SLVSE46A November 2017 – January 2018
PRODUCTION DATA.
Figure 238 shows a typical application circuit suitable for driving a GOA/GIP LCD panel. The circuit is designed to operate from a single-cell Li-ion battery or a regulated 3.3 V supply and requires VGH and VGL1/VGL2 from an external source. Table 214 shows the stuffing options for R060, R061 and R062.
Capacitor C1 is only needed if the OTP of the TPS65680 device is programmed in the application circuit. If the device is programmed before being soldered to the PCB, you do not need this capacitor.