JAJSEX6B December   2017  – October 2019 INA381

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1.     Device Images
      1.      代表的なアプリケーション
  4. 4 改訂履歴
  5. 5 概要（続き）
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Wide Input Common-Mode Voltage Range
      2. 8.3.2 Precise Low-Side Current Sensing
      3. 8.3.3 High Bandwidth and Slew Rate
      4. 8.3.4 Alert Output
      5. 8.3.5 Adjustable Overcurrent Threshold
      6. 8.3.6 Comparator Hysteresis
    4. 8.4 Device Functional Modes
      1. 8.4.1 Alert Modes
        1. 8.4.1.1 Transparent Output Mode
        2. 8.4.1.2 Latch Output Mode
  9. 9 Applications and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Select a Current-Sensing Resistor
        1. 9.1.1.1 Select a Current-Sensing Resistor: Example
      2. 9.1.2 Increase Comparator Hysteresis
      3. 9.1.3 Operation With Common-Mode Transients Greater Than 26 V
      4. 9.1.4 Input Filtering
    2. 9.2 Typical Applications
      1. 9.2.1 Bidirectional Window Comparator
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
        3. 9.2.1.3 Application Curve
      2. 9.2.2 Solenoid Low-Side Current Sensing
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Detailed Design Procedure
        3. 9.2.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12デバイスおよびドキュメントのサポート
    1. 12.1 ドキュメントのサポート
      1. 12.1.1 関連資料
    2. 12.2 ドキュメントの更新通知を受け取る方法
    3. 12.3 サポート・リソース
    4. 12.4 商標
    5. 12.5 静電気放電に関する注意事項
    6. 12.6 Glossary
  13. 13メカニカル、パッケージ、および注文情報

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • DGS|10
  • DSG|8
サーマルパッド・メカニカル・データ
発注情報

8.3.6 Comparator Hysteresis

The onboard comparator in the INA381 is designed to reduce the possibility of oscillations in the alert output when the measured signal level is near the overlimit threshold level as a result of noise. When the voltage (VCMPIN) exceeds the voltage developed at the CMPREF pin, the ALERT pin asserts and pulls low. The output voltage must drop to less than the CMPREF pin threshold voltage, as shown in Figure 44, by the hysteresis level of 50 mV so that the ALERT pin deasserts and returns to the nominal high state. The INA381 is designed with a hysteresis of 50 mV.

INA381 FigHysteresis.gifFigure 44. Typical Comparator Hysteresis