SCDS203B DECEMBER   2005  – March 2019 TS5A63157

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
    1.     Device Images
      1.      Block Diagram
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Minimum and Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics for 5-V Supply
    6. 6.6 Electrical Characteristics for 3.3-V Supply
    7. 6.7 Electrical Characteristics for 2.5-V Supply
    8. 6.8 Electrical Characteristics for 1.8-V Supply
    9. 6.9 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Integrated Overshoot and Undershoot Protection Circuitry
      2. 8.3.2 Isolation in Powered-Off Mode, V+ = 0 V
      3. 8.3.3 Break-before-make
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Receiving Notification of Documentation Updates
    2. 12.2 Community Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.8 Electrical Characteristics for 1.8-V Supply

V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT
Analog Switch
Analog signal range VCOM, VNO,
VNC 		0 V+ V
Voltage undershoot VIKU 0 ≥ (INC, INO, or ICOM) ≥  –50 mA 1.95 V V
Peak ON-state resistance rpeak 0 ≤ (VNO or VNC) ≤ V+,
ICOM = –4 mA,		 Switch ON,
See Figure 13 		25°C 1.65 V 13.8 60 Ω
Full 120
ON-state resistance ron VNO or VNC = 0,
ICOM = 4 mA		 Switch ON,
See Figure 13 		25°C 1.65 V 5.9 15 Ω
Full 15
VNO or VNC = 1.65 V,
ICOM = –4 mA		 25°C 12.8 40
Full 45
ON-state resistance match between channels Δron VNO or VNC = 1.15 V,
ICOM = –4 mA,		 Switch ON,
See Figure 13 		25°C 1.65 V 0.1 0.5 Ω
Full 0.8
ON-state resistance flatness ron(flat) 0 ≤ (VNO or VNC) ≤ V+,
ICOM = –4 mA,		 Switch ON,
See Figure 13 		25°C 1.65 V 26.5 60 Ω
Full 80
NC, NO
OFF leakage current		 INC(OFF),
INO(OFF) 		VNC or VNO = 0 to V+,
VCOM = V+ to 0, 		Switch OFF,
See Figure 14 		25°C 1.95 V 0 0.03 μA
Full 0.05
INC(PWROFF),
INOPWROFF) 		VNC or VNO = 0 to 1.95 V,
VCOM = 1.95 V to 0,		 Switch OFF,
See Figure 14 		25°C 0 0.15 0.50
Full 0.75
COM
OFF leakage current		 ICOM(PWROFF) VCOM = 0 to 1.95 V,
VNC or VNO = 1.95 V to 0,		 Switch ON,
See Figure 14 		25°C 0 0.2 0.5 μA
Full 1
NC, NO
ON leakage current		 INC(ON),
INO(ON) 		VNC or VNO = 0 to V+,
VCOM = Open,		 Switch ON,
See Figure 15 		25°C 1.95 V 0.001 0.01 μA
Full 0.02
COM
ON leakage current		 ICOM(ON) VNC or VNO = Open,
VCOM = 0 to V+,		 Switch ON,
See Figure 15 		25°C 1.95 V 0.003 0.03 μA
Full 0.05
Digital Control Input (IN)
Input logic high VIH Full V+
× 0.75		 5.5 V
Input logic low VIL Full 0 V+
× 0.25		 V
Input leakage current IIH, IIL VI = 5.5 V or 0 25°C 1.95 V 0.005 0.01 μA
Full 0.02
Dynamic
Turn-on time tON VCOM = V+ or GND,
RL = 500 Ω,		 CL = 50 pF,
See Figure 17 		25°C 1.8 V 9.5 23 ns
Full 1.65 V to
1.95 V		 24
Turn-off time tOFF VCOM = V+ or GND,
RL = 500 Ω,		 CL = 50 pF,
See Figure 17 		25°C 1.8 V 5.9 10 ns
Full 1.65 V to
1.95 V		 12
Output voltage during undershoot VOUTU See Figure 18 2.5 VOH
– 0.3		 V
Output voltage during overshoot VOUTO See Figure 18 VOL
+ 0.3		 2 V
Break-before-make time tBBM VNC = VNO = V+/2,
RL = 50 Ω,		 CL = 50 pF,
See Figure 19 		25°C 1.8 V 0.5 18 50 ns
Full 1.65 V to
1.95 V		 0.5 55
Charge injection QC VGEN = 0,
RGEN = 0,		 CL = 0.1 nF,
See Figure 23 		25°C 1.8 V –5 pC
NC, NO
OFF capacitance		 CNC(OFF),
CNO(OFF) 		VNC or VNO = V+ or GND,
Switch OFF,		 See Figure 16 25°C 1.8 V 5.5 pF
NC, NO
ON capacitance		 CNC(ON),
CNO(ON) 		VNC or VNO = V+ or GND,
Switch ON,		 See Figure 16 25°C 1.8 V 15.5 pF
COM
ON capacitance		 CCOM(ON) VCOM = V+ or GND,
Switch ON,		 See Figure 16 25°C 1.8 V 15.5 pF
Digital input capacitance CI VI = V+ or GND, See Figure 16 25°C 1.8 V 2.5 pF
Bandwidth BW RL = 50 Ω,
Switch ON,		 See Figure 20 25°C 1.8 V 369 MHz
OFF isolation OISO RL = 50 Ω,
f = 10 MHz,		 Switch OFF,
See Figure 21 		25°C 1.8 V –60 dB
Crosstalk XTALK RL = 50 Ω,
f = 10 MHz,		 Switch ON,
See Figure 22 		25°C 1.8 V –60 dB
Total harmonic distortion THD RL = 600 Ω,
CL = 50 pF,		 f = 20 Hz to 20 kHz,
See Figure 24 		25°C 1.8 V 0.4%
Supply
Positive supply current I+ VI = V+ or GND, Switch ON or OFF 25°C 1.95 V 0.05 0.06 μA
Full 0.3