JAJSOL5B april   2023  – august 2023 UCC27301A-Q1

ADVANCE INFORMATION  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Revision History
  6. 5 概要 (続き)
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Input Stages and Cross-Conduction Protection
      2. 8.3.2 Enable
      3. 8.3.3 Undervoltage Lockout (UVLO)
      4. 8.3.4 Level Shifter
      5. 8.3.5 Boot Diode
      6. 8.3.6 Output Stages
      7. 8.3.7 Negative Voltage Transients
    4. 8.4 Device Functional Modes
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Input Threshold Type
        2. 9.2.2.2 VDD Bias Supply Voltage
        3. 9.2.2.3 Peak Source and Sink Currents
        4. 9.2.2.4 Propagation Delay
        5. 9.2.2.5 Power Dissipation
  11. 10Power Supply Recommendations
  12. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Thermal Considerations
  13. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 サード・パーティ製品に関する免責事項
    2. 12.2 Documentation Support
      1. 12.2.1 Related Documentation
    3. 12.3 ドキュメントの更新通知を受け取る方法
    4. 12.4 サポート・リソース
    5. 12.5 Trademarks
    6. 12.6 静電気放電に関する注意事項
    7. 12.7 用語集
  14. 13Mechanical, Packaging, and Orderable Information
    1. 13.1 Package Option Addendum
      1.      54
    2. 13.2 Tape and Reel Information
    3. 13.3 Mechanical Data

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • DRC|10
  • DDA|8
サーマルパッド・メカニカル・データ

7.5 Electrical Characteristics

VDD = VHB =12 V, VHS = VSS = 0 V, No load on LO or HO, TA = TJ = –40°C to +150°C (unless otherwise noted).
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY CURRENTS
IDD VDD quiescent current VLI = VHI = 0, VEN = 3V 0.05 0.085 0.17 mA
IDDO VDD operating current  f = 500 kHz, CLOAD = 0, VEN = 3V 2.1 2.5 6.5 mA
IHB Boot voltage quiescent current VLI = VHI = 0 V, VEN = 3V 0.015 0.065 0.1 mA
IHBO Boot voltage operating current f = 500 kHz, CLOAD = 0, VEN = 3V 1.5 2.5 5.1 mA
IHBS HB to VSS quiescent current VHS = VHB = 105 V, VEN = 3V 0.0005 1 μA
IHBSO HB to VSS operating current f = 500 kHz, CLOAD = 0, VEN = 3V 0.07 1.2 mA
IDD_DIS Driver Current when EN pin is pulled low (Disabled) UCC27301AQDRCRQ1 only, VEN = 0 7 μA
INPUT
VHIT_HI Input voltage high threshold  1.7 2.3 2.55 V
VHIT_LI Input voltage high threshold  1.7 2.3 2.55 V
VLIT_HI Input voltage low threshold  1.2 1.6 1.9 V
VLIT_LI Input voltage low threshold  1.2 1.6 1.9 V
VIHYS  HI Input voltage Hysteresis 0.7 V
VIHYS  LI Input voltage Hysteresis  0.7 V
RIN_HI Input pulldown resistance  VIN = 3V 68 kΩ
RIN_LI Input pulldown resistance  VIN = 3V 68 kΩ
ENABLE
VEN Voltage threshold on EN pin to enable the driver UCC27301AQDRCRQ1 only 1.7 2.3 2.55 V
VDIS Voltage threshold on EN pin to disable the driver UCC27301AQDRCRQ1 only 1.2 1.6 1.9 V
VENHYS Enable pin Hysteresis UCC27301AQDRCRQ1 only 0.7 V
REN EN pin internal pull-down resistance UCC27301AQDRCRQ1 only, VEN = 3V 80 kΩ
TEN EN pin response time UCC27301AQDRCRQ1 only, VEN = 3V 18 70 μs
TDIS EN pin response time UCC27301AQDRCRQ1 only, VEN = 0V 1.5 10 μs
UNDERVOLTAGE PROTECTION (UVLO)
VDDR VDD rising threshold 6.2 7 7.8 V
VDDHYS VDD threshold hysteresis 0.5 V
VHBR VHB rising threshold 5.6 6.7 7.9 V
VHBHYS VHB threshold hysteresis 1.1 V
BOOTSTRAP DIODE
VF Low-current forward voltage I VDD - HB = 100 μA 0.65 0.85 V
VFI High-current forward voltage I VDD - HB = 100 mA 0.9 1.05 V
RD Dynamic resistance, ΔVF/ΔI I VDD - HB = 160 mA and 180 mA 0.3 0.5 0.85 Ω
LO GATE DRIVER
VLOL Low level output voltage ILO = 100 mA 0.1 0.19 V
VLOH High level output voltage ILO = -100 mA, VLOH = VDD – VLO 0.16 0.29 V
Peak pullup current(1) VLO = 0 V 3.7 A
Peak pulldown current(1) VLO = 12 V 4.5 A
HO GATE DRIVER
VHOL Low level output voltage IHO = 100 mA 0.1 0.19 V
VHOH High level output voltage IHO = –100 mA, VHOH = VHB- VHO 0.16 0.29 V
Peak pullup current(1) VHO = 0 V 3.7 A
Peak pulldown current(1) VHO = 12 V 4.5 A
(1) Parameter not tested in production.