SLVUAB2A September   2014  – July 2021 TPS563209

 

  1.   Trademarks
  2. 1Introduction
  3. 2Performance Specification Summary
  4. 3Modifications
    1. 3.1 Output Voltage Setpoint
  5. 4Test Setup and Results
    1. 4.1  Input/Output Connections
    2. 4.2  Start-Up Procedure
    3. 4.3  Efficiency
    4. 4.4  Load Regulation
    5. 4.5  Line Regulation
    6. 4.6  Load Transient Response
    7. 4.7  Output Voltage Ripple
    8. 4.8  Input Voltage Ripple
    9. 4.9  Start-Up
    10. 4.10 Shut-Down
  6. 5Board Layout
    1. 5.1 Layout
  7. 6Schematic, Bill of Materials, and Reference
    1. 6.1 Schematic
    2. 6.2 Bill of Materials
    3. 6.3 Reference
  8. 7Revision History

4.10 Shut-Down

The TPS563209EVM-652 shut-down waveform relative to VIN is shown in Figure 4-12. Load = 1 Ω resistive.

GUID-C4744094-C6CE-4471-BA63-75CE8C0B888C-low.gifFigure 4-12 TPS563209EVM-652 Shut-Down Relative to VIN

The TPS563209EVM-652 shut-down waveform relative to EN is shown in Figure 4-13. Load = 1 Ω resistive.

GUID-7A7FFA22-FBC2-49FE-BB42-DFC00D5A42FF-low.gifFigure 4-13 TPS563209EVM-652 Shut-Down Relative to EN