SLAU916 May   2024

 

  1.   1
  2.   Description
  3.   Getting Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Hardware Theory of Operation
      2. 2.1.2 Jumper Definitions
      3. 2.1.3 Connector Definitions
      4. 2.1.4 Test Points
    2. 2.2 Hardware Overview
      1. 2.2.1 Connecting the FT4232 Digital Controller
      2. 2.2.2 SPI Configuration
      3. 2.2.3 I2C Configuration
      4. 2.2.4 Glitch Testing
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Software Installation
    2. 3.2 Software Overview
      1. 3.2.1 Launching the Software
    3. 3.3 Software Features
      1. 3.3.1 Low Level Configuration Page
      2. 3.3.2 High Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation

3.3.1 Low Level Configuration Page

Figure 4-7 shows the Low Level Configuration page of the DAC805xxEVM GUI. This page allows direct access to all registers on the DAC80516.

The Register Map section in the center of the page lists all the registers. Directly above the Register Map section are four buttons that allow for read and write access to all registers.

Select a register on the Register Map list to show a description of the values in that register, as well as information on the register address, default value, size, and current value. Data are written to the registers by entering a value in the value column of the GUI.

DAC80516EVM DAC80516 Low Level Configuration Page Figure 3-7 DAC80516 Low Level Configuration Page