SCDS219B NOVEMBER 2005 – May 2015 TS5A3157
PRODUCTION DATA.
- 1 Features
- 2 Applications
- 3 Description
- 4 Revision History
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Electrical Characteristics for 5-V Supply
- 6.6 Electrical Characteristics for 3.3-V Supply
- 6.7 Electrical Characteristics for 2.5-V Supply
- 6.8 Electrical Characteristics for 1.8-V Supply
- 6.9 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12Device and Documentation Support
- 13Mechanical, Packaging, and Orderable Information
パッケージ・オプション
メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)(2)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V+ | Supply voltage(3) | –0.5 | 6.5 | V | |
| VNO VNC VCOM | Analog voltage(3)(4)(5) | –0.5 | V+ + 0.5 | V | |
| IK | Analog port diode current | VNC, VNO, VCOM < 0 or VNO, VNC, VCOM > V+ | –50 | 50 | mA |
| INO
INC ICOM |
On-state switch current | VNC, VNO, VCOM = 0 to V+ | –50 | 50 | mA |
| VI | Digital input voltage(3)(4) | –0.5 | 6.5 | V | |
| IIK | Digital input clamp current | VI < 0 | –50 | mA | |
| I+ | Continuous current through V+ | –100 | 100 | mA | |
| IGND | Continuous current through GND | –100 | 100 | mA | |
| Tstg | Storage temperature | –65 | 150 | °C | |
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
6.2 ESD Ratings
| VALUE | UNIT | |||
|---|---|---|---|---|
| V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | ±2000 | V |
| Charged-device model (CDM), per JEDEC specification JESD22-C101(2) | ±1000 | |||
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| VI/O | Switch input/output voltage | 0 | V+ | V |
| V+ | Supply voltage | 1.65 | 5.5 | V |
| VI | Control input voltage | 0 | 5.5 | V |
| TA | Operating temperature | –40 | 85 | °C |
6.4 Thermal Information
| THERMAL METRIC(1) | TS5A3157 | UNIT | |||
|---|---|---|---|---|---|
| DBV (SOT-23) | DCK (SC-70) | YZP (DSBGA) | |||
| 6 PINS | 6 PINS | 6 PINS | |||
| RθJA | Junction-to-ambient thermal resistance | 206 | 252 | 132 | °C/W |
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.
6.5 Electrical Characteristics for 5-V Supply
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC | Analog signal range | 0 | V+ | V | |||||
| ron | ON-state resistance |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –30 mA, |
Switch ON, see Figure 12 |
25°C | 4.5 V | 5.5 | 10 | Ω | |
| Full | 12 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 3.15 V, ICOM = –30 mA, |
Switch ON, see Figure 12 |
25°C | 4.5 V | 0.15 | 0.2 | Ω | |
| Full | 0.3 | ||||||||
| ron(flat) | ON-state resistance flatness |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –30 mA, |
Switch ON, see Figure 12 |
25°C | 4.5 V | 4 | 5 | Ω | |
| Full | 6 | ||||||||
| INO(OFF), INC(OFF) | NO, NC OFF leakage current |
VNO or VNC = 1 V, VCOM = 4.5 V, or VNO or VNC = 4.5 V, VCOM = 1 V, |
Switch OFF, see Figure 13 |
25°C | 5.5 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| INO(ON), INC(ON) |
NO, NC ON leakage current |
VNO = 1 V, VCOM = Open, or VNO = 4.5 V, VCOM = Open, |
Switch ON, see Figure 14 |
25°C | 5.5 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| ICOM(ON) | COM ON leakage current |
VCOM = 1 V, VNO or VNC = Open, or VCOM = 4.5 V, VNO or VNC = Open, |
Switch ON, see Figure 14 |
25°C | 5.5 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| Digital Control Input (IN) | |||||||||
| VIH | Input logic high | Full | V+ × 0.7 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | V+ × 0.3 | V | ||||
| IIH, IIL | Input leakage current |
VI = 5.5 V or 0 | 25°C | 5.5 V | –0.1 | 0.05 | 0.1 | µA | |
| Full | –1 | 1 | |||||||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = 3 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 5 V | 1 | 6 | 8.5 | ns |
| Full | 4.5 V to 5.5 V |
1 | 9.5 | ||||||
