SLAU942 July   2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Hardware Theory of Operation
      2. 2.1.2 Jumper Definitions
      3. 2.1.3 Connector Definitions
      4. 2.1.4 Test Points
    2. 2.2 Hardware Overview
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Connecting the FT4232 Digital Controller
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Software Installation
    2. 3.2 Software Overview
      1. 3.2.1 Launching the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 Low Level Configuration Page
        2. 3.2.2.2 High Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation

2.1.4 Test Points

The DAC81416-08EVM has test points available for measuring and debugging purposes. Table 3-5 lists the description of each test point.

Table 2-5 DAC81416-08EVM Test Points
Test PointNetDescription
TP1VDDDAC81416 VDD supply
TP2VCCDAC81416 VCC supply
TP3VSSDAC81416 VSS supply
TP4VIODAC81416 VIO supply
TP5GNDDedicated ground test point for measuring DAC glitch
TP6OUT0Dedicated OUT0 test point for measuring DAC glitch
TP7TEMPOUTTEMPOUT test point
TP8REFREF test point
TP9, TP10, TP11, TP12GNDGround test point
TP133.3VOn-board 3.3V supply
TP141.8VOn-board 1.8V supply
TP15TRIGFT4232 Trigger output