JAJSTJ2 June   2024 DRV2911-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings Auto
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Output Stage
      2. 6.3.2 Hardware Interface
      3. 6.3.3 AVDD Linear Voltage Regulator
      4. 6.3.4 Step-Down Mixed-Mode Buck Regulator
        1. 6.3.4.1 Buck in Inductor Mode
        2. 6.3.4.2 Buck in Resistor mode
        3. 6.3.4.3 Buck Regulator with External LDO
        4. 6.3.4.4 AVDD Power Sequencing with Buck Regulator
        5. 6.3.4.5 Mixed mode Buck Operation and Control
        6. 6.3.4.6 Buck Undervoltage Lockout
        7. 6.3.4.7 Buck Overcurrent Protection
      5. 6.3.5 Charge Pump
      6. 6.3.6 Slew Rate Control
      7. 6.3.7 Cross Conduction (Dead Time)
      8. 6.3.8 Propagation Delay
      9. 6.3.9 Protections
        1. 6.3.9.1 PVDD Supply Undervoltage Lockout
        2. 6.3.9.2 AVDD Undervoltage Lockout
        3. 6.3.9.3 VCP Charge Pump Undervoltage Lockout
        4. 6.3.9.4 Overcurrent Latched Protection
        5. 6.3.9.5 Thermal Shutdown (OTSD)
          1. 6.3.9.5.1 OTSD FET
          2. 6.3.9.5.2 OTSD (Non-FET)
    4. 6.4 Device Functional Modes
      1. 6.4.1 Functional Modes
        1. 6.4.1.1 Reset Mode
        2. 6.4.1.2 Operating Mode
        3. 6.4.1.3 Fault Reset (RESETZ Pulse)
      2. 6.4.2 OUTOFF functionality
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Design Procedure
      2. 7.2.2 Voltage and Current Sense Circuitry
  9. 8 Power Supply Recommendations
    1. 8.1 Bulk Capacitance
  10. 9 Layout
    1. 9.1 Layout Guidelines
    2. 9.2 Layout Example
    3. 9.3 Thermal Considerations
      1. 9.3.1 Power Dissipation
  11. 10Device and Documentation Support
    1. 10.1 サード・パーティ製品に関する免責事項
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 ドキュメントの更新通知を受け取る方法
    4. 10.4 サポート・リソース
    5. 10.5 Trademarks
    6. 10.6 静電気放電に関する注意事項
    7. 10.7 用語集
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Tape and Reel Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.3.3 AVDD Linear Voltage Regulator

A 3.3V linear regulator is integrated into the DRV2911-Q1 family of devices and is available for use by external circuitry. The AVDD regulator is used for powering up the internal digital circuitry of the device and additionally, this regulator can also provide the supply voltage for a low-power MCU or other circuitry supporting low current (up to 30mA). The output of the AVDD regulator should be bypassed near the AVDD pin with an X5R or X7R, 1µF, 6.3V ceramic capacitor routed directly back to the adjacent AGND ground pin.

The AVDD nominal, no-load output voltage is 3.3V.

DRV2911-Q1 AVDD Linear Regulator Block DiagramFigure 6-6 AVDD Linear Regulator Block Diagram

Use Equation 1 to calculate the power dissipated in the device by the AVDD linear regulator based on VBK.

Equation 1. P=(VBK - AVDD)   ✕  IAVDD

For example, at a VBK of 30V, drawing 20mA out of AVDD results in power dissipation as shown in Equation 2.

Equation 2. P=5V-3.3V ✕ 10mA = 17mW