JAJSLJ0 データシート

JAJSLJ0B June 2015 – March 2021 TPS62746

PRODUCTION DATA

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）

YFP|8
- MXBG057R

サーマルパッド・メカニカル・データ

発注情報

7.5 Electrical Characteristics

V_IN = 3.6V, T_A = –40°C to 85°C typical values are at T_A = 25°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
SUPPLY
I_Q	Operating quiescent current	EN = V_IN, CTRL = GND, I_OUT = 0µA, V_OUT = 1.8V, device not switching		360	1800	nA
I_Q	Operating quiescent current	EN = V_IN, I_OUT = 0mA, CTRL = GND, V_OUT = 1.8V , device switching		460		nA
I_SD	Shutdown current	EN = GND, shutdown current into V_IN		70	1000	nA
V_{TH_}_UVLO+	Undervoltage lockout threshold	Rising V_IN		2.075	2.15	V
V_{TH_UVLO-}	Undervoltage lockout threshold	Falling V_IN		1.925	2	V
INPUTS (EN, VSEL, CTRL)
V_{IH TH}	High level input threshold	2.2V ≤ V_IN ≤ 5.5V			1.1	V
V_{IL TH}	Low level input threshold	2.2V ≤ V_IN ≤ 5.5V	0.4			V
I_IN	Input bias Current			10	25	nA
POWER SWITCHES
R_DS(ON)	High side MOSFET on-resistance	I_OUT = 50mA		0.45	1.12	Ω
R_DS(ON)	Low Side MOSFET on-resistance	I_OUT = 50mA		0.22	0.65	Ω
I_LIMF	High side MOSFET switch current limit		480	600	720	mA
	High side MOSFET switch current limit		590	650	800
	Low side MOSFET switch current limit	TPS62743		600
	Low side MOSFET switch current limit	TPS627431		650
OUTPUT VOLTAGE DISCHARGE
R_{DSCH_VOS}	MOSFET on-resistance	EN = GND, I_VOS = -10mA into VOS pin		30	65	Ω
I_{IN_VOS}	Bias current into VOS pin	EN = V_IN, V_OUT = 2V		40	1010	nA
INPUT VOLTAGE SWITCH (VINSW)
R_RDSON	MOSFET on-resistance	I_VINSW = 1mA, CTRL = V_IN, VIN = 2.1V			150	Ω
I_{INSW_LEAKAGE}	VIN-switch leakage	CTRL = GND, leakage fron VIN to VINSW when pulled to GND			25	nA
I_INSW	VIN-switch current		5		36	mA
AUTO 100% MODE TRANSITION
V_{TH_100+}	Auto 100% Mode leave detection threshold ⁽¹⁾	Rising V_IN,100% Mode is left with V_IN = V_OUT + V_{TH_100+}	150	250	350	mV
V_{TH_100-}	Auto 100% Mode enter detection threshold ⁽¹⁾	Falling V_IN, 100% Mode is entered with V_IN = V_OUT + V_{TH_100-}	85	200	290	mV
OUTPUT
I_{LIM_softstart}	High side softstart switch current limit	EN=low to high	80	150	200	mA
I_{LIM_softstart}	Low side softstart switch current limit	EN=low to high		150		mA
V_OUT	Output voltage range	Output voltages are selected with pins VSEL	1.2		1.8	V
	Output voltage accuracy	I_OUT = 10mA, V_OUT = 1.8V	-2.5	0%	2.5
	Output voltage accuracy	I_OUT = 100mA, V_OUT = 1.8V	–2	0%	2
	DC output voltage load regulation	V_OUT = 1.8V		0.001		%/mA
	DC output voltage line regulation	V_OUT = 1.8V, I_OUT = 100mA, 2.2V ≤ V_IN ≤ 5.0V		0		%/V

(1) V_IN is compared to the programmed output voltage (V_OUT). When V_IN–V_OUT falls below V_{TH_100-} the device enters 100% Mode by turning the high side MOSFET on. The 100% Mode is exited when V_IN–V_OUT exceeds V_{TH_100+} and the device starts switching. The hysteresis for the 100% Mode detection threshold V_{TH_100+} - V_{TH_100-} will always be positive and will be approximately 50 mV(typ)