SLPA021 November   2024 CSD13303W1015 , CSD16301Q2 , CSD16321Q5 , CSD16322Q5 , CSD16323Q3 , CSD16325Q5 , CSD16327Q3 , CSD16340Q3 , CSD16342Q5A , CSD16401Q5 , CSD16403Q5A , CSD16404Q5A , CSD16406Q3 , CSD16407Q5 , CSD16408Q5 , CSD16409Q3 , CSD16410Q5A , CSD16411Q3 , CSD16412Q5A , CSD16413Q5A , CSD16414Q5 , CSD16415Q5 , CSD16556Q5B , CSD17301Q5A , CSD17302Q5A , CSD17303Q5 , CSD17304Q3 , CSD17305Q5A , CSD17306Q5A , CSD17307Q5A , CSD17308Q3 , CSD17309Q3 , CSD17310Q5A , CSD17311Q5 , CSD17312Q5 , CSD17313Q2 , CSD17322Q5A , CSD17327Q5A , CSD17381F4 , CSD17501Q5A , CSD17505Q5A , CSD17506Q5A , CSD17507Q5A , CSD17510Q5A , CSD17522Q5A , CSD17527Q5A , CSD17551Q3A , CSD17551Q5A , CSD17552Q3A , CSD17552Q5A , CSD17553Q5A , CSD17555Q5A , CSD17556Q5B , CSD17559Q5 , CSD18501Q5A , CSD18502KCS , CSD18502Q5B , CSD18503KCS , CSD18503Q5A , CSD18504KCS , CSD18504Q5A , CSD18531Q5A , CSD18532KCS , CSD18532NQ5B , CSD18532Q5B , CSD18533KCS , CSD18533Q5A , CSD18534KCS , CSD18534Q5A , CSD18537NKCS , CSD18537NQ5A , CSD18563Q5A , CSD22202W15 , CSD25211W1015 , CSD25213W10 , CSD75207W15 , CSD86311W1723 , CSD86330Q3D , CSD86350Q5D , CSD86360Q5D , CSD87312Q3E , CSD87330Q3D , CSD87331Q3D , CSD87350Q5D , CSD87351Q5D , CSD87351ZQ5D , CSD87352Q5D , CSD87353Q5D , CSD87381P , CSD87588N

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Review the Data Sheet Limits
  6. 3Application-specific FETs
  7. 4Gate Drive Voltage Specifications
    1. 4.1 Absolute maximum VGS
    2. 4.2 Gate-to-source Threshold Voltage, VGS(th)
  8. 5High-side and Low-side Switches
    1. 5.1 Driving a High-side N-channel FET
    2. 5.2 Driving a Low-side N-channel FET
    3. 5.3 Driving a High-side P-channel FET
  9. 6Use a Gate-to-source Resistor
  10. 7Lowest RDS(on)≠ Lowest Power Loss
  11. 8Summary
  12. 9References

1 Introduction

To assist the designer, TI has published a series of technical articles, application notes and tools for selecting and using MOSFETs: MOSFET Support and Training Tools application note. Once the FET has been chosen, there is more work to do to make sure the FET works as expected in the application.