SNAU303A May   2024  – September 2024

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Device Information
  7. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 Default Configuration of the LMH1239EVM
      2. 2.1.2 Hardware and Software: Description and Setup
        1. 2.1.2.1 SDI_IN1 Selected
        2. 2.1.2.2 SMBus/I2C Secondary Mode Configuration for the LMH1239EVM GUI
        3. 2.1.2.3 High Level Page for the LMH1239EVM GUI
        4. 2.1.2.4 Eye Monitor for the LMH1239EVM GUI
          1. 2.1.2.4.1 Register Map for the LMH1239EVM GUI
        5. 2.1.2.5 Scripting for the LMH1239EVM GUI
  8. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials (BOM)
  9. 4Additional Information
    1. 4.1 Trademarks
  10. 5Related Documentation
  11. 6Revision History

2.1.1 Default Configuration of the LMH1239EVM

The default configuration for the LMH1239EVM has SDI_IN enabled while SDI_OUT and OUT1 are disabled. Figure 2-2 shows the labeled outputs and default pin shunt configuration.

LMH1239EVM LMH1239 EVM Inputs, Outputs and Default Pin Shunt Configurations Figure 2-2 LMH1239 EVM Inputs, Outputs and Default Pin Shunt Configurations