JAJSIC0 データシート

JAJSIC0J November 2009 – July 2021 TUSB1210

PRODUCTION DATA

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）

RHB|32
- MPQF130D

サーマルパッド・メカニカル・データ

RHB|32
- QFND029X

発注情報

7.4.1 TUSB1210 Modes vs ULPI Pin Status

Table 7-1, Table 7-2, and Table 7-3 show the status of each of the 12 ULPI pins including input or output direction and whether output pins are driven to ‘0’ or to ‘1’, or pulled up or pulled down through the internal pullup or pulldown resistors.

Note that pullup or pulldown resistors are automatically replaced by driven ‘1’/’0’ levels respectively once internal IORST is released, with the exception of the pullup on STP which is maintained in all modes.

Pin assignment changes in ULPI 3-pin serial mode, ULPI 6-pin serial mode, and UART mode. Unused pins are tied low in these modes as shown below.

Table 7-1 TUSB1210 Modes vs ULPI Pin Status:ULPI Synchronous Mode Power-Up

		ULPI SYNCHRONOUS MODE POWER-UP
		UNTIL IORST RELEASE		PLL OFF		PLL ON + STP HIGH		PLL ON + STP LOW
PIN NO.	PIN NAME	DIR	PU/PD	DIR	PU/PD	DIR	PU/PD	DIR	PU/PD
26	CLOCK	Hiz	PD	I	PD	IO	—	IO	—
31	DIR	Hiz	PU	O, (‘1’)	—	O, (‘0’)	—	O	—
2	NXT	Hiz	PD	O, (‘0’)	—	O, (‘0’)	—	O	—
29	STP	Hiz	PU	I	PU	I	PU	I	PU
3	DATA0	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
4	DATA1	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
5	DATA2	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
6	DATA3	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
7	DATA4	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
9	DATA5	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
10	DATA6	Hiz	PD	O, (‘0’)	—	I	PD	IO	—
13	DATA7	Hiz	PD	O, (‘0’)	—	I	PD	IO	—

Table 7-2 TUSB1210 Modes vs ULPI Pin Status: USB Suspend Mode

		SUSPEND MODE		LINK / EXTERNAL RECOMMENDED SETTING DURING SUSPEND MODE
PIN NO.	PIN NAME	DIR	PU/PD	DIR	PU/PD
26	CLOCK	I	—	O	—
31	DIR	O, (‘1’)	—	I	—
2	NXT	O, (‘0’)	—	I	—
29	STP	I	PU⁽¹⁾	O, (‘0’)	—
3	DATA0	O, (LINESTATE0)	—	I	—
4	DATA1	O, (LINESTATE1)	—	I	—
5	DATA2	O, (‘0’)	—	I	—
6	DATA3	O, (INT)	—	I	—
7	DATA4	O, (‘0’)	—	I	—
9	DATA5	O, (‘0’)	—	I	—
10	DATA6	O, (‘0’)	—	I	—
13	DATA7	O, (‘0’)	—	I	—

(1) Can be disabled by software before entering Suspend Mode to reduce current consumption

Table 7-3 TUSB1210 Modes vs ULPI Pin Status: ULPI 6-Pin Serial Mode and UART Mode

	ULPI 6-PIN SERIAL MODE			ULPI 3-PIN SERIAL MODE			UART MODE
PIN NO.	PIN NAME	DIR	PU/PD	PIN NAME	DIR	PU/PD	PIN NAME	DIR	PU/PD
26	CLOCK (1)	IO	—	CLOCK (1)	IO	—	CLOCK (1)	IO	—
31	DIR	O	—	DIR	O	—	DIR	O	—
2	NXT	O	—	NXT	O	—	NXT	O	—
29	STP	I	PU	STP	I	PU	STP	I	PU
3	TX_ENABLE	I	—	TX_ENABLE	I	—	TXD	I	—
4	TX_DAT	I	—	DAT	IO	—	RXD	IO	—
5	TX_SE0	I	—	SE0	IO	—	tie low	O	—
6	INT	O	—	INT	O	—	INT	O	—
7	RX_DP	O	—	tie low	O	—	tie low	O	—
9	RX_DM	O	—	tie low	O	—	tie low	O	—
10	RX_RCV	O	—	tie low	O	—	tie low	O	—
13	tie low	O	—	tie low	O	—	tie low	O	—