JAJSRI9B October   2023  – June 2024 LM51772

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 Handling Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Buck-Boost Control Scheme
        1. 7.3.1.1 Buck Mode
        2. 7.3.1.2 Boost Mode
        3. 7.3.1.3 Buck-Boost Mode
      2. 7.3.2  Power Save Mode
      3. 7.3.3  Programmable Conduction Mode PCM
      4. 7.3.4  Reference System
        1. 7.3.4.1 VIO LDO and nRST-PIN
      5. 7.3.5  Supply Voltage Selection – VSMART Switch and Selection Logic
      6. 7.3.6  Enable and Undervoltage Lockout
        1. 7.3.6.1 UVLO
        2. 7.3.6.2 VDET Comparator
      7. 7.3.7  Internal VCC Regulators
        1. 7.3.7.1 VCC1 Regulator
        2. 7.3.7.2 VCC2 Regulator
      8. 7.3.8  Error Amplifier and Control
        1. 7.3.8.1 Output Voltage Regulation
        2. 7.3.8.2 Output Voltage Feedback
        3. 7.3.8.3 Voltage Regulation Loop
        4. 7.3.8.4 Dynamic Voltage Scaling
      9. 7.3.9  Output Voltage Discharge
      10. 7.3.10 Peak Current Sensor
      11. 7.3.11 Short Circuit - Hiccup Protection
      12. 7.3.12 Current Monitor/Limiter
        1. 7.3.12.1 Overview
        2. 7.3.12.2 Output Current Limitation
        3. 7.3.12.3 Output Current Monitor
      13. 7.3.13 Oscillator Frequency Selection
      14. 7.3.14 Frequency Synchronization
      15. 7.3.15 Output Voltage Tracking
        1. 7.3.15.1 Analog Voltage Tracking
        2. 7.3.15.2 Digital Voltage Tracking
      16. 7.3.16 Slope Compensation
      17. 7.3.17 Configurable Soft Start
      18. 7.3.18 Drive Pin
      19. 7.3.19 Dual Random Spread Spectrum – DRSS
      20. 7.3.20 Gate Driver
      21. 7.3.21 Cable Drop Compensation (CDC)
      22. 7.3.22 CFG-pin and R2D Interface
      23. 7.3.23 Advanced Monitoring Features
        1. 7.3.23.1  Overview
        2. 7.3.23.2  BUSY
        3. 7.3.23.3  OFF
        4. 7.3.23.4  VOUT
        5. 7.3.23.5  IOUT
        6. 7.3.23.6  INPUT
        7. 7.3.23.7  TEMPERATURE
        8. 7.3.23.8  CML
        9. 7.3.23.9  OTHER
        10. 7.3.23.10 ILIM_OP
        11. 7.3.23.11 nFLT/nINT Pin Output
        12. 7.3.23.12 Status Byte
      24. 7.3.24 Protection Features
        1. 7.3.24.1  Thermal Shutdown (TSD)
        2. 7.3.24.2  Over Current Protection
        3. 7.3.24.3  Output Over Voltage Protection 1 (OVP1)
        4. 7.3.24.4  Output Over Voltage Protection 2 (OVP2)
        5. 7.3.24.5  Input Voltage Protection (IVP)
        6. 7.3.24.6  Input Voltage Regulation (IVR)
        7. 7.3.24.7  Power Good
        8. 7.3.24.8  Boot-Strap Under Voltage Protection
        9. 7.3.24.9  Boot-strap Over Voltage Clamp
        10. 7.3.24.10 CRC - CHECK
    4. 7.4 Device Functional Modes
      1. 7.4.1 Overview
      2. 7.4.2 Logic State Description
    5. 7.5 Programming
      1. 7.5.1 I2C Bus Operation
      2. 7.5.2 Clock Stretching
      3. 7.5.3 Data Transfer Formats
      4. 7.5.4 Single READ from a Defined Register Address
      5. 7.5.5 Sequential READ Starting from a Defined Register Address
      6. 7.5.6 Single WRITE to a Defined Register Address
      7. 7.5.7 Sequential WRITE Starting at a Defined Register Address
  9. 8 LM51772 Registers
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1  Custom Design with WEBENCH Tools
        2. 9.2.2.2  Frequency
        3. 9.2.2.3  Feedback Divider
        4. 9.2.2.4  Inductor and Current Sense Resistor Selection
        5. 9.2.2.5  Output Capacitor
        6. 9.2.2.6  Input Capacitor
        7. 9.2.2.7  Slope Compensation
        8. 9.2.2.8  UVLO Divider
        9. 9.2.2.9  Soft-Start Capacitor
        10. 9.2.2.10 MOSFETs QH1 and QL1
        11. 9.2.2.11 MOSFETs QH2 and QL2
        12. 9.2.2.12 Loop Compensation
        13. 9.2.2.13 External Component Selection
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
        1. 9.4.1.1 Power Stage Layout
        2. 9.4.1.2 Gate Driver Layout
        3. 9.4.1.3 Controller Layout
      2. 9.4.2 Layout Example
    5. 9.5 USB-PD Source with Power Path
    6. 9.6 Parallel (Multiphase) Operation
    7. 9.7 Constant Current LED Driver
    8. 9.8 Wireless Charging Supply
    9. 9.9 Bi-Directional Power Backup
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 ドキュメントの更新通知を受け取る方法
    3. 10.3 サポート・リソース
    4. 10.4 Trademarks
    5. 10.5 静電気放電に関する注意事項
    6. 10.6 用語集
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

