SLAU892A March   2023  – June 2024 AFE11612-SEP

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Electrostatic Discharge Caution
      2. 2.1.2 Power Configurations and Jumper Settings
      3. 2.1.3 Connecting the Hardware
    2. 2.2 Hardware Description
      1. 2.2.1 Theory of Operation
        1. 2.2.1.1 Signal Definitions
  7. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Operating Systems
      2. 3.1.2 Software Installation
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
          1. 3.2.2.1.1 DACs Subpage
          2. 3.2.2.1.2 ADCs Subpage
          3. 3.2.2.1.3 Alarms Subpage
          4. 3.2.2.1.4 GPIO + Temp Subpage
        2. 3.2.2.2 Low Level Configuration Page
  8. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6Related Documentation from Texas Instruments
  11. 7Revision History

3.2.2.2 Low Level Configuration Page

Figure 4-10 shows the Low Level Configuration page. This page allows access to low-level communication directly with the respective device registers. Select a register on the Register Map list to show a description of the values in that register, as well as information on the register address, default value, size, and current value. Data are written to the registers by entering a value in the value column of the GUI.

AFE11612EVM Low Level Configuration Page Figure 3-10 Low Level Configuration Page

To store the values of the register map locally, select Save Configuration under the File drop-down menu. The stored configuration files can be recalled and loaded by selecting Open Configuration.

Figure 4-11 shows the four configuration buttons provided on the Low Level Configuration page that allow the user to read from and write to the device registers:

  • Write Selected
  • Write Modified
  • Read Selected
  • Read All
AFE11612EVM Low Level Configuration Page Options Figure 3-11 Low Level Configuration Page Options

By default, Immediate Update Mode is selected for the Low Level Configuration page write operations. The Write Modified button is enabled only when the Update Mode is set to Deferred. In this mode, a write operation is initiated only when the Write Selected or Write Modified buttons are pressed.