JAJSDH4I June 2017 – March 2024 UCC5310 , UCC5320 , UCC5350 , UCC5390
PRODUCTION DATA
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
---|---|---|---|---|---|---|
SUPPLY CURRENTS | ||||||
IVCC1 | Input supply quiescent current | 1.67 | 2.4 | mA | ||
IVCC2 | Output supply quiescent current | 1.1 | 1.8 | mA | ||
SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDS | ||||||
VIT+(UVLO1) | VCC1 Positive-going UVLO threshold voltage | 2.6 | 2.8 | V | ||
VIT– (UVLO1) | VCC1 Negative-going UVLO threshold voltage | 2.4 | 2.5 | V | ||
Vhys(UVLO1) | VCC1 UVLO threshold hysteresis | 0.1 | V | |||
UCC5310MC, UCC5320SC,UCC5320EC,UCC5390SC,UCC5390EC, and UCC5350MC UVLO THRESHOLDS (12-V UVLO Version) | ||||||
VIT+(UVLO2) | VCC2 Positive-going UVLO threshold voltage | 12 | 13 | V | ||
VIT–(UVLO2) | VCC2 Negative-going UVLO threshold voltage | 10.3 | 11 | V | ||
Vhys(UVLO2) | VCC2 UVLO threshold voltage hysteresis | 1 | V | |||
UCC5350SB UVLO THRESHOLD (8-V UVLO Version) | ||||||
VIT+(UVLO2) | VCC2 Positive-going UVLO threshold voltage | 8.7 | 9.4 | V | ||
VIT–(UVLO2) | VCC2 Negative-going UVLO threshold voltage | 7.3 | 8.0 | V | ||
Vhys(UVLO2) | VCC2 UVLO threshold voltage hysteresis | 0.7 | V | |||
LOGIC I/O | ||||||
VIT+(IN) | Positive-going input threshold voltage (IN+, IN–) | 0.55 × VCC1 | 0.7 × VCC1 | V | ||
VIT–(IN) | Negative-going input threshold voltage (IN+, IN–) | 0.3 × VCC1 | 0.45 × VCC1 | V | ||
Vhys(IN) | Input hysteresis voltage (IN+, IN–) | 0.1 × VCC1 | V | |||
IIH | High-level input leakage at IN+ | IN+ = VCC1 | 40 | 240 | µA | |
IIL | Low-level input leakage at IN– | IN– = GND1 | –240 | –40 | µA | |
IN– = GND1 – 5 V | –310 | –80 | ||||
GATE DRIVER STAGE | ||||||
VOH | High-level output voltage (VCC2 - OUT) and (VCC2 - OUTH) | IOUT = –20 mA | 100 | 240 | mV | |
VOL | Low level output voltage (OUT and OUTL) | UCC5320SC and UCC5320EC, IN+ = low, IN– = high; IO = 20 mA | 9.4 | 13 | mV | |
UCC5310MC, IN+ = low, IN– = high; IO = 20 mA | 17 | 26 | ||||
UCC5390SC and UCC5390EC, IN+ = low, IN– = high; IO = 20 mA | 2 | 3 | ||||
UCC5350MC and UCC5350SB, IN+ = low, IN– = high; IO = 20 mA | 5 | 7 | ||||
IOH | Peak source current | UCC5320SC and UCC5320EC, IN+ = high, IN– = low | 2.4 | 4.3 | A | |
UCC5310MC, IN+ = high, IN– = low | 2.4 | 4.3 | ||||
UCC5390SC and UCC5390EC, IN+ = high, IN– = low | 10 | 17 | ||||
UCC5350MC, IN+ = high, IN– = low | 5 | 10 | ||||
UCC5350SB IN+ = high, IN– = low | 5 | 8.5 | ||||
IOL | Peak sink current | UCC5320SC and UCC5320EC, IN+ = low, IN– = high | 2.2 | 4.4 | A | |
UCC5310MC, IN+ = low, IN– = high | 1.1 | 2.2 | ||||
UCC5390SC and UCC5390EC, IN+ = low, IN– = high | 10 | 17 | ||||
UCC5350MC, IN+ = low, IN– = high | 5 | 10 | ||||
UCC5350SB IN+ = low, IN– = high | 5 | 10 | ||||
ACTIVE MILLER CLAMP (UCC53xxM only) | ||||||
VCLAMP | Low-level clamp voltage | UCC5310MC, ICLAMP = 20 mA | 26 | 50 | mV | |
UCC5350MC, ICLAMP = 20 mA | 7 | 10 | ||||
ICLAMP | Clamp low-level current | UCC5310MC, VCLAMP = VEE2 + 15 V | 1.1 | 2.2 | A | |
UCC5350MC, VCLAMP = VEE2 + 15 V | 5 | 10 | ||||
ICLAMP(L) | Clamp low-level current for low output voltage | UCC5310MC, VCLAMP = VEE2 + 2 V | 0.7 | 1.5 | A | |
UCC5350MC, VCLAMP = VEE2 + 2 V | 5 | 10 | ||||
VCLAMP-TH | Clamp threshold voltage | UCC5310MC and UCC5350MC | 2.1 | 2.3 | V | |
SHORT CIRCUIT CLAMPING | ||||||
VCLP-OUT | Clamping voltage (VOUTH – VCC2 or VOUT –VCC2) | IN+ = high, IN– = low, tCLAMP = 10 µs, IOUTH or IOUT= 500 mA | 1 | 1.3 | V | |
VCLP-OUT | Clamping voltage (VEE2 – VOUTL or VEE2 – VCLAMP or VEE2 – VOUT) | IN+ = low, IN– = high, tCLAMP = 10 µs, ICLAMP or IOUTL = –500 mA | 1.5 | V | ||
IN+ = low, IN– = high, ICLAMP or IOUTL = –20 mA | 0.9 | 1 | ||||
ACTIVE PULLDOWN | ||||||
VOUTSD | Active pulldown voltage on OUTL, CLAMP, OUT | IOUTL or IOUT = 0.1 × IOUTL(typ), VCC2 = open | 1.8 | 2.5 | V |