| tOFF | Turnoff time | VCOM = 3 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 5 V | 1 | 3.5 | 6.5 | ns |
| Full | 4.5 V to 5.5 V |
1 | 7.5 | ||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 17 |
25°C | 5 V | 1.8 | 2 | 3 | ns |
| Full | 4.5 V to 5.5 V |
1.8 | 3.5 | ||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, |
CL = 0.1 nF, see Figure 21 |
25°C | 5 V | 7 | pC | ||
| CNO(OFF), CNC(OFF) | NO, NC OFF capacitance |
VNO or VNC = V+ or GND, | Switch OFF, see Figure 15 |
25°C | 5 V | 5.5 | pF | ||
| CNO(ON), CNC(ON) | NO, NC ON capacitance |
VNO or VNC = V+ or GND, | Switch ON, see Figure 15 |
25°C | 5 V | 17.5 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 15 |
25°C | 5 V | 17.5 | pF | ||
| CI | Digital input capacitance |
VI = V+ or GND, | See Figure 15 | 25°C | 5 V | 2.8 | pF | ||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 18 |
25°C | 5 V | 300 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 10 MHz, |
Switch OFF, see Figure 19 |
25°C | 5 V | –65 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 10 MHz, |
Switch ON, see Figure 20 |
25°C | 5 V | –66 | dB | ||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, |
f = 20 Hz to 20 kHz, see Figure 22 |
25°C | 5 V | 0.01% | |||
| Supply | |||||||||
| I+ | Positive supply current |
VI = V+ or GND, | Switch ON or OFF | 25°C | 5.5 V | 2.5 | 5 | µA | |
| Full | 10 | ||||||||
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
6.6 Electrical Characteristics for 3.3-V Supply
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC | Analog signal range | 0 | V+ | V | |||||
| ron | ON-state resistance |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –24 mA, |
Switch ON, see Figure 12 |
25°C | 3 V | 12 | 20 | Ω | |
| Full | 20 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 2.1 V, ICOM = –24 mA, |
Switch ON, see Figure 12 |
25°C | 3 V | 0.2 | 0.4 | Ω | |
| Full | 0.3 | ||||||||
| ron(flat) | ON-state resistance flatness |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –24 mA, |
Switch ON, see Figure 12 |
25°C | 3 V | 9 | 11 | Ω | |
| Full | 12 | ||||||||
| INO(OFF), INC(OFF) | NO, NC OFF leakage current |
VNO or VNC = 1 V, VCOM = 3 V, or VNO or VNC = 3 V, VCOM = 1 V, |
Switch OFF, see Figure 13 |
25°C | 3.6 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| INO(ON), INC(ON) |
NO, NC ON leakage current |
VNO or VNC = 1 V, VCOM = Open, or VNO or VNC = 3 V, VCOM = Open, |
Switch ON, see Figure 14 |
25°C | 3.6 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| ICOM(ON) | COM ON leakage current |
VCOM = 1 V, VNO or VNC = Open, or VCOM = 3 V, VNO or VNC = Open, |
Switch ON, see Figure 14 |
25°C | 3.6 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| Digital Control Input (IN) | |||||||||
| VIH | Input logic high | Full | V+ × 0.7 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | V+ × 0.3 | V | ||||
| IIH, IIL | Input leakage current |
VI = 5.5 V or 0 | 25°C | 3.6 V | –0.1 | 0.05 | 0.1 | µA | |
| Full | –1 | 1 | |||||||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = 2 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 3.3 V | 3.5 | 7 | 9.5 | ns |
| Full | 3 V to 3.6 V |
1.5 | 10.5 | ||||||
| tOFF | Turnoff time | VCOM = 2 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 3.3 V | 1 | 3.5 | 6.5 | ns |
| Full | 3 V to 3.6 V |
1 | 7.5 | ||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 17 |
25°C | 3.3 V | 2.5 | 3 | 5 | ns |
| Full | 3 V to 3.6 V |
2 | 5 | ||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, |
CL = 0.1 nF, see Figure 21 |
25°C | 3.3 V | 3 | pC | ||
| CNO(OFF) | NO, NC OFF capacitance |
VNO or VNC = V+ or GND, | Switch OFF, see Figure 15 |
25°C | 3.3 V | 5.5 | pF | ||
| CNO(ON) | NO, NC ON capacitance |
VNO or VNC = V+ or GND, | Switch ON, see Figure 15 |
