JAJSPR6 データシート

JAJSPR6B October 2003 – January 2023 SN65LBC176-Q1

PRODUCTION DATA

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）

サーマルパッド・メカニカル・データ

発注情報

jajspr6b_oa

5.4 Electrical Characteristics - Driver

over operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	MAX	UNIT
V_IK	Input clamp voltage	I_I = − 18 mA			-1.5	V
V_O	Output voltage	I_O = 0		0	6	V
\|V_OD1\|	Differential output voltage	I_O = 0		1.5	6	V
V_OD3	Differential output voltage	V_test= −7 V to 12 V	See Fig 2, ⁽³⁾	1.1		V
\|V_OD2\|	Differential output voltage	R_L = 54 Ω	See Fig 1, ⁽³⁾	1.1		V
Δ\|V_OD\|	Change in magnitude of differential output voltage⁽¹⁾	R_L = 54 Ω or 100 Ω See Fig 1			±0.2	V
V_OC	Common-mode output voltage				-1	V
Δ\|V_OC\|	Change in magnitude of common-mode output voltage⁽¹⁾				±0.2	V
I_O	Output current	Output disabled, ⁽⁵⁾	V_O = 12 V		1	mA
I_O	Output current	Output disabled, ⁽⁵⁾	V_O = -7 V		-0.8	mA
I_IH	High-level input current	V_I = 2.4 V			-100	µA
I_IL	Low-level input current	V_I = 0.4 V			-100	µA
I_OS	Short-circuit output current	V_O = -7 V			-250	mA
		V_O = 0 V			-150	mA
		V_O = V_CC			250	mA
		V_O = 12 V			250	mA
I_CC	Supply current	V_I = 0 or V_CC, No Load	Receiver disabled and driver enabled		1.75	mA
I_CC	Supply current	V_I = 0 or V_CC, No Load	Receiver and driver disabled		0.25	mA

(1) Δ | V_OD | and Δ | V_OC | are the changes in magnitude of V_OD and V_OC, respectively, that occur when the input changes from a high level to a low level.

(3) This device meets the ANSI Standard RS-485 VOD requirements above 0°C only.

(5) This applies for both power on and off; refer to ANSI Standard RS-485 for exact conditions.