SNAU246A June   2020  – January 2021 LMX2820

 

  1. 1Trademarks
  2. 2LMX2820EVM Evaluation Module
    1. 2.1 Evaluation Module Contents
    2. 2.2 Evaluation Setup Requirement
    3. 2.3 Resources
  3. 3Setup
    1. 3.1 Connection Diagram
    2. 3.2 Power Supply
    3. 3.3 Reference Clock
    4. 3.4 RF Output
    5. 3.5 Programming
    6. 3.6 Evaluation Software
  4. 4Typical Measurement
    1. 4.1 Default Configuration
      1. 4.1.1 Loop Filter
      2. 4.1.2 Typical Output
    2. 4.2 Additional Tests
      1. 4.2.1 SYSREF Example
      2. 4.2.2 Offset Mixing With PFDIN Pin
      3. 4.2.3 External VCO Mode
      4. 4.2.4 Register Readback
  5. 5Schematic
  6. 6PCB Layout and Layer Stack-Up
    1. 6.1 PCB Layer Stack-Up
    2. 6.2 PCB Layout
  7. 7Bill of Materials
  8. 8Troubleshooting Guide
    1.     A Using Different Reference Clock
      1.      B USB2ANY Firmware Upgrade
        1.       C Revision History

C Revision History

Changes from Revision * (June 2020) to Revision A (January 2021)

  • Updated the numbering format for tables, figures, and cross-references throughout the document. Updated the operating frequency range.Go
  • Updated graphics and added description to the ReadMe page to the Evaluation Software section.Go
  • Updated graphic in SYSREF Example section.Go
  • Updated graphic and changed external PFD mode to offset mixing with PFDIN pin in the Offset Mixing With PFDIN Pin sectionGo
  • Updated graphic in External VCO Mode sectionGo