SLVUB62B June 2017 – November 2020
The I2C address setting must match the configuration generated by the TPS65988 configuration tool. Table 5-5 summarizes the I2C address settings. To adjust the dead battery boot behavior, the setting on ADCIN1 can be adjusted. Table 5-6 summarizes the ADCIN1 settings. The specific settings for each divider ratio is discussed in the TPS65988 datasheet.
Switch | On, Off | Bits | Divider Ratio |
---|---|---|---|
1-3 | Off | 000b | 0.00 |
1 | On | 001b | 0.34 |
2 | On | 010b | 0.50 |
3 | On | 011b | 0.90 |
Switch | On, Off | Bits | Divider Ratio |
---|---|---|---|
4-6 | Off | 000b | 0.00 |
4 | On | 001b | 0.34 |
5 | On | 010b | 0.50 |
6 | On | 011b | 0.90 |