SLUUCJ6 November   2023

 

  1.   1
  2.   BQ76907 Evaluation Module
  3.   Trademarks
  4. 1Features
    1. 1.1 Kit Contents
    2. 1.2 Ordering Information
    3. 1.3 BQ76907 Circuit Module Performance Specification Summary
    4. 1.4 Required Equipment
  5. 2BQ76907 EVM Quick Start Guide
    1. 2.1 Before You Begin
    2. 2.2 Quick Start
  6. 3Battery Management Studio Software
    1. 3.1 System Requirements
    2. 3.2 Installing BQStudio
    3. 3.3 BQ76907 bqz File Installation
    4. 3.4 BQStudio Operation and Registers View
    5. 3.5 Commands
    6. 3.6 Data Memory
      1. 3.6.1 Entering, Saving, and Loading Configuration
    7. 3.7 Command Sequences
  7. 4BQ76907 Circuit Module Use
    1. 4.1 Cell Simulator
    2. 4.2 Evaluating with Load Current
    3. 4.3 Evaluating Charge and Discharge Currents
    4. 4.4 Evaluating with Simulated Current
    5. 4.5 Reducing the Cell Count
    6. 4.6 Connecting Cells
    7. 4.7 Connecting to a Host
    8. 4.8 Hardware Configuration
      1. 4.8.1 Configuration Jumpers
    9. 4.9 Configuration Register Programming
  8. 5BQ76907EVM Circuit Module Physical Construction
    1. 5.1 Board Layout
    2. 5.2 Bill of Materials
    3. 5.3 Schematic

4.2 Evaluating with Load Current

With the BQ76907 configured and the FETs enabled discharge current can be demonstrated by attaching suitable resistors or a DC load at the PACK terminals as shown in Figure 4-1.

GUID-20220718-SS0I-DR2V-VPT5-LPJ2NSF0VMNC-low.svg Figure 4-1 Evaluating with Load Current