SBFS022C June   2003  – October 2015 SRC4192 , SRC4193

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Input Port Operation
      2. 7.3.2 Output Port Operation
      3. 7.3.3 Soft Mute Function
      4. 7.3.4 Digital Attenuation (SRC4193 Only)
      5. 7.3.5 Ready Output
      6. 7.3.6 Ratio Output (SRC4193 Only)
      7. 7.3.7 Serial Peripheral Interface (SPI) Port: SRC4193 Only
    4. 7.4 Device Functional Modes
      1. 7.4.1 Reset and Power Down Operation
      2. 7.4.2 Audio Port Modes
      3. 7.4.3 Bypass Mode
    5. 7.5 Register Maps
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Interfacing to Digital Audio Receivers and Transmitters
      2. 8.1.2 TDM Applications
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Control Method
        2. 8.2.2.2 Audio Input and Output
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Reference Clock
      2. 10.1.2 Pin Compatibility With the Analog Devices AD1896 (SRC4192 Only)
        1. 10.1.2.1 Crystal Oscillator
        2. 10.1.2.2 Reference Clock Frequency
        3. 10.1.2.3 Master Mode Maximum Sampling Frequency
        4. 10.1.2.4 Matched Phase Mode
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Related Links
    3. 11.3 Community Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • DB|28
サーマルパッド・メカニカル・データ
発注情報

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)
MIN MAX UNIT
Supply Voltage VDD –0.3 4 V
VIO –0.3 4
Digital Input Voltage –0.3 4
Operating Temperature –45 85 °C
Storage temperature, Tstg –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±3000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±1500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
Supply voltage VDD 3 3.3 3.6 V
VIO 1.8 V 1.65 1.8 1.95
VIO 3.3 V 3 3.3 3.6
Operating temperature –45 85 °C

6.4 Thermal Information

THERMAL METRIC(1) SRC4192
SRC4193		 UNIT
DB (SSOP)
28 PINS
RθJA Junction-to-ambient thermal resistance 78.6 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 38.1 °C/W
RθJB Junction-to-board thermal resistance 39.3 °C/W
ψJT Junction-to-top characterization parameter 7.1 °C/W
ψJB Junction-to-board characterization parameter 38.9 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance N/A °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.

6.5 Electrical Characteristics

All parameters specified with TA = 25°C, VDD = 3.3 V, and VIO = 3.3 V, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
DYNAMIC PERFORMANCE(1)
Resolution 24 Bits
fSIN Input sampling frequency 4 212 kHz
fSOUT Output sampling frequency 4 212 kHz
Input: output sampling ratio Upsampling 1:16
Downsampling 16:1
Dynamic range 44.1 kHz; 48 kHz BW = 20 Hz to fSOUT/2, –60-dBFS Input
fIN = 1 kHz, Unweighted (add 3 dB to spec for A-weighted result)		 140 dB
48 kHz; 44.1 kHz 140
48 kHz; 96 kHz 140
44.1 kHz; 192 kHz 138
96 kHz; 48 kHz 141
192 kHz; 12 kHz 141
192 kHz; 32 kHz 141
192 kHz; 48 kHz 141
32 kHz; 48 kHz 140
12 kHz; 192 kHz 138
Total harmonic distortion + noise 44.1 kHz; 48 kHz BW = 20 Hz to fSOUT/2, 0-dBFS Input fIN = 1 kHz, Unweighted –140 dB
48 kHz; 44.1 kHz –140
48 kHz; 96 kHz –140
44.1 kHz; 192 kHz –137
96 kHz; 48 kHz –140
192 kHz; 12 kHz –140
192 kHz; 32 kHz –141
192 kHz; 48 kHz –141
32 kHz; 48 kHz –140
12 kHz; 192 kHz –137
Interchannel gain mismatch 0 dB
Interchannel phase deviation 0 °
Digital attenuation Minimum SRC4193 Only 0 dB
Maximum –127.5
Step Size 0.5
Mute attenuation 24-Bit Word Length, A-weighted –144 dB
DIGITAL INTERPOLATION FILTER CHARACTERISTICS
Passband 0.4535 × fSIN Hz
Passband ripple ±0.007 dB
Transition band 0.4535 × fSIN 0.5465 × fSIN Hz
Stop band 0.5465 × fSIN Hz
Stop band attenuation –144 dB
Normal group delay (LGRP = 0) Decimation Filter On (DFLT = 0) 102.53125/fSIN s
Decimation Filter Off (DFLT = 1) 102/fSIN
Low group delay (LGRP = 1) Decimation Filter On (DFLT = 0) 70.53125/fSIN s
Decimation Filter Off (DFLT = 1) 70/fSIN
DIGITAL DECIMATION FILTER CHARACTERISTICS
Passband 0.4535 × fSOUT Hz
Passband ripple ±0.008 dB
Transition band 0.4535 × fSOUT 0.5465 × fSOUT Hz
Stop band 0.5465 × fSOUT Hz
Stop band attenuation –143 dB
Group delay – decimation filter DFLT = 0 for SRC4193 36.46875/fSOUT s
Direct downsampling SRC4193 only, DFLT = 1 0 s
DIGITAL I/O CHARACTERISTICS
VIH High-level input voltage 0.7 × VIO VIO V
VIL Low-level input voltage 0 0.3 × VIO V
IIH High-level input current 0.5 10 µA
IIL Low-level input current 0.5 10 µA
VOH High-level output voltage IO = –4 mA 0.8 × VIO VIO V
VOL Low-level output voltage IO = +4 mA 0 0.2 × VIO V
CIN Input Capacitance 3 pF
POWER SUPPLIES
Operating voltage, VDD 3 3.3 3.6 V
Operating voltage, VIO 1.65 3.3 3.6
Supply current, IDD, power down VDD = 3.3 V, VIO = 3.3 V, RST = 0, No Clocks 100 µA
SRC4193 only, VDD = 3.3 V, VIO = 3.3 V,
PDN Bit = 0, No Clocks		 5 mA
Supply current, IDD, dynamic VDD = 3.3 V, VIO = 3.3 V, fSIN = fSOUT = 192 kHz 66 mA
Supply current, IIO, power down VDD = 3.3 V, VIO = 3.3 V, RST = 0, No Clocks 100 µA
SRC4193 only, VDD = 3.3 V, VIO = 3.3 V,
PDN Bit = 0, No Clocks		 21
Supply current, IIO, dynamic VDD = 3.3 V, VIO = 3.3 V, fSIN = fSOUT = 192 kHz 2 mA
Total power dissipation, PD, power down VDD = 3.3 V, VIO = 3.3 V, RST = 0, No Clocks 660 µW
SRC4193 only, VDD = 3.3 V, VIO = 3.3 V,
PDN Bit = 0, No Clocks		 16.6 mW
Total power dissipation, PD, dynamic VDD = 3.3 V, VIO = 3.3 V, fSIN = fSOUT = 192 kHz 225 mW
(1) Dynamic performance measured with an Audio Precision System Two Cascade or Cascade Plus.