25°C | 3.3 V | 17.5 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 15 |
25°C | 3.3 V | 17.5 | pF | ||
| CI | Digital input capacitance |
VI = V+ or GND, | See Figure 15 | 25°C | 3.3 V | 2.8 | pF | ||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 18 |
25°C | 3.3 V | 300 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 10 MHz, |
Switch OFF, see Figure 19 |
25°C | 3.3 V | –65 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 10 MHz, |
Switch ON, see Figure 20 |
25°C | 3.3 V | –66 | dB | ||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, |
f = 20 Hz to 20 kHz, see Figure 22 |
25°C | 3.3 V | 0.015% | |||
| Supply | |||||||||
| I+ | Positive supply current | VI = V+ or GND, | Switch ON or OFF | 25°C | 3.6 V | 2.5 | 5 | µA | |
| Full | 10 | ||||||||
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
6.7 Electrical Characteristics for 2.5-V Supply
V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC | Analog signal range | 0 | V+ | V | |||||
| ron | ON-state resistance |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –8 mA, |
Switch ON, see Figure 12 |
25°C | 2.3 V | 35 | 45 | Ω | |
| Full | 50 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 1.6 V, ICOM = –8 mA, |
Switch ON, see Figure 12 |
25°C | 2.3 V | 0.3 | 0.5 | Ω | |
| Full | 0.7 | ||||||||
| ron(flat) | ON-state resistance flatness |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –8 mA, |
Switch ON, see Figure 12 |
25°C | 2.3 V | 30 | 40 | Ω | |
| Full | 40 | ||||||||
| INO(OFF), INC(OFF) |
NO, NC OFF leakage current |
VNO or VNC = 0.5 V, VCOM = 2.2 V, or VNO or VNC = 2.2 V, VCOM = 0.5 V, |
Switch OFF, see Figure 13 |
25°C | 2.7 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| INO(ON), INC(ON) |
NO, NC ON leakage current |
VNO or VNC = 0.5 V, VCOM = Open, or VNO or VNC = 2.2 V, VCOM = Open, |
Switch ON, see Figure 14 |
25°C | 2.7 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| ICOM(ON) | COM ON leakage current |
VCOM = 0.5 V, VNO or VNC = Open, or VCOM = 2.2 V, VNO or VNC = Open, |
Switch ON, see Figure 14 |
25°C | 2.7 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| Digital Control Input (IN) | |||||||||
| VIH | Input logic high | Full | V+ × 0.7 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | V+ × 0.3 | V | ||||
| IIH, IIL | Input leakage current |
VI = 5.5 V or 0 | 25°C | 2.7 V | –0.1 | 0.05 | 0.1 | µA | |
| Full | –1 | 1 | |||||||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = 1.5 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 2.5 V | 5 | 8 | 13.5 | ns |
| Full | 2.3 V to 2.7 V |
3.5 | 14 | ||||||
| tOFF | Turnoff time | VCOM = 1.5 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 2.5 V | 1 | 3.5 | 6.5 | ns |
| Full | 2.3 V to 2.7 V |
1 | 7.5 | ||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 17 |
25°C | 2.5 V | 3.5 | 5 | 7 | ns |
| Full | 2.3 V to 2.7 V |
3 | 7.5 | ||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, |
CL = 0.1 nF, see Figure 21 |
25°C | 2.5 V | 2 | pC | ||
| CNO(OFF), CNC(OFF) | NO, NC OFF capacitance |
VNO or VNC = V+ or GND, | Switch OFF, see Figure 15 |
25°C | 2.5 V | 5.5 | pF | ||
| CNO(ON), CNC(ON) | NO, NC ON capacitance |
VNO or VNC = V+ or GND, | Switch ON, see Figure 15 |
25°C | 2.5 V | 17.5 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 15 |
25°C | 2.5 V | 17.5 | pF | ||
| CI | Digital input capacitance |
VI = V+ or GND, | See Figure 15 | 25°C | 2.5 V | 2.8 | pF | ||
| BW | Bandwidth | RL = 50 Ω, Switch ON, |
See Figure 18 | 25°C | 2.5 V | 300 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 10 MHz, |
Switch OFF, see Figure 19 |
25°C | 2.5 V | –65 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 10 MHz, |
Switch ON, see Figure 20 |
25°C | 2.5 V | –66 | dB | ||
