SLWS181K October 2005 – December 2015 TRF3761-A , TRF3761-B , TRF3761-C , TRF3761-E , TRF3761-F , TRF3761-G , TRF3761-H , TRF3761-J
PRODUCTION DATA.
MIN | MAX | UNIT | ||
---|---|---|---|---|
Supply voltage range(2) | –0.3 | 5.5 | V | |
Digital I/O voltage range | –0.3 | VCC +0.3 | V | |
TJ | Operating virtual junction temperature range | –40 | 150 | °C |
Tstg | Storage temperature | –65 | 150 | °C |
MIN | NOM | MAX | UNIT | ||
---|---|---|---|---|---|
VCC | Power supply voltage | 4.5 | 5 | 5.25 | V |
Power supply voltage ripple | 940 | μVpp | |||
TA | Operating free air temperature range | –40 | 85 | °C | |
TJ | Operating virtual junction temperature range | –40 | 150 | °C |
THERMAL METRIC(1) | TRF3761 | UNIT | ||
---|---|---|---|---|
RHA (VQFN) | ||||
40 PINS | ||||
RθJA | Junction-to-ambient thermal resistance | Soldered slug, no airflow | 26 | °C/W |
Soldered slug, 200-LFM airflow | 20.1 | °C/W | ||
Soldered slug, 400-LFM airflow | 17.4 | °C/W | ||
RθJC(top) | Junction-to-case (top) thermal resistance | 16.4 | °C/W | |
RθJB | Junction-to-board thermal resistance | 4.7 | °C/W | |
ψJT | Junction-to-top characterization parameter | 0.2 | °C/W | |
ψJB | Junction-to-board characterization parameter | 4.6 | °C/W | |
RθJC(bot) | Junction-to-case (bottom) thermal resistance | 1 | °C/W |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1554MHz, fO = 1554MHz |
100kHz offset | –116.7 | dBc/Hz | |||
600kHz offset | –136 | ||||||
1MHz offset | -141.6 | ||||||
6MHz offset | –156.1 | ||||||
10MHz offset | -158.1 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1554MHz, fO = 777MHz |
100kHz offset | -122.8 | dBc/Hz | |||
600kHz offset | –142.7 | ||||||
1MHz offset | –147.5 | ||||||
6MHz offset | –157 | ||||||
10MHz offset | –158.1 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1554MHz, fO = 388.5MHz |
100kHz offset | –127.7 | dBc/Hz | |||
600kHz offset | -148.4 | ||||||
1MHz offset | -151.8 | ||||||
6MHz offset | –156.3 | ||||||
10MHz offset | –155.9 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 1554MHz, fO = 1554MHz |
1kHz offset | –83.4 | dBc/Hz | |||
600kHz offset | –135 | ||||||
1MHz offset | –140.2 | ||||||
10MHz offset | –158.2 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.95° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1554MHz, fO = 777MHz |
1kHz offset | –90.4 | dBc/Hz | |||
600kHz offset | –141 | ||||||
1MHz offset | –146.2 | ||||||
10MHz offset | –158.25 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.63° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1554MHz, fO = 388.5MHz |
1kHz offset | -95 | dBc/Hz | |||
600kHz offset | –147 | ||||||
1MHz offset | –151 | ||||||
10MHz offset | –156 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.39° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1651MHz, fO = 1651MHz |
100kHz offset | –119.34 | dBc/Hz | |||
600kHz offset | –139 | ||||||
1MHz offset | -142.1 | ||||||
6MHz offset | –156.6 | ||||||
10MHz offset | -158.6 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1651MHz, fO = 825.5 MHz |
100kHz offset | -127.8 | dBc/Hz | |||
600kHz offset | –146.5 | ||||||
1MHz offset | –149 | ||||||
6MHz offset | –156.2 | ||||||
10MHz offset | –158.4 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1651MHz, fO = 412.75 MHz |
100kHz offset | –127.3 | dBc/Hz | |||
600kHz offset | -151.4 | ||||||
1MHz offset | -153 | ||||||
6MHz offset | –155.5 | ||||||
10MHz offset | –155.9 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 1651MHz, fO = 1651MHz |
1kHz offset | –83.5 | dBc/Hz | |||
600kHz offset | –138 | ||||||
1MHz offset | –141.8 | ||||||
10MHz offset | –158.2 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.85° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1651MHz, fO = 825.5 MHz |
