JAJSO90A february   2023  – july 2023 OPA2863-Q1

PRODUCTION DATA  

  1.   1
  2. 特長
  3. アプリケーション
  4. 概要
  5. Revision History
  6. Device Comparison Table
  7. Pin Configuration and Functions
  8. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics: VS = ±5 V
    6. 7.6 Electrical Characteristics: VS = 3 V
    7. 7.7 Typical Characteristics: VS = ±5 V
    8. 7.8 Typical Characteristics: VS = 3 V
    9. 7.9 Typical Characteristics: VS = 3 V to 10 V
  9. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Input Stage
      2. 8.3.2 Output Stage
        1. 8.3.2.1 Overload Power Limit
      3. 8.3.3 ESD Protection
    4. 8.4 Device Functional Modes
  10. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Low-Side Current Sensing
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
        3. 9.2.1.3 Application Curve
      2. 9.2.2 Front-End Gain and Filtering
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 ドキュメントの更新通知を受け取る方法
    3. 10.3 サポート・リソース
    4. 10.4 Trademarks
    5. 10.5 静電気放電に関する注意事項
    6. 10.6 用語集
  12. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ(パッケージ|ピン)
  • D|8
サーマルパッド・メカニカル・データ
発注情報

Electrical Characteristics: VS = 3 V

at G = 1 V/V, RF = 0 Ω for G =1 V/V, otherwise RF = 1 kΩ for other gains, CL = 1 pF, RL = 2 kΩ connected to 1 V, input and output VCM = 1 V, and TA ≅ 25°C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
AC PERFORMANCE
SSBW Small-signal bandwidth VOUT = 20 mVPP, G = 1 97 MHz
GBWP Gain-bandwidth product 50 MHz
LSBW Large-signal bandwidth VOUT = 1 VPP 26 MHz
Bandwidth for 0.1-dB flatness VOUT = 20 mVPP 10 MHz
SR Slew rate VOUT = 1-V step, G = –1 105 V/µs
Rise, fall time VOUT = 200-mV step 10 ns
Settling time To 0.1%, VOUT = 1-V step 58 ns
To 0.01%, VOUT = 1-V step 90
Overshoot VOUT = 1-V step 2 %
Undershoot VOUT = 1-V step 16 %
Overdrive recovery time G = –1, 0.5-V overdrive beyond supplies 95 ns
G = 1, 0.5-V overdrive beyond supplies 100
HD2 Second-order harmonic distortion f = 20 kHz, VOUT = 1 VPP –123 dBc
HD3 Third-order harmonic distortion f = 20 kHz, VOUT = 1 VPP –132 dBc
HD2 Second-order harmonic distortion f = 100 kHz, VOUT = 1 VPP –109 dBc
HD3 Third-order harmonic distortion f = 100 kHz, VOUT = 1 VPP –129 dBc
eN Input voltage noise 1/f corner at 25 Hz 6 nV/√Hz
iN Input current noise 1/f corner at 2 kHz 0.4 pA/√Hz
Closed-loop output impedance f = 1 MHz 0.2 Ω
Channel-to-channel crosstalk f = 1 MHz, VOUT = 1 VPP –127 dBc
DC PERFORMANCE
AOL Open-loop voltage gain VOUT = 1 V to 2 V 104 123 dB
VOS Input-referred offset voltage –1.5 ±0.4 1.5 mV
Input offset voltage drift TA = –40°C to +125°C –4 ±1 4 μV/°C
Input bias current TA ≅ 25°C 0.3 0.73 µA
TA = –40°C to +85°C 1.2
TA = –40°C to +125°C 1.6
Input bias current drift TA = –40°C to +125°C ±3 7.4 nA/°C
Input offset current –30 ±10 30 nA
INPUT
Input common-mode voltage VS––0.2 VS++0.2 V
CMRR Common-mode rejection ratio VCM = VS– – 0.2 V to VS+ – 1.6 V 94 115 dB
Input impedance common-mode 360 || 0.9 MΩ || pF
Input impedance differential mode 200 || 0.5 kΩ || pF
OUTPUT
VOL Output voltage, low TA ≅ 25°C VS–+ 0.13 VS–+ 0.15 V
TA = –40°C to +125°C VS–+ 0.13 VS–+ 0.16
VOH Output voltage, high TA ≅ 25°C VS+–0.15 VS+–0.13 V
TA = –40°C to +125°C VS+–0.15 VS+–0.13
Linear output drive
(sourcing and sinking)
VOUT = ±0.7 V, ΔVOS < 1 mV(1) 23 33 mA
Short-circuit current 45 mA
POWER SUPPLY
IQ Quiescent current per amplifier TA ≅ 25°C 690 910 µA
TA = –40°C to +125°C 1180
PSRR Power-supply rejection ratio ΔVS = ±1 V(2) 100 120 dB
AUXILIARY INPUT STAGE
Gain-bandwidth product 50 MHz
Input voltage noise 1/f corner at 25 Hz 6 nV/√Hz
Input current noise 1/f corner at 100 Hz 0.4 pA/√Hz
Input-referred offset voltage –1.5 ±0.15 1.5 mV
Input bias current TA ≅ 25°C 0.2 0.6 µA
TA = –40°C to +125°C 1.2
Common-mode rejection ratio VCM = 2.1 V to 3.2 V 100 120 dB
Power supply rejection ratio ΔVS = ±0.6 V 100 115 dB
Change in input offset voltage from no-load condition.

Change in supply voltage from the default test condition with only one of the positive or negative supplies changing corresponding to
+PSRR and –PSRR.