SBAU443 November   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 System Overview
    2. 2.2 Hardware Overview
      1. 2.2.1 AC-MB Settings
        1. 2.2.1.1 Audio Serial Interface Settings
          1. 2.2.1.1.1 USB
          2. 2.2.1.1.2 18
          3. 2.2.1.1.3 Optical or Auxiliary Analog Audio Input
          4. 2.2.1.1.4 External
        2. 2.2.1.2 AC-MB Power Supply
      2. 2.2.2 PCMx140Q1EVM-PDK Hardware Settings
        1. 2.2.2.1 Line Inputs
        2. 2.2.2.2 Onboard Microphone Input
  9. 3Software
    1. 3.1 Software Overview
      1. 3.1.1 PurePath Console 3 Installation
      2. 3.1.2 PCMx140Q1EVM GUI Installation
        1. 3.1.2.1 Software Setup
    2. 3.2 Quick Start
      1. 3.2.1 Configuring the Audio Serial Bus for the I2S Output
      2. 3.2.2 32
      3. 3.2.3 Saving a Configuration
    3. 3.3 Matlab Audio Capture Example
  10. 4Hardware Design Files
    1. 4.1 PCMx140Q1EVM-PDK Schematic and Bill of Materials
      1. 4.1.1 PCMx140Q1EVM-PDK Schematic
      2. 4.1.2 PCB Layouts
      3. 4.1.3 PCMx140Q1EVM-PDK Bill of Materials
    2. 4.2 AC-MB Schematic and Bill of Materials
      1. 4.2.1 AC-MB Schematic
      2. 4.2.2 PCB Layouts
      3. 4.2.3 AC-MB Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation

2.2.2.2 Onboard Microphone Input

For the onboard microphone input configuration (shown in Figure 3-10), the PCMx140Q1 records the audio captured from the microphones located on the bottom edge of the board. MICBIAS is used to power the onboard microphone, so header J14 must be shorted. There must not be any connections to J1 during onboard microphone use to preserve the performance of the microphone.

GUID-A049C180-2326-4170-B80D-7949FB97049C-low.gifFigure 2-10 PCMx140Q1EVM Connection for the Onboard Microphone Test