7.3.22 CFG-pin and R2D Interface

The LM51772 has four resistor to digital configuration pins (R2D), where the CFG1 is used to control to the ADDR/SLOPE -pin. The channels CFG3 and CFG4 are multiplexed with the SDA/SCL pins, and can only be used when I2C function is disabled.

The resistor value on the CFG pins is read and latched during the power-up sequence of the device. The selection cannot be changed until the voltage on the nRST pin is toggled or VCC2 voltage drops below the VVCC2T-(UVLO) threshold. The Table 7-4 shows the possible device configurations versus the different resistor values on the CFG pins.

Table 7-4 ADDR/Slope Pin (R2D-CH1) Configuration Overview
# R(CFG) / kΩ I2C/ADDR Slope Compensation (m(SC))
1 GND I2C ENABLED Address 0x6A Default NVM setting 0.875
2 0.511 I2C DISABLED 0.25
3 1.15 0.375
4 1.9 0.5
5 2.7 0.625
6 3.8 0.75
7 5.1 0.875
8 6.5 1
9 8.3 1.5
10 10.5 2
11 13.3 2.5
12 16.2 3
13 20.5 3.5
14 24.9 4
15 30.1 4.5
16 VCC2 I2C ENABLED Address 0x6B Default NVM setting 0.875
Table 7-5 CFG2 Pin (R2D-CH2) Configuration Overview
# R(CFG) / kΩ EN_SYNC_OUT SYNC_IN_FALLING VDET_EN PCM_EN
1 0 DISABLED DISABLED DISABLED DISABLE
2 0.511 ENABLED
3 1.15 DISABLED ENABLED
4 1.9 ENABLED
5 2.7 DISABLED DISABLED ENABLED
6 3.8 ENABLED
7 5.1 DISABLED ENABLED
8 6.5 ENABLED
9 8.3 DISABLED DISABLED DISABLED ENABLED (30%)
10 10.5 ENABLED
11 13.3 DISABLED ENABLED
12 16.2 ENABLED
13 20.5 DISABLED DISABLED ENABLED
14 24.9 ENABLED
15 30.1 DISABLED ENABLED
16 36.5 ENABLED
Table 7-6 CFG3 Pin (R2D-CH3) Configuration Overview
# R(CFG) / kΩ EN_VCC1 INC_INDUCT_DE-RATE μSLEEP SCALE_DT
1 0 DISABLED DISABLED (30%) DISABLED DISABLE
2 0.511 ENABLED
3 1.15 DISABLED ENABLED (40%)
4 1.9 ENABLED
5 2.7 DISABLED DISABLED (30%) ENABLED
6 3.8 ENABLED
7 5.1 DISABLED ENABLED (40%)
8 6.5 ENABLED
9 8.3 DISABLED DISABLED (30%) DISABLED ENABLED
10 10.5 ENABLED
11 13.3 DISABLED ENABLED (40%)
12 16.2 ENABLED
13 20.5 DISABLED DISABLED (30%) ENABLED
14 24.9 ENABLED
15 30.1 DISABLED ENABLED (40%)
16 36.5 ENABLED
Table 7-7 CFG4 Pin (R2D-CH4) Configuration Overview
# R(CFG) / kΩ DRSS SCP – Hiccup Mode Negative Current Limit Current Limit
1 0 DISABLED DISABLED DISABLED DISABLE
2 0.511 ENABLED
3 1.15 DISABLED ENABLED
4 1.9 ENABLED
5 2.7 DISABLED DISABLED ENABLED
6 3.8 ENABLED
7 5.1 DISABLED ENABLED
8 6.5 ENABLED
9 8.3 DISABLED DISABLED DISABLED ENABLED
10 10.5 ENABLED
11 13.3 DISABLED ENABLED
12 16.2 ENABLED
13 20.5 DISABLED DISABLED ENABLED
14 24.9 ENABLED
15 30.1 DISABLED ENABLED
16 36.5 ENABLED