JAJSVN0 データシート

JAJSVN0E July 2009 – November 2024 ISO7220A-Q1 , ISO7221A-Q1 , ISO7221C-Q1

PRODUCTION DATA

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）

D|8
- MSOI002K

サーマルパッド・メカニカル・データ

発注情報

5.14 Switching Characteristics

V_CC1 = V_CC2 = 5 V ± 10%, over recommended operating conditions (unless otherwise noted)

PARAMETER			TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_pLH, t_pHL	Propagation delay	ISO722xA-Q1	See Figure 6-1	252	405	600	ns
PWD	Pulse-width distortion \|t_pHL – t_pLH\|⁽¹⁾	ISO722xA-Q1	See Figure 6-1		1	18	ns
t_pLH, t_pHL	Propagation delay	ISO722xC-Q1	See Figure 6-1	21	32	42	ns
PWD	Pulse-width distortion \|t_pHL – t_pLH\|⁽¹⁾	ISO722xC-Q1	See Figure 6-1		1	2	ns
t_sk(pp)	Part-to-part skew ⁽²⁾	ISO722xA-Q1				180	ns
t_sk(pp)	Part-to-part skew ⁽²⁾	ISO722xC-Q1				10	ns
t_sk(o)	Channel-to-channel output skew ⁽³⁾	ISO7220A-Q1			3	15	ns
t_r	Output signal rise time		See Figure 6-1		2.3		ns
t_f	Output signal fall time		See Figure 6-1		2.3		ns
t_fs	Failsafe output delay time from input power loss		See Figure 6-2		3		μs

(1) Also referred to as pulse skew.

(2) t_sk(pp) is the magnitude of the difference in propagation delay times between any specified terminals of two devices when both devices operate with the same supply voltages, at the same temperature, and have identical packages and test circuits.

(3) t_sk(o) is the skew between specified outputs of a single device with all driving inputs connected together and the outputs switching in the same direction while driving identical specified loads.