SLVUCU6A November   2023  – October 2024

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Getting Started
    2. 2.2 EVM Details
      1. 2.2.1 Terminal Blocks
      2. 2.2.2 Test Point Descriptions
      3. 2.2.3 Configuration Headers
      4. 2.2.4 Connectors
      5. 2.2.5 Dip Switches
      6. 2.2.6 EVM Control and GPIO
    3. 2.3 Customization
      1. 2.3.1 Changing the Communication Interface
      2. 2.3.2 Changing the Phase Configuration
  9. 3Software
    1. 3.1 GUI Tool
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks
  12. 6Related Documentation
  13. 7Revision History

1.3 Specification

The EVM is equipped with TPS6522430-Q1 which is designed to provide the power and functionality needed by Texas Instruments AM62P Sitara™ processor. A typical Power Distribution Network (PDN) is shown in Figure 1-1, which utilizes the TPS6522430-Q1 to power the AM62P.

The voltages and current output capabilities of the TPS6522430-Q1 are shown in Table 1-1. These output voltages are enabled when a proper supply is given to the TPS6522430-Q1 and VSENSE is connected to VCCA by a jumper. For all jumper options, please refer to Section 2.2.3.

Table 1-1 TPS6522430-Q1 Rails
Rail Voltage Current capability
VCCA 3.3 V -
BUCK1+BUCK2 0.75 V 10 A
BUCK3 1.8 V 2 A
BUCK4 1.2 V 2 A
LDO1 1.8 V 300 mA
LDO2 3.3 V 400 mA
LDO3 0.85 V 400 mA
VSENSE 3.3 V -
TPS65224Q1EVM Typical AM62P PDN Using TPS6522430-Q1 Figure 1-1 Typical AM62P PDN Using TPS6522430-Q1