JAJSUQ7B June   2024  – September 2024 TMUXS7614D

PRODUCTION DATA  

  1.   1
  2. 特長
  3. アプリケーション
  4. 概要
  5. Pin Configuration and Functions
  6. Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Thermal Information
    4. 5.4  Recommended Operating Conditions
    5. 5.5  Source or Drain Current through Switch
    6. 5.6  Electrical Characteristics (Global)
    7. 5.7  Electrical Characteristics (±15 V Dual Supply)
    8. 5.8  Switching Characteristics (±15 V Dual Supply)
    9. 5.9  Electrical Characteristics (±20 V Dual Supply)
    10. 5.10 Switching Characteristics (±20 V Dual Supply)
    11. 5.11 Electrical Characteristics (+37.5 V/–12.5 V Dual Supply)
    12. 5.12 Switching Characteristics (+37.5 V/–12.5 V Dual Supply)
    13. 5.13 Electrical Characteristics (12 V Single Supply)
    14. 5.14 Switching Characteristics (12 V Single Supply)
    15. 5.15 SPI Timing Characteristics (2.7 V to 5.5 V)
    16. 5.16 SPI Timing Characteristics (1.8 V to 2.7 V)
    17. 5.17 Timing Diagrams
    18. 5.18 Typical Characteristics
  7. Parameter Measurement Information
    1. 6.1  On-Resistance
    2. 6.2  Off-Leakage Current
    3. 6.3  On-Leakage Current
    4. 6.4  tON and tOFF Time
    5. 6.5  Break-Before-Make
    6. 6.6  Charge Injection
    7. 6.7  Off Isolation
    8. 6.8  Channel-to-Channel Crosstalk
    9. 6.9  Bandwidth
    10. 6.10 THD + Noise
  8. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Bidirectional Operation
      2. 7.3.2 Rail-to-Rail Operation
      3. 7.3.3 1.8V Logic Compatible Inputs
      4. 7.3.4 Flat On-Resistance
      5. 7.3.5 Power-Up Sequence Free
    4. 7.4 SPI Operation
      1. 7.4.1 Address Mode
      2. 7.4.2 Burst Mode
      3. 7.4.3 Daisy Chain Mode
      4. 7.4.4 Error Detection
        1. 7.4.4.1 Address R/W Error Flag
        2. 7.4.4.2 SCLK Count Error Flag
        3. 7.4.4.3 CRC (Cyclic Redundancy Check) Enable and Error Flag
        4. 7.4.4.4 Clearing Error Flags
      5. 7.4.5 Software Reset
    5. 7.5 Device Functional Modes
    6. 7.6 Register Map
  9. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
    3. 8.3 Thermal Considerations
    4. 8.4 Power Supply Recommendations
    5. 8.5 Layout
      1. 8.5.1 Layout Guidelines
      2. 8.5.2 Layout Example
  10. Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 ドキュメントの更新通知を受け取る方法
    3. 9.3 サポート・リソース
    4. 9.4 Trademarks
    5. 9.5 静電気放電に関する注意事項
    6. 9.6 用語集
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Tape and Reel Information
    2. 11.2 Mechanical Data

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ(パッケージ|ピン)
  • ZEM|30
サーマルパッド・メカニカル・データ
発注情報

Electrical Characteristics (Global)

Over operating supply voltage range, VL = 1.8V - 5.5V, GND = 0 V (unless otherwise noted) 
Typical at VDD = +15 V, VSS = –15 V, VL = 3.3V, TA = 25℃  (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP MAX UNIT
LOGIC INPUTS (SPI pins)
VIH Logic voltage high VL = 5.5 V –40°C to +125°C 2 V
VL = 3.3 V –40°C to +125°C 1.35 V
VL ≤ 1.8 V –40°C to +125°C 1 V
VIL Logic voltage low 2.7 V ≤ VL ≤ 5.5 V –40°C to +125°C 0.75 V
1.8 V ≤ VL < 2.7 V –40°C to +125°C 0.5 V
IIH Input leakage current –40°C to +125°C 0.005 2 µA
IIL Input leakage current –40°C to +125°C –2 –0.005 µA
TSD Thermal shutdown 165 °C
TSD_HYST Thermal shutdown hysteresis 15 °C
VOH Logic high output voltage ISOURCE = 100 µA –40°C to +125°C VL - 0.1 V
ISOURCE = 1 mA –40°C to +125°C VL - 0.7 V
VOL Logic low output voltage ISINK = 100 µA –40°C to +125°C 0.1 V
ISINK = 1 mA –40°C to +125°C 0.7 V
CIN Logic input capacitance –40°C to +125°C 3.5 pF
POWER SUPPLY
ILQ VL quiscent supply current VL = 1.8 V to 5.5 V
SPI Inputs = 0 V or VL
25°C 5 6 µA
–40°C to +85°C 7 µA
–40°C to +125°C 8 µA
IL VL active supply current VL = 2.7 V to 5.5 V
/CS = 0V, fSCLK = 50 MHz, fSDI = 25 MHz
25°C 1 1.2 mA
–40°C to +85°C 1.5 mA
–40°C to +125°C 2 mA