5 Programming
      1. 7.5.1 Serial Interface
      2. 7.5.2 Input Shift Register
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Bipolar Operation
      2. 8.1.2 DSP and Microprocessor Interfacing
        1. 8.1.2.1 ADSP-2101/ADSP2103 Interfacing
        2. 8.1.2.2 80C51/80L51 Interface
        3. 8.1.2.3 68HC11 Interface
        4. 8.1.2.4 Microwire Interface
      3. 8.1.3 Radiation Environments
        1. 8.1.3.1 Total Ionizing Dose
          1. 8.1.3.1.1 DAC121S101WGRQV 5962R0722601VZA
          2. 8.1.3.1.2 DAC121S101WGRLV 5962R0722602VZA
        2. 8.1.3.2 Single Event Latch-Up and Functional Interrupt
        3. 8.1.3.3 Single Event Upset
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
  9. 9 Power Supply Recommendations
    1. 9.1 Using References as Power Supplies
      1. 9.1.1 LM4050QML-SP
      2. 9.1.2 LP3985
      3. 9.1.3 LP2980-N
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
      2. 11.1.2 Device Nomenclature
        1. 11.1.2.1 Specification Definitions
    2. 11.2 Documentation Support
      1. 11.2.1 Related Documentation
    3. 11.3 Receiving Notification of Documentation Updates
    4. 11.4 Community Resources
    5. 11.5 Trademarks
    6. 11.6 Electrostatic Discharge Caution
    7. 11.7 Glossary
  12. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Engineering Samples
  13. IMPORTANT NOTICE

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
  • NAC|10
    • MCLG023C
  • Y|0
サーマルパッド・メカニカル・データ
発注情報
  • snas410f_oa
  • snas410f_pm
search No matches found.
  • Full reading width
    • Full reading width
    • Comfortable reading width
    • Expanded reading width
  • Card for each section
  • Card with all content

 

DATA SHEET

DAC121S101QML-SP Radiation Hardened 12-Bit Micro Power Digital-to-Analog Converter With Rail-to-Rail Output

1 Features

  • 5962R07726
    • Total Ionizing Dose 100 krad(Si)
    • Single Event Latch-up Immune
      120 MeV-cm2/mg
    • Single Event Functional Interrupt Immune
      120 MeV-cm2/mg (See Radiation Report)
  • Ensured Monotonicity
  • Low Power Operation
  • Rail-to-Rail Voltage Output
  • Power-On Reset to Zero Volts Output
  • SYNC Interrupt Facility
  • Wide Power Supply Range (2.7 V to 5.5 V)
  • Small Packages
  • Power-Down Feature
  • Key Specifications
    • Resolution: 12 Bits
    • DNL: +0.21, –0.10 LSB (Typical)
    • Output Settling Time: 12.5 µs (Typical)
    • Zero Code Error: 2.1 mV (Typical)
    • Full-Scale Error: −0.04% FS (Typical)
    • Power Dissipation
      • Normal Mode: 0.52 mW (3.6 V) and 1.19 mW (5.5 V) Typical
      • Power-Down Mode: 0.014 µW (3.6 V) and 0.033 µW (5.5 V) Typical

2 Applications

  • Satellites
    • Altitude and Orbit Control
    • Precision Sensors
    • Motor Control
  • High Temperatures

3 Description

The DAC121S101QML-SP device is a full-featured, general-purpose, 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes just
177 µA of current at 3.6 V. The on-chip output amplifier allows rail-to-rail output swing and the three-wire serial interface operates at clock rates up to
20 MHz over the specified supply voltage range and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.

The supply voltage for the DAC121S101QML-SP serves as its voltage reference, providing the widest possible output dynamic range. A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt.

The low power consumption and small packages of the DAC121S101QML-SP make it an excellent choice for use in battery-operated equipment.