6.6 Switching Characteristics

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
REFERENCE CLOCK TIMING
RCKI frequency fSMIN = min (fSIN, fSOUT),
fSMAX = max (fSIN, fSOUT) 		128 × fSMIN 50 MHz
tRCKIP RCKI period 20 1/(128 ×fSMIN) ns
tRCKIH RCKI pulsewidth high 0.4 × tRCKIP ns
tRCKIL RCKI pulsewidth low 0.4 × tRCKIP ns
RESET TIMING
tRSTL RST pulse width low 500 ns
Delay following RST rising edge SRC4193 only 500 µs
INPUT SERIAL PORT TIMING
tLRIS LRCKI to BCKI setup time 10 ns
tSIH BCKI pulsewidth high 10 ns
tSIL BCKI pulsewidth low 10 ns
tLDIS SDIN data setup time 10 ns
tLDIH SDIN data hold time 10 ns
OUTPUT SERIAL PORT TIMING
tDOPD SDOUT data delay time 10 ns
tDOH SDOUT data hold time 2 ns
tSOH BCKO pulsewidth high 10 ns
tSOL BCKO pulsewidth low 5 ns
TDM MODE TIMING
tLROS LRCKO setup time 10 ns
tLROH LRCKO hold time 10 ns
tTDMS TDMI data setup time 10 ns
tTDMH TDMI data hold time 10 ns
SPI TIMING
CCLK frequency 25 MHz
tCDS CDATA setup time 12 ns
tCDH CDATA hold time 8 ns
tCSCR CS falling to CCLK rising 15 ns
tCFCS CCLK falling to CS rising 12 ns

