SLAU723A October 2017 – October 2018 MSP432E401Y , MSP432E411Y
GPTM Timer A Interval Load (GPTMTAILR)
When the timer is counting down, this register is used to load the starting count value into the timer. When the timer is counting up, this register sets the upper bound for the timeout event.
When a GPTM is configured to one of the 32-bit modes, GPTMTAILR appears as a 32-bit register (the upper 16-bits correspond to the contents of the GPTM Timer B Interval Load (GPTMTBILR) register). In a 16-bit mode, the upper 16 bits of this register read as 0s and have no effect on the state of GPTMTBILR.
GPTMTAILR is shown in Figure 18-18 and described in Table 18-21.
Return to Summary Table.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| TAILR | |||||||||||||||||||||||||||||||
| R/W-0xFFFFFFFF | |||||||||||||||||||||||||||||||