1kHz offset | –90.2 | dBc/Hz | |||
600kHz offset | –146 | ||||||
1MHz offset | –147.39 | ||||||
10MHz offset | –158.25 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.53° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1651MHz, fO = 412.75 MHz |
1kHz offset | -95.7 | dBc/Hz | |||
600kHz offset | –151 | ||||||
1MHz offset | –154 | ||||||
10MHz offset | –156 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.33° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1723MHz, fO = 1700MHz |
100kHz offset | –119.5 | dBc/Hz | |||
600kHz offset | –138.8 | ||||||
1MHz offset | -143.9 | ||||||
6MHz offset | –155.3 | ||||||
10MHz offset | –157.5 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1723MHz, fO = 861.5 MHz |
100kHz offset | –126 | dBc/Hz | |||
600kHz offset | –145.2 | ||||||
1MHz offset | –149.5 | ||||||
6MHz offset | –157.2 | ||||||
10MHz offset | –158 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1723MHz, fO = 430.75 MHz |
100kHz offset | –133 | dBc/Hz | |||
600kHz offset | -151 | ||||||
1MHz offset | -153.8 | ||||||
6MHz offset | –156 | ||||||
10MHz offset | –156.5 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 1723MHz, fO = 1723MHz, |
1kHz offset | –85 | dBc/Hz | |||
600kHz offset | –138.34 | ||||||
1MHz offset | –142.68 | ||||||
10MHz offset | –157.3 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.87° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1723MHz, fO = 861.5 MHz |
1kHz offset | –90.1 | dBc/Hz | |||
600kHz offset | –145 | ||||||
1MHz offset | –148.6 | ||||||
10MHz offset | –158 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.53° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1723MHz, fO = 430.75 MHz |
1kHz offset | –96.2 | dBc/Hz | |||
600kHz offset | –151 | ||||||
1MHz offset | –153 | ||||||
10MHz offset | –156 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.33° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1817MHz, fO = 1817MHz |
100kHz offset | –118 | dBc/Hz | |||
600kHz offset | –138.5 | ||||||
1MHz offset | -144 | ||||||
6MHz offset | –156 | ||||||
10MHz offset | –158 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1817MHz, fO = 908.5MHz |
100kHz offset | –124.8 | dBc/Hz | |||
600kHz offset | –145.2 | ||||||
1MHz offset | –148 | ||||||
6MHz offset | –157.8 | ||||||
10MHz offset | –158.2 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1817MHz, fO = 454.25MHz |
100kHz offset | –132 | dBc/Hz | |||
600kHz offset | -151 | ||||||
1MHz offset | -154 | ||||||
6MHz offset | –157 | ||||||
10MHz offset | –157.5 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (1) |
fVCO = 1817MHz, fO = 1817MHz |
1kHz offset | –85 | dBc/Hz | |||
600kHz offset | –139 | ||||||
1MHz offset | –144 | ||||||
10MHz offset | –159 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.85° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1817MHz, fO = 908.5MHz |
1kHz offset | –91 | dBc/Hz | |||
600kHz offset | –146 | ||||||
1MHz offset | –149 | ||||||
10MHz offset | –159 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.47° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1817MHz, fO = 454.25MHz |
1kHz offset | –97 | dBc/Hz | |||
600kHz offset | –151 | ||||||
1MHz offset | –154 | ||||||
10MHz offset | –157 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.34° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1869MHz, fO = 1869MHz |
100kHz offset | –118 | dBc/Hz | |||
600kHz offset | –138 | ||||||
1MHz offset | –142 | ||||||
6MHz offset | –155 | ||||||
10MHz offset | –157.3 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1869MHz, fO = 934.5MHz |
100kHz offset | –126 | dBc/Hz | |||
600kHz offset | –144 | ||||||