Device Information(1)

PART NUMBER GRADE PACKAGE
DAC121S101WGRQV 5962R0722601VZA 100 krad 10-lead ceramic SOIC
DAC121S101WGRLV 5962R0722602VZA 100 krad ELDRS-Free 10-lead ceramic SOIC
DAC121S101-MDR 5962R0722601V9A 100 krad Die
DAC121S101WGMPR Pre-Flight Engineering Prototype 10-lead ceramic SOIC
DAC121S101CVAL Ceramic Evaluation Board 10-lead ceramic SOIC
  1. For all available packages, see the orderable addendum at the end of the data sheet.

Functional Block Diagram

DAC121S101QML-SP 30018003.gif

4 Revision History

Changes from E Revision (March 2013) to F Revision

  • Changed data sheet title DAC121S101QML 12-Bit Micro Power Digital-to-Analog Converter With Rail-to-Rail Output to DAC121S101QML-SP Radiation Hardened 12-Bit Micro Power Digital-to-Analog Converter With Rail-to-Rail OutputGo
  • Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section.Go

Changes from D Revision (March 2013) to E Revision

  • Changed layout of National Data Sheet to TI formatGo

5 Pin Configuration and Functions

NAC Package
10-Pin CFP
Top View
DAC121S101QML-SP 30018001.gif

Pin Functions

PIN I/O DESCRIPTION
NO. NAME
1 VA — Power supply and reference input; must be decoupled to GND
2 N/C — No connect; pin not internally connected to die
3 N/C — No connect; pin not internally connected to die
4 VOUT Output DAC analog output voltage
5 N/C — No connect; pin not internally connected to die
6 N/C — No connect; pin not internally connected to die
7 SYNC Input Frame synchronization input for the data input. When this pin goes low, it enables the input shift register and data is transferred on the falling edges of SCLK. The DAC is updated on the 16th clock cycle unless SYNC is brought high before the 16th clock, in which case the rising edge of SYNC acts as an interrupt and the write sequence is ignored by the DAC.
8 SCLK Input Serial clock input; data is clocked into the input shift register on the falling edges of this pin.
9 DIN Input Serial data input; data is clocked into the 16-bit shift register on the falling edges of SCLK after the fall of SYNC.
10 GND — Ground reference for all on-chip circuitry

6 Specifications

6.1 Absolute Maximum Ratings(1)(2)

MIN MAX UNIT
Supply voltage, VA 6.5 V
Voltage on any input pin −0.3 (VA + 0.3) V
Input current at any pin(3) 10 mA
Maximum output current(4) 10 mA
VOUT pin in power-down mode 1 mA
Package input current(3) 20 mA
Power dissipation at TA = 25°C See(5)
Maximum junction temperature 175 °C
Lead temperature CFP package
(Soldering 10 Seconds)		 260 °C
Package weight (typical) CFP package 220 mg
Storage temperature, Tstg −65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are measured with respect to GND = 0 V, unless otherwise specified.
(3) When the input voltage at any pin exceeds the power supplies (that is, less than GND, or greater than VA), the current at that pin should be limited to 10 mA. The 20 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an input current of 10 mA to two.
(4) Maximum output current may not exceed 10 mA. At VDD = 5.5 V the minimum external resistive load can be no less than 550 Ω
(360 Ω at VDD = 3.6 V).
(5) The absolute maximum junction temperature (TJmax) for this device is 175°C. The maximum allowable power dissipation is dictated by TJmax, the junction-to-ambient thermal resistance (RθJA), and the ambient temperature (TA), and can be calculated using the formula PDMAX = (TJmax − TA) / RθJA. The values for maximum power dissipation will be reached only when the device is operated in a severe fault condition (for example, when input or output pins are driven beyond the power supply voltages, or the power supply polarity is reversed). Obviously, such conditions must be avoided.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)(2) ±5000 V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) Human body model is 100-pF capacitor discharged through a 1.5-kΩ resistor. Machine model is 220 pF discharged through 0 Ω.

