Place the power-supply bypass
capacitor as close as possible to the supply and ground pins. The recommended
value of this bypass capacitor is from 0.1 μF to 10 μF. If necessary, additional
decoupling capacitance can be added to compensate for noisy or high-impedance
power supplies. The smallest capacitor must be placed closest to the
device.
The output must be decoupled with
a 1 μF to 100 μF low ESR (maximum 1 Ω) capacitor.
Place a 1 μF to 100 μF low
leakage noise filtering capacitor between the NR pin and ground.