1MHz offset | –149 | ||||||
6MHz offset | –158 | ||||||
10MHz offset | –158.2 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1869MHz, fO = 467.25MHz |
100kHz offset | –132 | dBc/Hz | |||
600kHz offset | –150 | ||||||
1MHz offset | –154 | ||||||
6MHz offset | -157 | ||||||
10MHz offset | –157.3 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 1869MHz, fO = 1869MHz |
1kHz offset | –84.5 | dBc/Hz | |||
600kHz offset | –140 | ||||||
1MHz offset | –143.6 | ||||||
10MHz offset | –157 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.9° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1869MHz, fO = 934.5MHz |
1kHz offset | –90.7 | dBc/Hz | |||
600kHz offset | –144 | ||||||
1MHz offset | –148.5 | ||||||
10MHz offset | –158 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.53° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1869MHz, fO = 467.25MHz |
1kHz offset | –95 | dBc/Hz | |||
600kHz offset | –150 | ||||||
1MHz offset | –154 | ||||||
10MHz offset | –157 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.35° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1916MHz, fO = 1916MHz |
100kHz offset | -116 | dBc/Hz | |||
600kHz offset | -137 | ||||||
1MHz offset | -141 | ||||||
6MHz offset | -155 | ||||||
10MHz offset | -157 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1916MHz, fO = 958MHz |
100kHz offset | -113 | dBc/Hz | |||
600kHz offset | -136 | ||||||
1MHz offset | -147.5 | ||||||
6MHz offset | -155 | ||||||
10MHz offset | -157.5 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1916MHz, fO = 479MHz |
100kHz offset | -128 | dBc/Hz | |||
600kHz offset | -148 | ||||||
1MHz offset | -150 | ||||||
6MHz offset | -155 | ||||||
10MHz offset | -156 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 1916MHz, fO = 1916MHz |
1kHz offset | -82.5 | dBc/Hz | |||
600kHz offset | -136.7 | ||||||
1MHz offset | -142 | ||||||
10MHz offset | -157 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.947° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1916MHz, fO = 958MHz |
1kHz offset | -88.6 | dBc/Hz | |||
600kHz offset | -142.6 | ||||||
1MHz offset | -148.2 | ||||||
10MHz offset | -158 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.477° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1916MHz, fO = 479MHz |
1kHz offset | -95 | dBc/Hz | |||
600kHz offset | -148 | ||||||
1MHz offset | -152 | ||||||
10MHz offset | -156 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.231° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 1989MHz, fO = 1989MHz |
100kHz offset | -115 | dBc/Hz | |||
600kHz offset | -136 | ||||||
1MHz offset | -141.2 | ||||||
6MHz offset | -155.6 | ||||||
10MHz offset | -159 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 1989MHz, fO = 994.5MHz |
100kHz offset | -121.3 | dBc/Hz | |||
600kHz offset | -142.4 | ||||||
1MHz offset | -141.5 | ||||||
6MHz offset | -157.2 | ||||||
10MHz offset | -158 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 1989MHz, fO = 497.25MHz |
100kHz offset | -128 | dBc/Hz | |||
600kHz offset | -148 | ||||||
1MHz offset | -151 | ||||||
6MHz offset | -156.8 | ||||||
10MHz offset | -157 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 1989MHz, fO = 1989MHz |
1kHz offset | -83 | dBc/Hz | |||
600kHz offset | -136 | ||||||
1MHz offset | -141 | ||||||
10MHz offset | -159 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 1° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 1989MHz, fO = 994.5MHz |
1kHz offset | -88.7 | dBc/Hz | |||
600kHz offset | -141.9 | ||||||
1MHz offset | -147.5 | ||||||
10MHz offset | -158 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.509° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 1989MHz, fO = 497.25MHz |