| THD | Total harmonic distortion | RL = 600 Ω, CL = 50 pF, |
f = 20 Hz to 20 kHz, see Figure 22 |
25°C | 2.5 V | 0.025% | |||
| Supply | |||||||||
| I+ | Positive supply current | VI = V+ or GND, | Switch ON or OFF | 25°C | 2.7 V | 2.5 | 5 | µA | |
| Full | 10 | ||||||||
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
6.8 Electrical Characteristics for 1.8-V Supply
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)(1)| PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|---|
| Analog Switch | |||||||||
| VCOM, VNO, VNC | Analog signal range | 0 | V+ | V | |||||
| ron | ON-state resistance |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –4 mA, |
Switch ON, see Figure 12 |
25°C | 1.65 V | 140 | 160 | Ω | |
| Full | 160 | ||||||||
| Δron | ON-state resistance match between channels |
VNO or VNC = 1.16 V, ICOM = –4 mA, |
Switch ON, see Figure 12 |
25°C | 1.65 V | 0.5 | 0.6 | Ω | |
| Full | 0.75 | ||||||||
| ron(flat) | ON-state resistance flatness |
0 ≤ (VNO or VNC) ≤ V+, ICOM = –4 mA, |
Switch ON, see Figure 12 |
25°C | 1.65 V | 125 | 130 | Ω | |
| Full | 140 | ||||||||
| INO(OFF), INC(OFF) | NO, NC OFF leakage current |
VNO or VNC = 0.3 V, VCOM = 1.65 V, or VNO or VNC = 1.65 V, VCOM = 0.3 V, |
Switch OFF, see Figure 13 |
25°C | 1.95 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| INO(ON), INC(ON) | NO, NC ON leakage current |
VNO or VNC = 0.3 V, VCOM = Open, or VNO or VNC = 1.65 V, VCOM = Open, |
Switch ON, see Figure 14 |
25°C | 1.95 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| ICOM(ON) | COM ON leakage current |
VCOM = 0.3 V, VNO or VNC = Open, or VCOM = 1.65 V, VNO or VNC = Open, |
Switch ON, see Figure 14 |
25°C | 1.95 V | –0.1 | 0.05 | 0.1 | µA |
| Full | –0.2 | 0.1 | 0.2 | ||||||
| Digital Control Input (IN) | |||||||||
| VIH | Input logic high | Full | V+ × 0.65 | 5.5 | V | ||||
| VIL | Input logic low | Full | 0 | V+ × 0.35 | V | ||||
| IIH, IIL | Input leakage current |
VI = 5.5 V or 0 | 25°C | 1.95 V | –0.1 | 0.05 | 0.1 | µA | |
| Full | –1 | 1 | |||||||
| Dynamic | |||||||||
| tON | Turnon time | VCOM = 1.3 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 1.8 V | 5 | 15 | 23 | ns |
| Full | 1.65 V to 1.95 V |
7 | 24 | ||||||
| tOFF | Turnoff time | VCOM = 1.3 V, RL = 300 Ω, |
CL = 35 pF, see Figure 16 |
25°C | 1.8 V | 1 | 3.5 | 6.5 | ns |
| Full | 1.65 V to 1.95 V |
1 | 7.5 | ||||||
| tBBM | Break-before-make time | VNC = VNO = V+ / 2, RL = 50 Ω, |
CL = 35 pF, see Figure 17 |
25°C | 1.8 V | 5.5 | 7.5 | 9 | ns |
| Full | 1.65 V to 1.95 V |
5.2 | 12 | ||||||
| QC | Charge injection | VGEN = 0, RGEN = 0, |
CL = 0.1 nF, see Figure 21 |
25°C | 1.8 V | 1 | pC | ||
| CNO(OFF), CNC(OFF) | NO, NC OFF capacitance |
VNO or VNC = V+ or GND, | Switch OFF, see Figure 15 |
25°C | 1.8 V | 5.5 | pF | ||
| CNO(ON), CNC(ON) | NO, NC ON capacitance |
VNO or VNC = V+ or GND, | Switch ON, see Figure 15 |
25°C | 1.8 V | 17.5 | pF | ||
| CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, | Switch ON, see Figure 15 |
25°C | 1.8 V | 17.5 | pF | ||
| CI | Digital input capacitance |
VI = V+ or GND, | See Figure 15 | 25°C | 1.8 V | 2.8 | pF | ||
| BW | Bandwidth | RL = 50 Ω, | Switch ON, see Figure 18 |
25°C | 1.8 V | 300 | MHz | ||
| OISO | OFF isolation | RL = 50 Ω, f = 10 MHz, |
Switch OFF, see Figure 19 |
25°C | 1.8 V | –65 | dB | ||
| XTALK | Crosstalk | RL = 50 Ω, f = 10 MHz, |
Switch ON, see Figure 20 |
25°C | 1.8 V | –66 | dB | ||
| THD | Total harmonic distortion | RL = 10 kΩ, CL = 50 pF, |
f = 20 Hz to 20 kHz, see Figure 22 |
25°C | 1.8 V | 0.015% | |||
| Supply | |||||||||
| I+ | Positive supply current | VI = V+ or GND, | Switch ON or OFF | 25°C | 1.95 V | 2.5 | 5 | µA | |
| Full | 10 | ||||||||
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
6.9 Typical Characteristics
