SBVS176 Data sheet

6.1 Absolute Maximum Ratings

At T_J = 25°C, unless otherwise noted. All voltages are with respect to GND.⁽¹⁾

		MIN	MAX	UNIT
Voltage	Input range, V_IN	–0.3	6	V
	Enable range, V_EN	–0.3	V_IN + 0.3
	Output range, V_OUT	–0.3	6
Current	Maximum output, I_OUT	Internally limited
Output short-circuit duration		Indefinite
Continuous total power dissipation, P_DISS		See Thermal Information
Temperature	Junction, T_J	–55	150	°C
Temperature	Storage junction, T_stg	–55	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6.2 ESD Ratings

			VALUE	UNIT
V_(ESD)	Electrostatic discharge	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾	±2000	V
V_(ESD)	Electrostatic discharge	Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾	±500	V

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating junction temperature range (unless otherwise noted)

		MIN	MAX	UNIT
V_IN	Input voltage	1.7	5.5	V
V_OUT	Output voltage	1.2	5	V
I_OUT	Output current	0	150	mA
V_EN	Enable pin voltage	0	V_IN	V
T_J	Junction temperature	–40	85	°C

6.4 Thermal Information

THERMAL METRIC		TLV717P	UNIT
		DQN (X2SON)
		4 PINS
R_θJA	Junction-to-ambient thermal resistance	393.3	°C/W
R_θJC(top)	Junction-to-case(top) thermal resistance	140.3	°C/W
R_θJB	Junction-to-board thermal resistance	330	°C/W
ψ_JT	Junction-to-top characterization parameter	6.5	°C/W
ψ_JB	Junction-to-board characterization parameter	329	°C/W
R_θJC(bot)	Junction-to-case(bottom) thermal resistance	147.5	°C/W

6.5 Electrical Characteristics

At operating temperature range (T_J = –40°C to 85°C), T_J = 25°C, V_IN = V_OUT(NOM) + 0.5 V or 1.7 V (whichever is greater), I_OUT = 10 mA, V_EN = V_IN, and C_OUT = 1 µF, unless otherwise noted.

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
V_IN	Input voltage range			1.7		5.5	V
V_OUT	Output voltage range			1.2		5	V
I_OUT	Output current			150			mA
	DC output accuracy	T_J = +25°C			0.5%
		V_OUT ≥ 1.2 V, –40°C ≤ T_J ≤ +85°C		–1.5%		1.5%
		V_OUT ≤ 1.2 V				25	mV
ΔV_O/V_IN	Line regulation	V_OUT(NOM) + 0.5 V ≤ V_IN ≤ 5.5 V			1	5	mV
ΔV_O/I_OUT	Load regulation	0 mA ≤ I_OUT ≤ 150 mA			10	20	mV
V_DO	Dropout voltage	V_IN = 0.98 × V_OUT(NOM), I_OUT = 150 mA	1.2 V ≤ V_OUT < 1.5 V		330	500	mV
			1.5 V ≤ V_OUT < 1.8 V		330	450
			1.8 V ≤ V_OUT ≤ 5 V		215	350
I_GND	Ground pin current	I_OUT = 0 mA			35	55	µA
I_SHDN	Shutdown current	V_EN ≤ 0.4 V, 2 V ≤ V_IN ≤ 4.5 V			0.1	0.5	µA
PSRR	Power-supply rejection ratio	V_IN = 3.3 V, V_OUT = 2.8 V, I_OUT = 30 mA	f = 10 Hz		70		dB
			f = 100 Hz		70
			f = 1 kHz		65
			f = 10 kHz		60
			f = 100 kHz		43
V_NOISE	Output noise voltage	BW = 100 Hz to 100 kHz, V_IN = 2.3 V, V_OUT = 1.8 V, I_OUT = 10 mA			55		µV_RMS
t_STR	Start-up time	C_OUT = 1 μF, I_OUT = 150 mA			100		µs
I_SC	Short current limit	V_IN = min (V_OUT(NOM) + 1 V, 5.5 V), V_OUT = 0 V			40		mA
V_HI	Enable high (enabled)			0.9		V_IN	V
V_LO	Enable low (disabled)			0		0.4	V
I_EN	EN pin current	EN = 5.5 V			0.01		µA
R_PULLDOWN	Pulldown resistor				120		Ω
UVLO	Undervoltage lockout	V_IN rising			1.6		V

6.6 Typical Characteristics

At operating temperature range (T_J = –40°C to 85°C), T_J = 25°C, V_IN = V_OUT(NOM) + 0.5 V or 1.7 V (whichever is greater), I_OUT = 10 mA, V_EN = V_IN, and C_OUT = 1 µF, unless otherwise noted.