SLLU313A May   2019  – February 2022 TLIN1021-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Description
  3. 2EVM Setup and Requirements
    1. 2.1 Commander Mode
    2. 2.2 Responder Mode
    3. 2.3 Push-button Wake
  4. 3Schematic and Bill of Materials
  5. 4Revision History

2.1 Commander Mode

To configure the board for commander mode, place a shunt on J7 to connect the external 1-kΩ resistor and series diode to the LIN bus per the LIN specification.