6.3 Recommended Operating Conditions

MIN MAX UNIT
Operating temperature −55 125 °C
Supply voltage, VA 2.7 5.5 V
Any input voltage(1) −0.1 (VA + 0.1) V
Output load 0 1500 pF
SCLK frequency 20 MHz
(1) The analog inputs are protected as shown below. Input voltage magnitudes up to VA + 300 mV or to 300 mV below GND will not damage this device. However, errors in the conversion result can occur if any input goes above VA or below GND by more than 100 mV. For example, if VA is 2.7-V DC , ensure that –100 mV ≤ input voltages ≤ 2.8-V DC to ensure accurate conversions.
DAC121S101QML-SP 30018004.gif

6.4 Thermal Information

THERMAL METRIC(1)(2) DAC121S101QML-SP UNIT
NAC (CFP)
10 PINS
RθJA Junction-to-ambient thermal resistance 214 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance 25.7 °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.
(2) 10-pin CFP Package on 2-layer, 1-oz. PCB

6.5 DAC121S101QML-SP Electrical Characteristics DC Parameters

The following specifications apply for VA = 2.7 V to 5.5 V, RL = ∞, CL = 200 pF to GND, fSCLK = 20 MHz, input code range 48 to 4047. All limits TA = 25°C, unless otherwise specified.
PARAMETER TEST CONDITIONS NOTES SUB-GROUPS MIN TYP(1) MAX UNIT
STATIC PERFORMANCE
Resolution TMIN ≤ TA ≤ TMAX See(2) 12 Bits
Monotonicity TMIN ≤ TA ≤ TMAX See(2) 12 Bits
INL Integral non-linearity Over Decimal codes 48 to 4047 [1, 2, 3] −8 ±2.75 8 LSB
DNL Differential non-linearity VA = 2.7 V to 5.5 V DNL MAX [1, 2, 3] 0.21 1 LSB
DNL MIN −0.7 −0.1
ZE Zero code error IOUT = 0 [1, 2, 3] 2.12 15 mV
FSE Full-scale error IOUT = 0 [1, 2, 3] −0.04 −1 %FSR
GE Gain error All ones Loaded to DAC register [1, 2, 3] −0.11 ±1 %FSR
ZCED Zero code error drift See(2) −20 µV/°C
TC GE Gain error tempco VA = 3 V See(2) −0.7 ppm/°C
VA = 5 V −1
OUTPUT CHARACTERISTICS
IPD SINK Vout pin in power-down mode All PD Modes, TMIN ≤ TA ≤ TMAX See(2) 1 mA
Output voltage range TMIN ≤ TA ≤ TMAX See(2) 0 VA V
ZCO Zero code output VA = 3 V, IOUT = 10 µA [1, 2, 3] 2 6 mV
VA = 3 V, IOUT = 100 µA [1, 2, 3] 4 10
VA = 5 V, IOUT = 10 µA [1, 2, 3] 2 8
VA = 5 V, IOUT = 100 µA [1, 2, 3] 4 9
FSO Full-scale output VA = 3 V, IOUT = 10 µA [1, 2, 3] 2.99 2.997 V
