SLLU388 November   2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1  Power Requirements
    2. 2.2  Setup
      1. 2.2.1 Power Management Setup
      2. 2.2.2 Transceiver Options
      3. 2.2.3 Special Use Pin Options
      4. 2.2.4 Potential Board Modifications
    3. 2.3  Header, Jumper, and other Interface Information
    4. 2.4  Switch Information
    5. 2.5  Resistor Information
    6. 2.6  Inductance Information
    7. 2.7  Capacitor Information
    8. 2.8  Diode Information
    9. 2.9  Transistor Information
    10. 2.10 IC and Misc. Component Information
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 Software Installation
    3. 3.3 Software Development
    4. 3.4 Programming Options
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
    2. 5.2 Related Documentation

2.10 IC and Misc. Component Information

Component ID Component GPN Function Comment Installed

U1

TCAN28475

Main EVM SBC

Footprint compatible with all other TCAN284XX and TCAN285XX IC’s

Yes

U2

MSP430F5529

External MCU

Not Needed For TCAN28 testing

Yes

U3

TPS7B8650

Additional 5V LDO

Used to drive LEDs and provide pull-up voltage to SW pin

Yes

U4

SN74LVC1G07

Buffer for LED Driving

Only Used for Driving LEDs

Yes

U5

SN74LVC1G07

Buffer for LED Driving

Only Used for Driving LEDs

Yes

U6

SN74LVC1G07

Buffer for LED Driving

Only Used for Driving LEDs

Yes

U9

TPS2553

USB to 5V LDO

U2 Power Rail

Yes

U10

TPS2553

USB to 3.3V LDO

U2 Power Rail

Yes

Y1

ABM11-24.000MHZ-D2X-T3

25MHz clock for U2

N/A

Yes