SBAU432 December   2023 AFE7728D , AFE7768D , AFE7769D

 

  1.   Abstract
  2.   2
  3.   Trademarks
  4. 1Introduction
  5. 2Basic EVM Test Procedures
    1. 2.1 Safety
    2. 2.2 Quality
    3. 2.3 Apparel
    4. 2.4 Hardware and Software Requirements
      1. 2.4.1 Test Equipment Required
      2. 2.4.2 Software Required
  6. 3AFE7769DEVM Setup
    1. 3.1 AFE7769D Hardware Changes
    2. 3.2 AFE7769D Connections
    3. 3.3 AFE7769D Software Setup
    4. 3.4 AFE7769D Programming Method 1: Automated
    5. 3.5 AFE7769D Programming Method 2: Using GUI Mode

3.1 AFE7769D Hardware Changes

Make the following changes to the AFE7769DEVM to separate the SYNCOUT pins as shown in Figure 3-1.

GUID-20230731-SS0I-F5HL-F41Q-4PTHBSFNCB3N-low.png Figure 3-1 Separating the SYNCOUT Pins

In conjunction to the schematic, see Table 3-1 for the list of switches to make.

Table 3-1 List of Pin Changes, AFE7769DEVM
AFE Reference Designator Change From Change To
R16 0 Ω DNI
R19 0 Ω DNI
R3 0 Ω DNI
R5 0 Ω DNI
R1 DNI 0 Ω
R2 DNI 0 Ω
R21 DNI 0 Ω
R22 DNI 0 Ω