JAJSEU6A February 2018 – June 2018 OPT3101
PRODUCTION DATA.
PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
---|---|---|---|---|---|---|
AFE | ||||||
Iref | Full-scale signal current at fmod | 200 | nA | |||
Inoise | AFE input-referred current noise | 1.5(1) | pA/√Hz | |||
IambMax | Maximum ambient dc current at input | AVDD3 = 3.3 V | 200 (2) | µA | ||
µ1000Hz | Ambient attenuation at 1000 Hz | 60 | dB | |||
VR | Bias voltage at INM, INP | 1 | V | |||
Cin | Maximum external photodiode capacitance at input | 6 | pF | |||
fmod | Modulation frequency | 10 | MHz | |||
sps | Sample rate | 4000 | Hz | |||
tPU,Deepsleep | Deep sleep recovery time | Monoshot mode only | 1 | ms | ||
tPU,Standby | Standby recovery time (3) | 50 | µs | |||
ILLUMINATION DRIVER | ||||||
IDRV | Maximum built-in illumination driver current | 173.6 | mA | |||
POWER (ACTIVE MODE AT MAXIMUM FRAME RATE) | ||||||
IAVDD | 1.8-V analog supply current | 11.6 | mA | |||
IDVDD | 1.8-V digital supply current | 5.7 | mA | |||
IAVDD3 | 3.3-V analog supply current | 0.5 | mA | |||
IIOVDD | 3.3-V I/O supply current | 0.7 | mA | |||
POWER (DEEP SLEEP MODE) | ||||||
IAVDD | 1.8-V analog supply current | 1 | µA | |||
IDVDD | 1.8-V digital supply current | 3 | µA | |||
IAVDD3 | 3.3-V analog supply current | 1 | µA | |||
IIOVDD | 3.3-V I/O current | 2 | µA | |||
POWER (ACTIVE MODE AT MAXIMUM FRAME RATE), INTERNAL LDO MODE | ||||||
IAVDD3 | 3.3-V analog supply current | Internal LDO mode | 17.9 | mA | ||
IIOVDD | 3.3-V I/O supply current | Internal LDO mode | 0.7 | mA | ||
POWER (DEEP SLEEP MODE), INTERNAL LDO MODE | ||||||
IAVDD3 | 3.3-V analog supply current | Internal LDO mode | 80 | µA | ||
IIOVDD | 3.3-V I/O supply current | Internal LDO mode | 2 | µA | ||
CMOS I/Os | ||||||
VIH | Input high-level threshold | 0.7 × VCC | V | |||
VIL | Input low-level threshold | 0.3 × VCC | V | |||
VOH | Output high level | IOH = –2 mA | VCC(4) – 0.45 | V | ||
IOH = –8 mA | VCC(4) – 0.5 | |||||
VOL | Output low level | IOL = 2 mA | 0.35 | V | ||
IOL = 8 mA | 0.65 | |||||
II | Input pin leakage current | Pins with pullup, pulldown resistor | ±50 | µA | ||
Pins without pullup, pulldown resistor | ±10 | |||||
CI | Input capacitance | 5 | pF | |||
IOH | Maximum output current high level | 10 | mA | |||
IOL | Maximum output current low level | 10 | mA |