6.7 Typical Characteristics

At TA = 25°C, VDD = 3.3 V, and VIO = 3.3 V, unless otherwise noted.
SRC4192 SRC4193 sbfs022_typchar_1.gif
12 kHz:192 kHz
Figure 1. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_3.gif
32 kHz:48 kHz
Figure 3. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_5.gif
44.1 kHz:48 kHz
Figure 5. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_7.gif
44.1 kHz:96 kHz
Figure 7. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_9.gif
44.1 kHz:192 kHz
Figure 9. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_11.gif
48 kHz:44.1 kHz
Figure 11. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_13.gif
48 kHz:96 kHz
Figure 13. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_15.gif
48 kHz:192 kHz
Figure 15. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_17.gif
96 kHz:44.1 kHz
Figure 17. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_19.gif
96 kHz:48 kHz
Figure 19. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_21.gif
96 kHz:192 kHz
Figure 21. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_23.gif
192 kHz:12 kHz
Figure 23. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_25.gif
192 kHz:32 kHz
Figure 25. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_27.gif
192 kHz:44.1 kHz
Figure 27. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_29.gif
192 kHz:48 kHz
Figure 29. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_31.gif
192 kHz:96 kHz
Figure 31. FFT With 1-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_33.gif
44.1 kHz:48 kHz
Figure 33. FFT With 20-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_35.gif
48 kHz:48 kHz
Figure 35. FFT With 20-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_37.gif
96 kHz:48 kHz
Figure 37. FFT With 20-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_39.gif
44.1 kHz:48 kHz
Figure 39. THD+N vs Input Amplitude fIN = 1 kHz
SRC4192 SRC4193 sbfs022_typchar_41.gif
48 kHz:96 kHz
Figure 41. THD+N vs Input Amplitude fIN = 1 kHz
SRC4192 SRC4193 sbfs022_typchar_43.gif
44.1 kHz:192 kHz
Figure 43. THD+N vs Input Amplitude fIN = 1 kHz
SRC4192 SRC4193 sbfs022_typchar_45.gif
44.1 kHz:48 kHz
Figure 45. THD+N vs Input Frequency, 0-dBFS Input
SRC4192 SRC4193 sbfs022_typchar_47.gif
48 kHz:96 kHz
Figure 47. THD+N vs Input Frequency, 0-dBFS Input
SRC4192 SRC4193 sbfs022_typchar_49.gif
44.1 kHz:48 kHz
Figure 49. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_51.gif
48 kHz:48 kHz
Figure 51. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_53.gif
96 kHz:48 kHz
Figure 53. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_55.gif
192 kHz:44.1 kHz
Figure 55. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_57.gif
48k:48k
Figure 57. Pass Band Ripple
SRC4192 SRC4193 sbfs022_typchar_2.gif
12 kHz:192 kHz
Figure 2. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_4.gif
32 kHz:48 kHz
Figure 4. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_6.gif
44.1 kHz:48 kHz
Figure 6. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_8.gif
44.1 kHz:96 kHz
Figure 8. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_10.gif
44.1 kHz:192 kHz
Figure 10. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_12.gif
48 kHz:44.1 kHz
Figure 12. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_14.gif
48 kHz:96 kHz
Figure 14. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_16.gif
48 kHz:192 kHz
Figure 16. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_18.gif
96 kHz:44.1 kHz
Figure 18. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_20.gif
96 kHz:48 kHz
Figure 20. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_22.gif
96 kHz:192 kHz
Figure 22. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_24.gif
192 kHz:12 kHz
Figure 24. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_26.gif
192 kHz:32 kHz
Figure 26. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_28.gif
192 kHz:44.1 kHz
Figure 28. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_30.gif
192 kHz:48 kHz
Figure 30. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_32.gif
192 kHz:96 kHz
Figure 32. FFT With 1-kHz Input Tone at –60 dBFS
SRC4192 SRC4193 sbfs022_typchar_34.gif
48 kHz:44.1 kHz
Figure 34. FFT With 20-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_36.gif
48 kHz:96 kHz
Figure 36. FFT With 20-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_38.gif
192 kHz:192 kHz
Figure 38. FFT With 80-kHz Input Tone at 0 dBFS
SRC4192 SRC4193 sbfs022_typchar_40.gif
48 kHz:44.1 kHz
Figure 40. THD+N vs Input Amplitude fIN = 1 kHz
SRC4192 SRC4193 sbfs022_typchar_42.gif
96 kHz:48 kHz
Figure 42. THD+N vs Input Amplitude fIN = 1 kHz
SRC4192 SRC4193 sbfs022_typchar_44.gif
192 kHz:48 kHz
Figure 44. THD+N vs Input Amplitude fIN = 1 kHz
SRC4192 SRC4193 sbfs022_typchar_46.gif
48 kHz:44.1 kHz
Figure 46. THD+N vs Input Frequency, 0-dBFS Input
SRC4192 SRC4193 sbfs022_typchar_48.gif
96 kHz:48 kHz
Figure 48. THD+N vs Input Frequency, 0-dBFS Input
SRC4192 SRC4193 sbfs022_typchar_50.gif
48 kHz:44.1 kHz
Figure 50. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_52.gif
48 kHz:96 kHz
Figure 52. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_54.gif
44.1 kHz:192 kHz
Figure 54. Linearity With fIN = 200 Hz
SRC4192 SRC4193 sbfs022_typchar_56.gif
Figure 56. Frequency Response With 0-dBFS Input
SRC4192 SRC4193 sbfs022_typchar_58.gif
192k:48k
Figure 58. Pass Band Ripple