SLVUCO4 October   2023 TPS62916

 

  1.   1
  2.   TPS62916EVM Evaluation Module
  3.   Trademarks
  4. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modifications
      1. 1.2.1 Input and Output Capacitors
      2. 1.2.2 Configurable Enable Threshold Voltage
      3. 1.2.3 NR/SS Capacitor
      4. 1.2.4 Feedforward Capacitor
      5. 1.2.5 S-CONF Resistor
      6. 1.2.6 Loop Response Measurement
      7. 1.2.7 Single LC Filter Operation
  5. 2Setup
    1. 2.1 Input and Output Connector Descriptions
    2. 2.2 Ripple Measurement Setup
  6. 3 Test Results
  7. 4 Board Layout
  8. 5Schematic and Bill of Materials
    1. 5.1 Schematic
  9. 6Bill of Materials

4 Board Layout

This section provides the EVM board layout and illustrations in Figure 4-1 through Figure 4-5. The Gerbers are available on the EVM product page.

GUID-DFF28F11-29E6-422B-9042-C6CB9FD543CA-low.svgFigure 4-1 Top Assembly.
GUID-3117157C-4243-4202-9766-1F777592BB24-low.svgFigure 4-2 Top Layer.

GUID-34614220-7AFB-49BD-9404-42B5EE0F02AC-low.svgFigure 4-3 Internal Layer 1 .
GUID-4DF2662D-6923-47C6-9A62-108DB75E7C22-low.svgFigure 4-4 Internal Layer 2.

GUID-0D6B895E-20E8-4269-A563-E55809A9EDA7-low.svgFigure 4-5 Bottom Layer (Mirrored).