VA = 3 V, IOUT = 100 µA [1, 2, 3] 2.985 2.991
VA = 5 V, IOUT = 10 µA [1, 2, 3] 4.985 4.994
VA = 5 V, IOUT = 100 µA [1, 2, 3] 4.985 4.992
Maximum load capacitance RL = ∞ See(2) 1500 pF
RL = 2 kΩ 1500
DC output impedance [1, 2, 3] 8 16 Ω
LOGIC INPUT
IIN Input current [1, 2, 3] −200 6 200 nA
VIL Input low voltage VA = 5 V, TMIN ≤ TA ≤ TMAX [1, 2, 3] 0.8 V
VA = 3 V, TMIN ≤ TA ≤ TMAX [1, 2, 3] 0.5
VIH Input high voltage VA = 5 V, TMIN ≤ TA ≤ TMAX [1, 2, 3] 2.4 V
VA = 3 V, TMIN ≤ TA ≤ TMAX [1, 2, 3] 2.1
CIN Input capacitance See(2) 5 pF
POWER REQUIREMENTS
IA Supply current (output unloaded) Normal Mode 5.5 V
fSCLK = 20 MHz		 [1, 2, 3] 216 270 µA
Normal Mode 3.6 V
fSCLK = 20 MHz		 [1, 2, 3] 145 200
Normal Mode 5.5 V
fSCLK = 10 MHz		 [1, 2, 3] 185 230
Normal Mode 3.6 V
fSCLK = 10 MHz		 [1, 2, 3] 132 175
Normal Mode 5.5 V
fSCLK = 0		 [1, 2, 3] 150 190
Normal Mode 3.6 V
fSCLK = 0		 [1, 2, 3] 115 160
All PD Modes, 5.5 V
fSCLK = 20 MHz		 [1, 2, 3] 22 60
All PD Modes, 3.6 V
fSCLK = 20 MHz		 [1, 2, 3] 12 30
All PD Modes, 5.5 V
fSCLK = 10 MHz		 [1, 2, 3] 12 40
All PD Modes, 3.6 V
fSCLK = 10 MHz		 [1, 2, 3] 6 20
All PD Modes, 5.5 V
fSCLK = 0 		[1, 2, 3] 0.006 1
All PD Modes, 3.6 V
fSCLK = 0 		[1, 2, 3] 0.004 1
PC Power consumption (output unloaded) Normal Mode, 5.5 V
fSCLK = 20 MHz		 [1, 2, 3] 1.19 1.49 mW
Normal Mode 3.6 V
fSCLK = 20 MHz		 [1, 2, 3] 0.52 0.72
Normal Mode, 5.5 V
fSCLK = 10 MHz		 [1, 2, 3] 1.02 1.27
Normal Mode 3.6 V
fSCLK = 10 MHz		 [1, 2, 3] 0.47 0.63
Normal Mode, 5.5 V
fSCLK = 0		 [1, 2, 3] 0.82 1.05
Normal Mode 3.6 V
fSCLK = 0		 [1, 2, 3] 0.41 0.58
All PD Modes, 5.5 V
fSCLK = 20 MHz		 [1, 2, 3] 0.12 0.33
All PD Modes, 3.6 V
fSCLK = 20 MHz		 [1, 2, 3] 0.07 0.11
All PD Modes, 5.5 V
fSCLK = 10 MHz		 [1, 2, 3] 0.04 0.22
All PD Modes, 3.6 V
fSCLK = 10 MHz		 [1, 2, 3] 0.02 0.08
All PD Modes, 5.5 V
fSCLK = 0 		[1, 2, 3] 0.033 5.5
All PD Modes, 3.6 V
fSCLK = 0 		[1, 2, 3] 0.014 3.6
IOUT Power efficiency ILOAD = 2 mA See(2) 91%
IA 94%
(1) Typical figures are at TJ = 25°C, and represent most likely parametric norms.
(2) This parameter is ensured by design and/or characterization and is not tested in production.

