JAJSKH4A April   2022  – May 2024 TUSB1104

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4.   概要
  5. 3 Pin Configuration and Functions
  6. 4 Specifications
    1. 4.1  Absolute Maximum Ratings
    2. 4.2  ESD Ratings
    3. 4.3  Recommended Operating Conditions
    4. 4.4  Thermal Information
    5. 4.5  Power Supply Characteristics
    6. 4.6  Control I/O DC Electrical Characteristics
    7. 4.7  USB Electrical Characteristics
    8. 4.8  Timing Requirements
    9. 4.9  Switching Characteristics
    10. 4.10 Typical Characteristics
  7. 5 Parameter Measurement Information
  8. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 4-Level Inputs
      2. 6.3.2 USB Receiver Linear Equalization
        1. 6.3.2.1 Linear EQ Configuration
        2. 6.3.2.2 Full Adaptive Equalization
        3. 6.3.2.3 Fast Adaptive Equalization
      3. 6.3.3 USB Transmitter
        1. 6.3.3.1 Linearity VOD
        2. 6.3.3.2 Limited VOD
        3. 6.3.3.3 Transmit Equalization (Limited Redriver Mode Only)
      4. 6.3.4 USB 3.2 x2 Description
      5. 6.3.5 USB Polarity Inversion
      6. 6.3.6 Receiver Detect Control
    4. 6.4 Device Functional Modes
      1. 6.4.1 MODE Pin
      2. 6.4.2 Rx EQ Configuration in Pin-Strap Mode
      3. 6.4.3 USB 3.2 Power States
      4. 6.4.4 Disabling U1 and U2
    5. 6.5 Programming
      1. 6.5.1 Pseudocode Examples
        1. 6.5.1.1 Fixed EQ with Linear Redriver Mode
        2. 6.5.1.2 Fixed EQ with Limited Redriver Mode
        3. 6.5.1.3 Fast AEQ with Linear Redriver Mode
        4. 6.5.1.4 Fast AEQ with Limited Redriver Mode
        5. 6.5.1.5 Full AEQ with Linear Redriver Mode
        6. 6.5.1.6 Full AEQ with Limited Redriver Mode
      2. 6.5.2 TUSB1104 I2C Address Options
      3. 6.5.3 TUSB1104 I2C Target Behavior
    6. 6.6 Register Map
      1. 6.6.1 Device Registers
  9. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 USB SSTX1/2 Receiver Configuration
        2. 7.2.2.2 USB CRX1/2 Receiver Configuration
          1. 7.2.2.2.1 Fixed Equalization
          2. 7.2.2.2.2 Full Adaptive Equalization
          3. 7.2.2.2.3 Fast Adaptive Equalization
        3. 7.2.2.3 ESD Protection
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  10. 8 Device and Documentation Support
    1. 8.1 ドキュメントの更新通知を受け取る方法
    2. 8.2 サポート・リソース
    3. 8.3 Trademarks
    4. 8.4 静電気放電に関する注意事項
    5. 8.5 用語集
  11. 9 Revision History
  12. 10Mechanical, Packaging, and Orderable Information

4.10 Typical Characteristics

TUSB1104 USB CRX1 EQ Settings Curves at 85 Ω (from simulation)
Figure 4-1 USB CRX1 EQ Settings Curves
at 85 Ω (from simulation)
TUSB1104 CRX1 Input Return Loss Performance at 85 Ω (from simulation)
Figure 4-3 CRX1 Input Return Loss Performance
at 85 Ω (from simulation)
TUSB1104 USB SSRX1 VOD Linearity Settings at 20 MHz and EQ = 0
A.
Figure 4-5 USB SSRX1 VOD Linearity Settings
at 20 MHz and EQ = 0
TUSB1104 USB CTX1 VOD Linearity Settings at 20 MHz and EQ = 0
A.
Figure 4-7 USB CTX1 VOD Linearity Settings
at 20 MHz and EQ = 0
TUSB1104 USB SSTX1 EQ Settings Curves at 85 Ω (from simulation)
Figure 4-2 USB SSTX1 EQ Settings Curves
at 85 Ω (from simulation)
TUSB1104 CTX1 Output Return Loss Performance at 85 Ω (from simulation)
Figure 4-4 CTX1 Output Return Loss Performance
at 85 Ω (from simulation)
TUSB1104 USB SSRX1 VOD Linearity Settings at 5 GHz and EQ = 0
A.
Figure 4-6 USB SSRX1 VOD Linearity Settings
at 5 GHz and EQ = 0
TUSB1104 USB CTX1 VOD Linearity Settings at 5 GHz and EQ = 0
A.
Figure 4-8 USB CTX1 VOD Linearity Settings
at 5 GHz and EQ = 0