SLES211C February   2008  – July 2015 PCM1681 , PCM1681-Q1

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Description (continued)
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings: PCM1681
    3. 7.3 ESD Ratings: PCM1681-Q1
    4. 7.4 Recommended Operating Conditions
    5. 7.5 Thermal Information
    6. 7.6 Electrical Characteristics
    7. 7.7 Interface Timing Requirements
    8. 7.8 Typical Characteristics
      1. 7.8.1 Digital Filter (De-Emphasis Off)
      2. 7.8.2 De-Emphasis Filter
      3. 7.8.3 Analog Filter
      4. 7.8.4 Analog Dynamic Performance
        1. 7.8.4.1 Supply Voltage Characteristics
        2. 7.8.4.2 Temperature Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 System Clock Input
      2. 8.3.2 Power-on-Reset Function
      3. 8.3.3 Audio Serial Interface
      4. 8.3.4 Audio Data Formats and Timing
      5. 8.3.5 De-Emphasis Filter
      6. 8.3.6 Oversampling Rate Control
      7. 8.3.7 Zero Flag
      8. 8.3.8 Mode Control
        1. 8.3.8.1 Parallel Hardware Control
        2. 8.3.8.2 SPI Control Interface
        3. 8.3.8.3 Analog Outputs
          1. 8.3.8.3.1 VCOM Output
        4. 8.3.8.4 Register Write Operation
        5. 8.3.8.5 Interface Timing Requirements
    4. 8.4 Device Functional Modes
      1. 8.4.1 Control Modes
      2. 8.4.2 Audio Modes
    5. 8.5 Programming
      1. 8.5.1 I2C Interface
        1. 8.5.1.1 Slave Address
        2. 8.5.1.2 Packet Protocol
        3. 8.5.1.3 Write Operation
        4. 8.5.1.4 Read Operation
      2. 8.5.2 Mode Control Registers
        1. 8.5.2.1 User-Programmable Mode Controls
    6. 8.6 Register Maps
      1. 8.6.1 Reserved Registers
      2. 8.6.2 Register Definitions
        1. 8.6.2.1  ATx[7:0]: Digital Attenuation Level Setting
        2. 8.6.2.2  MUTx: Soft Mute Control
        3. 8.6.2.3  DACx: DAC Operation Control
        4. 8.6.2.4  FLT: Digital Filter Roll-Off Control
        5. 8.6.2.5  FMT[3:0]: Audio Interface Data Format
        6. 8.6.2.6  SRST: Reset
        7. 8.6.2.7  ZREV: Zero-Flag Polarity Select
        8. 8.6.2.8  DREV: Output Phase Select
        9. 8.6.2.9  DMF[1:0]: Sampling Frequency Selection for the De-Emphasis Function
        10. 8.6.2.10 DMC: Digital De-Emphasis All-Channel Function Control
        11. 8.6.2.11 REV[8:1]: Output Phase Select per Channel
        12. 8.6.2.12 OVER: Oversampling Rate Control
        13. 8.6.2.13 FLTx: Digital Filter Roll-Off Control per DATA Group
        14. 8.6.2.14 DAMS: Digital Attenuation Mode Select
        15. 8.6.2.15 AZRO[1:0]: Zero-Flag Channel-Combination Select
        16. 8.6.2.16 ZERO[8:1]: Zero-Detect Status (Read-Only, I2C Interface Only)
  9. Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 D/A Output Filter Circuits
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Hardware Control Method
        2. 9.2.2.2 Audio Input
        3. 9.2.2.3 Audio Output
        4. 9.2.2.4 Master Clock
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Third-Party Products Disclaimer
    2. 12.2 Documentation Support
      1. 12.2.1 Related Documentation
    3. 12.3 Related Links
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

6 Pin Configuration and Functions

PWP Package
28-Pin HTSSOP PowerPAD
Top View
PCM1681 PCM1681-Q1 po_2_les211.gif

Pin Functions

PIN I/O DESCRIPTION
NAME NO.
AGND1 18 Analog ground
AGND2 24 Analog ground
BCK 7 I Shift clock input for serial audio data (1)(2)
DATA1 6 I Serial audio data input for VOUT1 and VOUT2 (1)(2)
DATA2 11 I Serial audio data input for VOUT3 and VOUT4 (1)(2)
DATA3 12 I Serial audio data input for VOUT5 and VOUT6 (1)(2)
DATA4 13 I Serial audio data input for VOUT7 and VOUT8 (1)(2)
DGND 10 Digital ground
LRCK 8 I Left and right clock input. The frequency of this clock is equal to the sampling rate, fS. (1)(2)
MC/SCL/DEMP 3 I Shift clock input for SPI, serial clock input for I2C, de-emphasis control for H/W (1)(2)
MD/SDA/MUTE 4 I/O Serial data input for SPI, serial data input/output for I2C, mute control for H/W (1)(2)(3)
MS/ADR/FMT1 2 I Select input for SPI, address input for I2C, format control input 1 for H/W (1)(2)
MSEL 14 I Mode control select, I2C, H/W with narrow mode O/S, H/W with wide mode O/S, SPI select(1)(4)
SCK 5 I System clock input. Input frequency is 128, 192, 256, 384, 512, 768, or 1152 fS. (1)(2)
VCC1 17 Analog power supply, 5-V
VCC2 23 Analog power supply, 5-V
VCOM 25 Common voltage output. This pin should be bypassed with a 10-μF capacitor to AGND.
VDD 9 Digital power supply, 3.3-V
VOUT1 27 O Voltage output for audio signal corresponding to L-ch on DATA1
VOUT2 26 O Voltage output for audio signal corresponding to R-ch on DATA1
VOUT3 22 O Voltage output for audio signal corresponding to L-ch on DATA2
VOUT4 21 O Voltage output for audio signal corresponding to R-ch on DATA2
VOUT5 20 O Voltage output for audio signal corresponding to L-ch on DATA3
VOUT6 19 O Voltage output for audio signal corresponding to R-ch on DATA3
VOUT7 16 O Voltage output for audio signal corresponding to L-ch on DATA4
VOUT8 15 O Voltage output for audio signal corresponding to R-ch on DATA4
ZR1/ZR1/FMT0 1 I/O Zero-flag output 1 for SPI, zero-flag output 1 for I2C, format control input 0 for H/W(1)
ZR2 28 O Zero-flag output 2
(1) Schmitt-trigger input.
(2) 5-V tolerant.
(3) Open-drain output in I2C mode.
(4) VDD/2 biased, quad state input.