SLAU947 October   2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Overview
    2. 2.2 Power Requirements
    3. 2.3 XDS110 Debug Probe
    4. 2.4 Measure Current Draw of the MSPM0G3519
    5. 2.5 Clocking
    6. 2.6 BoosterPack Plug-in Module Pinout
  9. 3Software
    1. 3.1 Software Development Options
    2. 3.2 Out-of-Box GUI
    3. 3.3 CCS Cloud
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Compliance Information
    1. 5.1 Compliance and Certifications
  12. 6Additional Information
    1. 6.1 Trademarks
  13. 7Related Documentation
    1. 7.1 Supplemental Content

2.3 XDS110 Debug Probe

LP-MSPM0G3519 features an onboard debug probe to streamline prototyping. The debugger used on this LaunchPad is the XDS110 variant, which supports all MSPM0 device derivatives. The integrated XDS110 debug probe is separated from the rest of the MSPM0G3519 circuitry, which is shown by the dashed silkscreen on the LaunchPad. The XDS110 is only connected through signals that pass through J101, in addition to a common ground.

Isolation Jumper Block

The isolation jumper block J101 allows the user to connect or disconnect signals that cross from the XDS110 domain into the MSPM0G3519 target domain. This includes XDS110 SWD signals, application UART signals, 3.3V and 5V power, and reset.

Jumper

Description

5V

5V rail from the USB

3V3

3.3V rail from the LDO

RXD<<

Backchannel UART: The target MSPM0G3519 receives data through this signal. The arrows indicate the direction of the signal.

TXD>>

Backchannel UART: The target MSPM0G3519 sends data through this signal. The arrows indicate the direction of the signal.

NRST

Reset signal

SWDIO

Serial Wire Debug: SWDIO data signal.

SWCLK

Serial wire debug: SWCLK clock signal.

BSL

Invoke pin for bootstrap loader. Allows the XDS110 to invoke BSL.