SNVA853C December   2019  – March 2024 LMZ10500 , LMZ10501 , LMZ20501 , LMZ20502 , LMZ21700 , LMZ21701 , LMZ30604 , LMZ31506 , LMZ31520 , LMZ31530 , LMZ31704 , LMZ31707 , LMZ31710 , LMZ34202 , LMZ35003 , LMZ36002 , LMZM23600 , LMZM23601 , LMZM33602 , LMZM33603 , LMZM33604 , LMZM33606 , TLVM13610 , TLVM13630 , TLVM13640 , TLVM13660 , TLVM23615 , TLVM23625 , TPS82085 , TPS82130 , TPSM265R1 , TPSM33615 , TPSM33625 , TPSM365R3 , TPSM365R6 , TPSM53604 , TPSM5601R5 , TPSM5601R5H , TPSM5601R5HE , TPSM560R6 , TPSM63603 , TPSM63604 , TPSM63606 , TPSM63608 , TPSM63610 , TPSM84424 , TPSM84624 , TPSM846C23 , TPSM846C24 , TPSM84824

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Package Types
    1. 2.1 MicroSiP
    2. 2.2 QFN Overmolded
    3. 2.3 QFN Open Frame
    4. 2.4 Leaded
    5. 2.5 QFN-FCMOD
  6. 3Package CAD/CAE Symbols and Footprints
  7. 4Soldering
    1. 4.1 MSL Ratings
    2. 4.2 Reflow Profile
    3. 4.3 Back Side PCB Mounting Considerations
      1. 4.3.1 Method 1 - Solder Surface Perimeter
      2. 4.3.2 Method 2 - Solder Surface Area
      3. 4.3.3 Back Side PCB Mounting Evaluation of TI Modules
      4. 4.3.4 Reflow Fixture
  8. 5Rework During Prototyping
  9. 6References
  10. 7Revision History

2.3 QFN Open Frame

This QFN package consists of a multilayer laminate PCB with power IC, capacitors, resistors and inductor mounted on top. There is no molding compound encapsulating the circuitry. There is a direct access to the top of the inductor for potential heat transfer. See Figure 2-4 for an illustration.

GUID-3F2C1108-CE41-4DD8-8F3D-76CC7092C934-low.gifFigure 2-4 TPSM846C23 (15V, 35A) Module in PCB Laminate Open Frame QFN Package