6.6 DAC121S101QML-SP Electrical Characteristics AC and Timing Characteristics

The following specifications apply for VA = 2.7 V to 5.5 V, RL = ∞, CL = 200 pF to GND, fSCLK = 20 MHz, input code range 48 to 4047. All limits TA = 25°C, unless otherwise specified.
PARAMETER TEST CONDITIONS NOTES SUB-GROUPS MIN TYP(1) MAX UNIT
fSCLK SCLK frequency (See Figure 31) [9,10,11] 20 MHz
ts Output voltage settling time
 FF0 to 00F code change, RL = ∞ CL ≤ 200 pF [9,10,11] 12.5 15 µs
CL = 500 pF [9,10,11] 12.5 15
00Fh to FF0h code change, RL = ∞ CL ≤ 200 pF [9,10,11] 12.5 15
CL = 500 pF [9,10,11] 12.5 15
SR Output slew rate See(2) 1 V/µs
Glitch impulse Code change from 800h to 7FFh See(2) 12 nV-sec
Digital feedthrough See(2) 0.5 nV-sec
tWU Wake-Up Time VA = 5 V See(2) 0.65 µs
VA = 3 V 1.1
1/fSCLK SCLK cycle time (See Figure 31) [9,10,11] 50 ns
tH SCLK high time (See Figure 31) [9,10,11] 20 ns
tL SCLK low time (See Figure 31) [9,10,11] 20 ns
tSUCL Setup time SYNC to SCLK rising edge (See Figure 31) [9,10,11] 0 ns
tSUD Data setup time (See Figure 31) [9,10,11] 6 ns
tDHD Data hold time (See Figure 31) [9,10,11] 4.5 ns
tCS SCLK fall to rise of SYNC VA = 5.5 V (See Figure 31) [9,10,11] 10 ns
VA = 2.7 V (See Figure 31) [9,10,11] 18
tSYNC SYNC high time VA = 5.5 V (See Figure 31) [9,10,11] 37 ns
VA = 2.7 V (See Figure 31) [9,10,11] 36
(1) Typical figures are at TJ = 25°C, and represent most likely parametric norms.
(2) This parameter is ensured by design and/or characterization and is not tested in production.

6.7 DAC121S101QML Electrical Characteristics Radiation Electrical Characteristics(1)

The following specifications apply for VA = 2.7 V to 5.5 V, RL = ∞, CL = 200 pF to GND, fSCLK = 20 MHz, input code range 48 to 4047.
PARAMETER TEST CONDITIONS SUB-GROUPS MIN MAX UNIT
POWER REQUIREMENTS
IA Supply current (output unloaded) Normal Mode
fSCLK = 20 MHz		 5.5 V [1] 325 µA
3.6 V [1] 250
Normal Mode
fSCLK = 10 MHz		 5.5 V [1] 300
3.6 V [1] 225
Normal Mode
fSCLK = 0		 5.5 V [1] 275
3.6 V [1] 200
All PD Modes,
fSCLK = 20 MHz		 5.5 V [1] 125
3.6 V [1] 100
All PD Modes,
fSCLK = 10 MHz		 5.5 V [1] 115
3.6 V [1] 95
All PD Modes,
fSCLK = 0		 5.5 V [1] 100
3.6 V [1] 100
(1) Pre- and post-irradiation limits are identical to those listed in the DAC121S101QML-SP Electrical Characteristics DC Parameters and DAC121S101QML-SP Electrical Characteristics AC and Timing Characteristics tables, except as listed in the Radiation Electrical Characteristics table. When performing post irradiation electrical measurements for any RHA level, TA = 25°C. See Radiation Environments for dose rate and test conditions.

6.8 DAC121S101QML-SP Electrical Characteristics Operating Life Test Delta Parameters
TA at 25°C(1)

PARAMETER TEST CONDITIONS SUB-GROUPS MIN MAX UNIT
INL Integral non-linearity [1] ±2 LBS
ts Output voltage settling time [1] ±5 µA
IA Supply current (output unloaded) Normal Mode, VA = 5.5 V, fSCLK = 20 MHz [1] ±10 µA
Normal Mode, VA = 3.6 V, fSCLK = 20 MHz [1] ±6
Normal Mode, VA = 5.5 V, fSCLK = 10 MHz [1] ±10
Normal Mode, VA = 3.6 V, fSCLK = 10 MHz [1] ±6
Normal Mode, VA = 5.5 V, fSCLK = 0 [1] ±8
Normal Mode, VA = 3.6 V, fSCLK = 0 [1] ±6
All PD Modes, VA = 5.5 V, fSCLK = 20 MHz [1] ±2
All PD Modes, VA = 3.6 V, fSCLK = 20 MHz [1] ±1
All PD Modes, VA = 5.5 V, fSCLK = 10 MHz [1] ±1
All PD Modes, VA = 3.6 V, fSCLK = 10 MHz [1] ±1
All PD Modes, VA = 5.5 V, fSCLK = 0 [1] ±0.1
All PD Modes, VA = 3.6 V, fSCLK = 0 [1] ±0.1
(1) These parameters are worse case drift. Deltas are performed at room temperature Post OP Life. All other parameters no Deltas are required.

