DLPU034C June   2015  – November 2016 DLP4710 , DLPA3005

 

  1.   DLP LightCrafter Display 4710 EVM User’s Guide
    1.     Trademarks
    2. 1 Safety Instructions
    3. 2 What is in the LightCrafter Display 4710 EVM
    4. 3 Light Engine
    5. 4 Quick-Start Procedure
    6. 5 Connectors, Headers, and Switch Description
    7. 6 EVM Setup
    8. 7 Applicable Documents
  2.   Revision History

5 Connectors, Headers, and Switch Description

Table 3. List of Installed Connectors on the 4710 EVM Board

INSTALLED CONNECTORS/HEADERS DESCRIPTION
J_PEDID Header to program the EDID
JRST Header to set DLPC3439 in RESET
J_RED Connector for RED LED cable
J_GRN Connector for GREEN LED cable
J_BLU Connector for BLUE LED cable
J_DEV Connector for the I2C interface (DevaSys box)
J_FAN1,J_FAN2,J_FAN3,J_FAN4 Connector for 12-V DC power
J_FLEX Connector for flex cable
J_HDMI Connector for Mini_HDMI input
J_MSPJTAG MSP430 JTAG programming interface connector
J_MSPONOFF Projector ON/OFF switch
SW1 Push-button to request I2C
J_WPC Unsupported
J_TMP Unsupported
J_LABB Unsupported
J_3DG Unsupported