JAJSUV7C July   2015  – July 2024 TUSB4041I-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 3.3-V I/O Electrical Characteristics
    6. 5.6 Power-Up Timing Requirements
    7. 5.7 Hub Input Supply Current
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Battery Charging Features
      2. 6.3.2 USB Power Management
      3. 6.3.3 One-Time Programmable Configuration
      4. 6.3.4 Clock Generation
      5. 6.3.5 Crystal Requirements
      6. 6.3.6 Input Clock Requirements
      7. 6.3.7 Power-Up and Reset
    4. 6.4 Device Functional Modes
      1. 6.4.1 External Configuration Interface
      2. 6.4.2 I2C EEPROM Operation
      3. 6.4.3 SMBus Target Operation
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Upstream Port Implementation
        2. 7.2.2.2 Downstream Port 1 Implementation
        3. 7.2.2.3 Downstream Port 2 Implementation
        4. 7.2.2.4 Downstream Port 3 Implementation
        5. 7.2.2.5 Downstream Port 4 Implementation
        6. 7.2.2.6 VBUS Power Switch Implementation
        7. 7.2.2.7 Clock, Reset, and Miscellaneous
        8. 7.2.2.8 TUSB4041I-Q1 Power Implementation
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
      1. 7.3.1 TUSB4041I-Q1 Power Supply
      2. 7.3.2 Downstream Port Power
      3. 7.3.3 Ground
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Placement
        2. 7.4.1.2 Package Specific
        3. 7.4.1.3 Differential Pairs
      2. 7.4.2 Layout Example
  9. 8 Register Maps
    1. 8.1  Configuration Registers
    2. 8.2  ROM Signature Register
    3. 8.3  Vendor ID LSB Register
    4. 8.4  Vendor ID MSB Register
    5. 8.5  Product ID LSB Register
    6. 8.6  Product ID MSB Register
    7. 8.7  Device Configuration Register
    8. 8.8  Battery Charging Support Register
    9. 8.9  Device Removable Configuration Register
    10. 8.10 Port Used Configuration Register
    11. 8.11 Device Configuration Register 2
    12. 8.12 USB 2.0 Port Polarity Control Register
    13. 8.13 UUID Byte N Register
    14. 8.14 Language ID LSB Register
    15. 8.15 Language ID MSB Register
    16. 8.16 Serial Number String Length Register
    17. 8.17 Manufacturer String Length Register
    18. 8.18 Product String Length Register
    19. 8.19 Serial Number String Registers
    20. 8.20 Manufacturer String Registers
    21. 8.21 Product String Byte N Register
    22. 8.22 Additional Feature Configuration Register
    23. 8.23 Device Status and Command Register
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 ドキュメントの更新通知を受け取る方法
    3. 9.3 サポート・リソース
    4. 9.4 Trademarks
    5. 9.5 静電気放電に関する注意事項
    6. 9.6 用語集
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.4.2 I2C EEPROM Operation

The TUSB4041I-Q1 device supports a single-controller, standard mode (100 kb/s) connection to a dedicated I2C EEPROM when the I2C interface mode is enabled. In I2C mode, the TUSB4041I-Q1 device reads the contents of the EEPROM at bus address 1010000b using 7-bit addressing starting at address 0.

If the value of the EEPROM contents at byte 00h equals 55h, the TUSB4041I-Q1 device loads the configuration registers according to the EEPROM map. If the first byte is not 55h, the TUSB4041I-Q1 device exits the I2C mode and continues execution with the default values in the configuration registers. The hub does not connect on the upstream port until the configuration is completed. If the hub detected an unprogrammed EEPROM (value other than 55h), the hub enters programming mode and a programming endpoint within the hub is enabled.

Note:

The bytes located above offset Ah are optional. The requirement for data in those addresses is dependent on the options configured in the Device Configuration Register and Device Configuration Register 2.

For details on I2C operation, refer to the UM10204 I2C-bus Specification and User Manual.