The DAC121S101QML-SP operates over the extended temperature range of –55°C to +125°C.

See Radiation Environments for dose rate environment information.

Table 1. Quality Conformance Inspection(1)

SUB-GROUP DESCRIPTION TEMP (°C)
1 Static tests at +25
2 Static tests at +125
3 Static tests at –55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at –55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at –55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at –55
12 Setting time at +25
13 Setting time at +125
14 Setting time at –55
(1) MIL-STD-883, Method 5005 - Group A
DAC121S101QML-SP 30018005.gif Figure 1. Input / Output Transfer Characteristic

6.9 Typical Characteristics

fSCLK = 20 MHz, TA = 25°C, Input Code Range 48 to 4047, unless otherwise stated
DAC121S101QML-SP 30018052.png Figure 2. DNL at VA = 2.7 V
DAC121S101QML-SP 30018054.png Figure 4. INL at VA = 2.7 V
DAC121S101QML-SP 30018022.png Figure 6. DNL vs VA
DAC121S101QML-SP 30018050.png Figure 8. 2.7-V DNL vs fSCLK
DAC121S101QML-SP 30018056.png Figure 10. 2.7-V DNL vs Clock Duty Cycle
DAC121S101QML-SP 30018026.png Figure 12. 2.7-V DNL vs Temperature
DAC121S101QML-SP 30018028.png Figure 14. 2.7-V INL vs fSCLK
DAC121S101QML-SP 30018030.png Figure 16. 2.7-V INL vs Clock Duty Cycle
DAC121S101QML-SP 30018032.png Figure 18. 2.7-V INL vs Temperature
DAC121S101QML-SP 30018034.png Figure 20. Zero Code Error vs fSCLK
DAC121S101QML-SP 30018037.png Figure 22. Full-Scale Error vs fSCLK
DAC121S101QML-SP 30018044.png Figure 24. Supply Current vs VA
DAC121S101QML-SP 30018046.png Figure 26. 5-V Glitch Response
DAC121S101QML-SP 30018048.png Figure 28. 3-V Wake-Up Time
DAC121S101QML-SP 30018053.png Figure 3. DNL at VA = 5.5 V
DAC121S101QML-SP 30018055.png Figure 5. INL at VA = 5.5 V
DAC121S101QML-SP 30018023.png Figure 7. INL vs VA
DAC121S101QML-SP 30018051.png Figure 9. 5.5-V DNL vs fSCLK
DAC121S101QML-SP 30018057.png Figure 11. 5.5-V DNL vs Clock Duty Cycle
DAC121S101QML-SP 30018027.png Figure 13. 5.5-V DNL vs Temperature
DAC121S101QML-SP 30018029.png Figure 15. 5.5-V INL vs fSCLK
DAC121S101QML-SP 30018031.png Figure 17. 5.5-V INL vs Clock Duty Cycle
DAC121S101QML-SP 30018033.png Figure 19. 5.5-V INL vs Temperature
DAC121S101QML-SP 30018036.png Figure 21. Zero Code Error vs Temperature
DAC121S101QML-SP 30018039.png Figure 23. Full-Scale Error vs Temperature
DAC121S101QML-SP 30018045.png Figure 25. Supply Current vs Temperature
DAC121S101QML-SP 30018047.png Figure 27. Power-On Reset
DAC121S101QML-SP 30018049.png Figure 29. 5-V Wake-Up Time

 
Texas Instruments

© Copyright 1995-2025 Texas Instruments Incorporated. All rights reserved.
Submit documentation feedback | IMPORTANT NOTICE | Trademarks | Privacy policy | Cookie policy | Terms of use | Terms of sale