1kHz offset | -95 | dBc/Hz | |||
600kHz offset | -147.9 | ||||||
1MHz offset | -151.3 | ||||||
10MHz offset | -156 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.252° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 2116MHz, fO = 2116MHz |
100kHz offset | –116 | dBc/Hz | |||
600kHz offset | –136 | ||||||
1MHz offset | -142 | ||||||
6MHz offset | –154.2 | ||||||
10MHz offset | –156 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 2116MHz, fO = 1058 |
100kHz offset | –123.3 | dBc/Hz | |||
600kHz offset | –143 | ||||||
1MHz offset | –147.6 | ||||||
6MHz offset | –157 | ||||||
10MHz offset | –158.3 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 2116MHz, fO = 529MHz |
100kHz offset | –129.4 | dBc/Hz | |||
600kHz offset | -149.8 | ||||||
1MHz offset | -152.7 | ||||||
6MHz offset | –157.7 | ||||||
10MHz offset | –158 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 2116MHz, fO = 2116MHz |
1kHz offset | –84 | dBc/Hz | |||
600kHz offset | –136 | ||||||
1MHz offset | –141 | ||||||
10MHz offset | –157 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 0.99° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 2116MHz, fO = 1058MHz |
1kHz offset | -89 | dBc/Hz | |||
600kHz offset | –143 | ||||||
1MHz offset | –148 | ||||||
10MHz offset | –159 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.54° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 2116MHz, fO = 529MHz |
1kHz offset | –95 | dBc/Hz | |||
600kHz offset | –149.5 | ||||||
1MHz offset | –153 | ||||||
10MHz offset | –158 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.35° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
NOISE CHARACTERISTICS | |||||||
VCO phase noise, Free running VCO direct output |
fVCO = 2289MHz, fO = 2289MHz |
100kHz offset | –116.7 | dBc/Hz | |||
600kHz offset | –135.4 | ||||||
1MHz offset | -141 | ||||||
6MHz offset | –153.8 | ||||||
10MHz offset | –156.4 | ||||||
VCO phase noise, Free running VCO divide-by-2 output |
fVCO = 2289MHz, fO = 1144.5 |
100kHz offset | –123 | dBc/Hz | |||
600kHz offset | –142 | ||||||
1MHz offset | –147 | ||||||
6MHz offset | –156.2 | ||||||
10MHz offset | –157.5 | ||||||
VCO phase noise, Free running VCO divide-by-4 output |
fVCO = 2289MHz, fO = 572.25MHz |
100kHz offset | –129 | dBc/Hz | |||
600kHz offset | -149 | ||||||
1MHz offset | -153 | ||||||
6MHz offset | –157.5 | ||||||
10MHz offset | –158 | ||||||
VCO phase noise, Closed loop phase noise direct output(1) (2) (3) |
fVCO = 2289MHz, fO = 2289MHz |
1kHz offset | –83 | dBc/Hz | |||
600kHz offset | –135 | ||||||
1MHz offset | –140 | ||||||
10MHz offset | –156 | ||||||
RMS phase error Closed loop phase noise direct output(3) |
100Hz to 10MHz | 1.1° | |||||
VCO phase noise, Closed loop phase noise divide-by-2 output(1) (2) (3) |
fVCO = 2289MHz, fO = 1144.5MHz |
1kHz offset | –89 | dBc/Hz | |||
600kHz offset | -141 | ||||||
1MHz offset | –145.7 | ||||||
10MHz offset | –158 | ||||||
RMS phase error Closed loop phase noise divide-by-2 output(3) |
100Hz to 10MHz | 0.59° | |||||
VCO phase noise, Closed loop phase noise divide-by-4 output(1) (2) (3) |
fVCO = 2289MHz, fO = 572.25MHz |
1kHz offset | –95 | dBc/Hz | |||
600kHz offset | –148 | ||||||
1MHz offset | –152 | ||||||
10MHz offset | –158.1 | ||||||
RMS phase error Closed loop phase noise divide-by-4 output(3) |
100Hz to 10MHz | 0.37° | |||||
VCO gain, Kv | VCO free running | 23 | MHz/V | ||||
Reference spur(2) | –80 | dBc |
MIN | TYP | MAX | UNIT | |||
---|---|---|---|---|---|---|
t(CLK) | Clock period | 50 | ns | |||
tsu1 | Setup time, data | 10 | ns | |||
th | Hold time, data | 10 | ns | |||
tw | Pulse width, STROBE | 20 | ns | |||
tsu2 | Setup time, STROBE | 10 | ns |