SLASFA2 Data sheet

SLASFA2 November 2024 MSPM0G3519

ADVANCE INFORMATION

over operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
dVDD/dt	VDD (supply voltage) slew rate	Rising			0.1	V/us
		Falling ⁽²⁾			0.01	V/us
		Falling, STANDBY			0.1	V/ms
V_POR+	Power-on reset voltage level	Rising ⁽¹⁾	0.91	1.30	1.5	V
V_POR-	Power-on reset voltage level	Falling ⁽¹⁾	0.87	1.25	1.48	V
V_{HYS, POR}	POR hysteresis		30	58	74	mV
V_{BOR0+, COLD}	Brown-out reset voltage level 0 (default level)	-40℃ ≤ Tj ≤ 30℃ Cold start, rising ⁽¹⁾	1.45	1.54	1.62	V
		30℃ ≤ Tj ≤ 85℃ Cold start, rising ⁽¹⁾	1.48	1.56	1.64
		85℃ ≤ Tj ≤ 130℃ Cold start, rising ⁽¹⁾	1.48	1.57	1.66
V_BOR0+		Rising ⁽¹⁾ ⁽²⁾	1.56	1.59	1.62
V_BOR0-		Falling ⁽¹⁾ ⁽²⁾	1.55	1.58	1.61
V_{BOR0, STBY}		STANDBY mode ⁽¹⁾	1.51	1.56	1.61
V_BOR1+	Brown-out-reset voltage level 1	Rising ⁽¹⁾ ⁽²⁾	2.13	2.17	2.21	V
V_BOR1-		Falling ⁽¹⁾ ⁽²⁾	2.10	2.14	2.18
V_{BOR1, STBY}		STANDBY mode ⁽¹⁾	2.06	2.13	2.20
V_BOR2+	Brown-out-reset voltage level 2	Rising ⁽¹⁾ ⁽²⁾	2.73	2.77	2.82	V
V_BOR2-		Falling ⁽¹⁾ ⁽²⁾	2.7	2.74	2.79
V_{BOR2, STBY}		STANDBY mode ⁽¹⁾	2.62	2.71	2.8
V_BOR3+	Brown-out-reset voltage level 3	Rising ⁽¹⁾ ⁽²⁾	2.88	2.96	3.04	V
V_BOR3-		Falling ⁽¹⁾ ⁽²⁾	2.85	2.93	3.01
V_{BOR3, STBY}		STANDBY mode ⁽¹⁾	2.82	2.92	3.02
V_HYS,BOR	Brown-out reset hysteresis	Level 0 ⁽¹⁾		15	21	mV
V_HYS,BOR	Brown-out reset hysteresis	Levels 1-3 ⁽¹⁾		34	40	mV
T_{PD, BOR}	BOR propagation delay	RUN/SLEEP/STOP mode			5	us
T_{PD, BOR}	BOR propagation delay	STANDBY mode			100	us

(1) |dVDD/dt| ≤ 3V/s

(2) Device operating in RUN, SLEEP, or STOP mode.