JAJSUV7C July   2015  – July 2024 TUSB4041I-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 3.3-V I/O Electrical Characteristics
    6. 5.6 Power-Up Timing Requirements
    7. 5.7 Hub Input Supply Current
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Battery Charging Features
      2. 6.3.2 USB Power Management
      3. 6.3.3 One-Time Programmable Configuration
      4. 6.3.4 Clock Generation
      5. 6.3.5 Crystal Requirements
      6. 6.3.6 Input Clock Requirements
      7. 6.3.7 Power-Up and Reset
    4. 6.4 Device Functional Modes
      1. 6.4.1 External Configuration Interface
      2. 6.4.2 I2C EEPROM Operation
      3. 6.4.3 SMBus Target Operation
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Upstream Port Implementation
        2. 7.2.2.2 Downstream Port 1 Implementation
        3. 7.2.2.3 Downstream Port 2 Implementation
        4. 7.2.2.4 Downstream Port 3 Implementation
        5. 7.2.2.5 Downstream Port 4 Implementation
        6. 7.2.2.6 VBUS Power Switch Implementation
        7. 7.2.2.7 Clock, Reset, and Miscellaneous
        8. 7.2.2.8 TUSB4041I-Q1 Power Implementation
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
      1. 7.3.1 TUSB4041I-Q1 Power Supply
      2. 7.3.2 Downstream Port Power
      3. 7.3.3 Ground
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Placement
        2. 7.4.1.2 Package Specific
        3. 7.4.1.3 Differential Pairs
      2. 7.4.2 Layout Example
  9. 8 Register Maps
    1. 8.1  Configuration Registers
    2. 8.2  ROM Signature Register
    3. 8.3  Vendor ID LSB Register
    4. 8.4  Vendor ID MSB Register
    5. 8.5  Product ID LSB Register
    6. 8.6  Product ID MSB Register
    7. 8.7  Device Configuration Register
    8. 8.8  Battery Charging Support Register
    9. 8.9  Device Removable Configuration Register
    10. 8.10 Port Used Configuration Register
    11. 8.11 Device Configuration Register 2
    12. 8.12 USB 2.0 Port Polarity Control Register
    13. 8.13 UUID Byte N Register
    14. 8.14 Language ID LSB Register
    15. 8.15 Language ID MSB Register
    16. 8.16 Serial Number String Length Register
    17. 8.17 Manufacturer String Length Register
    18. 8.18 Product String Length Register
    19. 8.19 Serial Number String Registers
    20. 8.20 Manufacturer String Registers
    21. 8.21 Product String Byte N Register
    22. 8.22 Additional Feature Configuration Register
    23. 8.23 Device Status and Command Register
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 ドキュメントの更新通知を受け取る方法
    3. 9.3 サポート・リソース
    4. 9.4 Trademarks
    5. 9.5 静電気放電に関する注意事項
    6. 9.6 用語集
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

8.23 Device Status and Command Register

Offset = F8h

Figure 8-22 Device Status and Command Register
76543210
RSVDsmbusRstcfgActive
R-0W1S-0W1C-0
Table 8-23 Device Status and Command Register Field Descriptions
BitFieldTypeResetDescription
7:2RSVDR0

Reserved

Read only, returns 0 when read

1smbusRstW1S0

SMBus interface reset

This bit loads the registers back to the GRSTz values.

This bit is set by writing a 1 and is cleared by hardware on completion of the reset. A write of 0 has no effect.

0cfgActiveW1C0

Configuration active

This bit indicates that configuration of the TUSB4041I-Q1 device is currently active. The bit is set by hardware when the device enters the I2C or SMBus mode. The TUSB4041I-Q1 device does not connect on the upstream port while this bit is 1.

When in the SMBus mode, this bit must be cleared by the SMBus host to exit the configuration mode and allow the upstream port to connect.

The bit is cleared by a writing 1. A write of 0 has no effect.